***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Nov 24, 2024 7:09 pm


Board index » Mandolin - Mandola - Ukulele Forum

All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
dofthesea
 Post subject: Bolt on Necks
PostPosted: Sat Aug 06, 2022 9:52 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 785
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
For those of you that do bolt on necks, do you prefer one or two bolts. I've been using the inserts from Lmi. They're an 8-32 threading.

Whats your spacing from the top?

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/
Top
 Profile  
 
profchris
 Post subject: Re: Bolt on Necks
PostPosted: Sun Aug 07, 2022 4:04 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Feb 09, 2012 4:10 pm
Posts: 279
First name: Chris
Last Name: Reed
City: Stowmarket
State: Suffolk
Zip/Postal Code: IP14 2EX
Country: UK
Focus: Build
Status: Amateur
For a uke, one bolt is plenty. I place it around 2/3 way down from the fretboard.
Top
 Profile  
 
Ken Nagy
 Post subject: Re: Bolt on Necks
PostPosted: Sun Aug 07, 2022 7:19 am 
Online
Koa
Koa

Joined: Sat Mar 09, 2019 4:50 pm
Posts: 1254
Location: Goodrich, MI
First name: Ken
Last Name: Nagy
City: Goodrich
State: MI
Focus: Build
Status: Amateur
The adjustable neck on the Stauffer guitar copy I made only has one bolt. The joint fits tight. Where's it gonna go? It might have a 10-32, I don't remember. Brass insert with the sharp threads on the outside.

It is about 2/3's down too.

_________________
Why be normal?
Top
 Profile  
 
Barry Daniels
 Post subject: Re: Bolt on Necks
PostPosted: Sun Aug 07, 2022 8:44 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3263
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
I use two 1/4-20 bolts. 8-32 seems a bit small to me. I think only one of those would be a bit risky.

Edit: Are you sure they are 8-32? I was looking at the LMII website and they are listed as quarter inch bolts.
Top
 Profile  
 
Hesh
 Post subject: Re: Bolt on Necks
PostPosted: Sun Aug 07, 2022 10:45 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Ken Nagy wrote:
The adjustable neck on the Stauffer guitar copy I made only has one bolt. The joint fits tight. Where's it gonna go? It might have a 10-32, I don't remember. Brass insert with the sharp threads on the outside.

It is about 2/3's down too.


Yes but... string tension back then was much less than today. This was before steel strings so much less tension.

A couple of other points I'd like to make.

I also used 1/4" and they seemed about right, two of them.

And folks such as Dave and I get asked to add a strap button to someone's guitar daily it is perhaps, perhaps the single most common request after someone buys a guitar to add a strap button.

We like them 1/3 of the way down from the fret board surface to the bottom of the heel. With this said some small builders don't consider this and their bolts are in the way.... The major producers all take strap buttons into account or at least their bolt spacing does not interfere with a strap button conventionally located.
Top
 Profile  
 
J De Rocher
 Post subject: Re: Bolt on Necks
PostPosted: Sun Aug 07, 2022 12:44 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2520
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
I use two 10-24 hex head bolts with brass washers into 3/8" diameter barrel nuts in the tenon.

If you haven't seen it, this older thread has some discussion related to this: http://luthiersforum.com/forum/viewtopic.php?f=10101&t=54727&hilit=bolt+spacing

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


These users thanked the author J De Rocher for the post: dofthesea (Sun Aug 07, 2022 2:17 pm)
Top
 Profile  
 
dofthesea
 Post subject: Re: Bolt on Necks
PostPosted: Sun Aug 07, 2022 12:59 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 785
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
Barry,

These are the ones Ive been using.

https://www.lmii.com/neck-installation- ... -of-2.html

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/
Top
 Profile  
 
Barry Daniels
 Post subject: Re: Bolt on Necks
PostPosted: Sun Aug 07, 2022 6:41 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3263
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
I didn't realize this was the Uke forum. Ignore what I said.
Top
 Profile  
 
dofthesea
 Post subject: Re: Bolt on Necks
PostPosted: Mon Aug 08, 2022 9:23 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 785
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
Barry I was wondering about that lol

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Mandolin - Mandola - Ukulele Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 42 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com