***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 21, 2024 10:23 pm


Board index » OLF Doc-U-build

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 2
  [ 41 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
Jfurry
 Post subject: Macassar ebony 12string
PostPosted: Sun Aug 10, 2014 11:31 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Here's the beginning of my newest build. ( third build)
So far I've glued the back with tropical epoxy and scraped them. Proformaxed the sides to 90.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Jfurry
PostPosted: Sun Aug 10, 2014 11:33 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Sides and the clamping of the back


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Jfurry
PostPosted: Mon Aug 11, 2014 10:45 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
The cutaway is new for me so I'm excited to see how that gos together.
Haven't decided on neck yet, I'm thinking maple with Purple Heart. Carbon fiber will stretch into the body all the way under the finger board.
Top
 Profile  
 
Jfurry
PostPosted: Sat Aug 16, 2014 12:21 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Bent the sides today. Sanded the top to 150. Laminated a neck. Maple flamed hard rock ,outside and middle. On either side of the center maple two stringers of Purple Heart. 14 fret hope that made since .
Top
 Profile  
 
Jfurry
PostPosted: Sun Aug 17, 2014 5:39 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Update pics


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Jfurry
PostPosted: Sun Aug 17, 2014 5:43 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
So the neck is laminated.
Sides are bent.
Back is sanded to 90
I'll bend the cutaway piece on Monday and get the rims together .


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Jfurry
PostPosted: Wed Aug 20, 2014 11:25 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Today I put the back braces on and cut and installed the Rossette.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Jfurry
PostPosted: Fri Aug 22, 2014 2:57 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Working on the top. Rosette installed sanded to 120 with the proformax. Decided to do double cross braces. Cut them out of quarter sawn red spruce


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Jfurry
PostPosted: Sun Aug 24, 2014 1:57 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
red spruce braces cut and ready . Decided to double x brace,so i had to re engineer the insides. moved the top one up 1/2 inch and put the bottom one that would not be in the way of the pegs. took one tone bar out added a finger brace on the other side. Hope that made since. sanded edges of the side to the correct angles.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Jfurry
PostPosted: Mon Aug 25, 2014 10:13 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Bracing is glued on the soundboard. Kerfing is installed and angle sanded. Will be away from the shop for a couple days.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
DriftwoodGuitars
PostPosted: Fri Sep 05, 2014 10:27 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Mar 08, 2014 8:54 pm
Posts: 135
Location: Santa Rosa Beach, FL
First name: Chris
Last Name: Alvarado
City: Santa Rosa Beach
State: FL
Zip/Postal Code: 32439
Country: USA
Focus: Build
Status: Professional
Interesting bracing. Do you still have to shave the braces in the last pic? If not, it looks way over braced in my opinion. You can take off quite a bit of the meat on those to loosen and open her up. She looks good so far though!

_________________
Chris Alvarado
www.ChrisAlvaradoLive.com
www.Driftwood-Guitars.com


These users thanked the author DriftwoodGuitars for the post: Jfurry (Sat Sep 27, 2014 10:49 pm)
Top
 Profile  
 
Jfurry
PostPosted: Sat Sep 06, 2014 7:03 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Chris, yes the braces haven't been shaved in that pic just first shaping with the edge sander. I haven't been to the shop for a week stuck in the day job.
Top
 Profile  
 
Jfurry
PostPosted: Tue Sep 09, 2014 9:46 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Got the box together today, fret board slotted . Picture of the shaved braces.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Jfurry
PostPosted: Tue Sep 09, 2014 9:49 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
And


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
dzsmith
PostPosted: Fri Sep 19, 2014 4:36 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Looking good, Jeff!
I wish I had the skills to make an acoustic.
I'm still reading books and the postings here.
I need to improve my woodworking skills and learn how to use hand tools.
Gonna look sweet shined up!
I dig the Ebony.
Dan

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
Jfurry
PostPosted: Sun Sep 21, 2014 10:09 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Nice of you Dan. I'm pretty certain our skills blow mine out of the water. I really dig the ebony also,can't wait to get back to it after a week or so away.
Top
 Profile  
 
Jfurry
PostPosted: Wed Sep 24, 2014 1:33 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Carbon through the neck and into the body.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Jfurry
PostPosted: Sat Sep 27, 2014 10:46 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Headstock ready to engrave, bridge ready to cut,


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Bobc
PostPosted: Sun Oct 19, 2014 10:22 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 9:42 pm
Posts: 4217
Location: Buffalo, NY
First name: Robert
Last Name: Cefalu
City: Buffalo
State: NY
Zip/Postal Code: 14217
Country: US
So where's the pic's off the finished guitar???

_________________
Beautiful and unusual tone woods at a reasonable price.
http://www.rctonewoods.com/RCT_Store
The Zootman
1109 Military Rd.
Kenmore, NY 14217
(716) 874-1498
Top
 Profile  
 
Jfurry
PostPosted: Sun Oct 19, 2014 2:33 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Getting close Bob.Yesterday I finished the head stock and glued the finger board on.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Bobc
PostPosted: Sun Oct 19, 2014 4:56 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 9:42 pm
Posts: 4217
Location: Buffalo, NY
First name: Robert
Last Name: Cefalu
City: Buffalo
State: NY
Zip/Postal Code: 14217
Country: US
Nice! Really nice. [clap]

_________________
Beautiful and unusual tone woods at a reasonable price.
http://www.rctonewoods.com/RCT_Store
The Zootman
1109 Military Rd.
Kenmore, NY 14217
(716) 874-1498
Top
 Profile  
 
Jfurry
PostPosted: Mon Nov 17, 2014 12:04 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Should be starting the finish tomorrow. To many days off are hard on the novice builder.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Jfurry
PostPosted: Mon Nov 17, 2014 12:06 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Thanks Bob.
Top
 Profile  
 
dzsmith
PostPosted: Mon Nov 17, 2014 8:44 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Fantastic, Jeff!
I really like the headstock.

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
Jfurry
PostPosted: Tue Nov 18, 2014 9:08 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Jul 12, 2014 3:50 pm
Posts: 266
First name: Jeff
Last Name: Dillard
State: California
Focus: Build
Status: Amateur
Thanks Dan , I really like Steve's style as well. Toda I should be sealing it. Man this one seems to be taking forever. [headinwall]
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 41 posts ]  Go to page 1, 2  Next

Board index » OLF Doc-U-build

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com