Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 1:06 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 15 posts ] 
Author Message
 Post subject: Issues gluing Sapele
PostPosted: Thu Aug 22, 2013 9:54 am 
Offline
Walnut
Walnut

Joined: Sat May 22, 2010 6:19 pm
Posts: 29
First name: Andy
Last Name: Schrider
City: Fort Myers
State: FL
Zip/Postal Code: 33913
Country: United States
Focus: Build
Status: Amateur
Very weird....I'm building my first electric guitar, but I've been working with wood for a long time. I'm putting a 1/4 sapele face on the back and for some reason I'm having trouble gluing the book-matched pieces together. I've always used Titebond, but for some reason the joint won't hold and I can actually just pull the two pieces apart after letting it dry for about 24 hours. Has anyone else had this issue? Any suggestions? Thanks!


Top
 Profile  
 
 Post subject: Re: Issues gluing Sapele
PostPosted: Thu Aug 22, 2013 10:56 am 
Online
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5823
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
How old is your Titebond?

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
 Post subject: Re: Issues gluing Sapele
PostPosted: Thu Aug 22, 2013 11:10 am 
Offline
Walnut
Walnut

Joined: Sat May 22, 2010 6:19 pm
Posts: 29
First name: Andy
Last Name: Schrider
City: Fort Myers
State: FL
Zip/Postal Code: 33913
Country: United States
Focus: Build
Status: Amateur
That is a good question. Probably less than 8 months old. It's Titebond II and it's been working fine on maple.


Top
 Profile  
 
 Post subject: Re: Issues gluing Sapele
PostPosted: Thu Aug 22, 2013 11:23 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Sapele is usually not a problem to glue.....try cleaning your freshly joined edges with some DA prior to glue up. Perhaps this piece has a high resin content, that should take care of that.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
 Post subject: Re: Issues gluing Sapele
PostPosted: Thu Aug 22, 2013 11:26 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 05, 2013 12:57 pm
Posts: 903
Location: London, England
Focus: Build
Status: Amateur
Silly question, Brian: What is DA? I'll be needing some for gluing Teak soon, I'm sure, if it helps with high resin/oil content.

Cheers,
Nick


Top
 Profile  
 
 Post subject: Re: Issues gluing Sapele
PostPosted: Thu Aug 22, 2013 11:32 am 
Offline
Walnut
Walnut

Joined: Sat May 22, 2010 6:19 pm
Posts: 29
First name: Andy
Last Name: Schrider
City: Fort Myers
State: FL
Zip/Postal Code: 33913
Country: United States
Focus: Build
Status: Amateur
Denatured Alcohol.

Thanks, Brian that is a good idea. I will try that and re-post.


Top
 Profile  
 
 Post subject: Re: Issues gluing Sapele
PostPosted: Thu Aug 22, 2013 11:40 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 05, 2013 12:57 pm
Posts: 903
Location: London, England
Focus: Build
Status: Amateur
I knew it was a silly question. What's 2+2 again? :)


Top
 Profile  
 
 Post subject: Re: Issues gluing Sapele
PostPosted: Thu Aug 22, 2013 11:49 am 
Offline
Walnut
Walnut

Joined: Sat May 22, 2010 6:19 pm
Posts: 29
First name: Andy
Last Name: Schrider
City: Fort Myers
State: FL
Zip/Postal Code: 33913
Country: United States
Focus: Build
Status: Amateur
No silly questions! Just don't drink the DA!


Top
 Profile  
 
 Post subject: Re: Issues gluing Sapele
PostPosted: Thu Aug 22, 2013 11:54 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 05, 2013 12:57 pm
Posts: 903
Location: London, England
Focus: Build
Status: Amateur
Not even with a mixer? :)


Top
 Profile  
 
 Post subject: Re: Issues gluing Sapele
PostPosted: Thu Aug 22, 2013 2:47 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
Nick Royle wrote:
I knew it was a silly question.


There are no silly questions...just silly assumptions.

When joining Sapele I only use Titebond and have never had problems.

I can only think of two things...bad glue...or contaminated surfaces.

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic



These users thanked the author Stuart Gort for the post: Nick Royle (Fri Aug 23, 2013 2:14 pm)
Top
 Profile  
 
 Post subject: Re: Issues gluing Sapele
PostPosted: Fri Aug 23, 2013 1:14 pm 
Offline
Walnut
Walnut

Joined: Sat May 22, 2010 6:19 pm
Posts: 29
First name: Andy
Last Name: Schrider
City: Fort Myers
State: FL
Zip/Postal Code: 33913
Country: United States
Focus: Build
Status: Amateur
Third attempt on this glue up. Re-jointed, wiped down with DA, and tight clamps. Just a little bit better but still able to bend the joint. I think it's time to give up on this billet! I'm pissed that I already planned to add the thickness on the back and planed down my mahogany body. Now I need to find a maple cap for the back.


Top
 Profile  
 
 Post subject: Re: Issues gluing Sapele
PostPosted: Fri Aug 23, 2013 3:46 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Nov 16, 2012 12:27 am
Posts: 124
First name: Jimmy
Last Name: Edwards
City: Boston
State: MA
Focus: Build
Status: Professional
Next time only try to use Titebond I, with the red label. The other one should have held, but you probably didn't have a clean joint and not enough surface to glue. I know titebond II is not recommended by all the luthiers I have ever seen talk about it.


Top
 Profile  
 
 Post subject: Re: Issues gluing Sapele
PostPosted: Sat Aug 24, 2013 6:09 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
I agree, titebond 1 is preferred for this game. But I have glued more Sapele than I can remember with the type 2 without any problems.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
 Post subject: Re: Issues gluing Sapele
PostPosted: Wed Aug 28, 2013 1:41 pm 
Offline
Walnut
Walnut

Joined: Sat May 22, 2010 6:19 pm
Posts: 29
First name: Andy
Last Name: Schrider
City: Fort Myers
State: FL
Zip/Postal Code: 33913
Country: United States
Focus: Build
Status: Amateur
Thank you JEguitars and everyone else. I re-jointed AGAIN and used Titebond Original and it worked. Thank you for the help everybody!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com