***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Nov 26, 2024 11:29 am


Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 5
  [ 102 posts ]  Go to page 1, 2, 3, 4, 5  Next
  Print view Previous topic | Next topic 
Author Message
Tayser
 Post subject: Hand carving top
PostPosted: Fri Aug 23, 2013 10:13 pm 
Offline
Mahogany
Mahogany

Joined: Sat Jun 16, 2012 2:37 am
Posts: 62
First name: Dave
Last Name: Tays
Country: canada
Focus: Build
Status: Amateur
does anyone know of any good youtube videos or even dvds on hand carving guitar tops. I have seen a few that seem crude. I would like to see one where they are binding as well. any suggestions would be appreciated.
Top
 Profile  
 
JEguitars
 Post subject: Re: Hand carving top
PostPosted: Sat Aug 24, 2013 12:16 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Nov 16, 2012 12:27 am
Posts: 124
First name: Jimmy
Last Name: Edwards
City: Boston
State: MA
Focus: Build
Status: Professional
Look up MUX guitars, then go to his youtube videos, very good tutorial on carving a top. he is verhoevenc on here or something like that.


These users thanked the author JEguitars for the post: Tayser (Sat Aug 24, 2013 10:42 am)
Top
 Profile  
 
Tayser
 Post subject: Re: Hand carving top
PostPosted: Sat Aug 24, 2013 10:47 am 
Offline
Mahogany
Mahogany

Joined: Sat Jun 16, 2012 2:37 am
Posts: 62
First name: Dave
Last Name: Tays
Country: canada
Focus: Build
Status: Amateur
That was a good tutorial. but it did bring up another question. After you have everything curved how hard is it to route the neck cavity if your using a bolt on neck? wouldnt your curve give you a lopsided neck pocket? I have only routed out a neck cavity once and it was on a flat surface so it was pretty easy.
Top
 Profile  
 
dzsmith
 Post subject: Re: Hand carving top
PostPosted: Sat Aug 24, 2013 1:18 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
You da man, Chris!
Is it weird building right-hand guitars being a left-handed fellow?
Thanks for the great video,
Dan

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
JEguitars
 Post subject: Re: Hand carving top
PostPosted: Sat Aug 24, 2013 1:46 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Nov 16, 2012 12:27 am
Posts: 124
First name: Jimmy
Last Name: Edwards
City: Boston
State: MA
Focus: Build
Status: Professional
Tayser, I always route my neck pocket before I do my top carve.
Top
 Profile  
 
JEguitars
 Post subject: Re: Hand carving top
PostPosted: Sat Aug 24, 2013 5:39 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Nov 16, 2012 12:27 am
Posts: 124
First name: Jimmy
Last Name: Edwards
City: Boston
State: MA
Focus: Build
Status: Professional
Chris has a lot of good tutorials up on youtube. Just look through all his videos.
Top
 Profile  
 
Tayser
 Post subject: Re: Hand carving top
PostPosted: Sat Aug 24, 2013 7:57 pm 
Offline
Mahogany
Mahogany

Joined: Sat Jun 16, 2012 2:37 am
Posts: 62
First name: Dave
Last Name: Tays
Country: canada
Focus: Build
Status: Amateur
Lol. Hey Chris nice tutorial but why be a dick?
Top
 Profile  
 
dzsmith
 Post subject: Re: Hand carving top
PostPosted: Sat Aug 24, 2013 9:16 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
verhoevenc wrote:
Or... once again DO SOME GOOGLE SEARCHING BEFORE ASKING QUESTIONS. This video, also mine, was right next to that one in the "related videos" probably...

Chris
PS: It's easy, cause although being a lefty, I build, and play, right handed guitars :)

Cool Chris, I thought maybe you played like a "mirrored" Hendrix.

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
ChuckH
 Post subject: Re: Hand carving top
PostPosted: Sat Aug 24, 2013 9:38 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jan 24, 2008 8:01 am
Posts: 1399
Location: Houston, TX
First name: Chuck
Last Name: Hutchison
City: Houston
State: Texas
Country: United States
Focus: Build
Status: Amateur
Tayser, you ask any question you like. Believe it or not there are a lot of very friendly and helpful people here.


Sent from my walkie talkie using Tapatalk

_________________
"After forty-nine years of violin building, I have decided that the search for a varnish is similar to the fox hunt. The fun is in the hunt."
Jack Batts Maker and Repairer of Fine Violins


These users thanked the author ChuckH for the post: Tayser (Sat Aug 24, 2013 10:46 pm)
Top
 Profile  
 
Tayser
 Post subject: Re: Hand carving top
PostPosted: Sat Aug 24, 2013 9:44 pm 
Offline
Mahogany
Mahogany

Joined: Sat Jun 16, 2012 2:37 am
Posts: 62
First name: Dave
Last Name: Tays
Country: canada
Focus: Build
Status: Amateur
I have to say i respect your answer.
Top
 Profile  
 
JEguitars
 Post subject: Re: Hand carving top
PostPosted: Sat Aug 24, 2013 10:03 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Nov 16, 2012 12:27 am
Posts: 124
First name: Jimmy
Last Name: Edwards
City: Boston
State: MA
Focus: Build
Status: Professional
I also say ask whatever you want. It's a forum designed just for that. I am decent enough at building guitars, but when it comes to wiring I sometimes have to ask a lot of questions. ALL Questions keep the forum active and alive and are welcomed.


These users thanked the author JEguitars for the post: Tayser (Sat Aug 24, 2013 10:46 pm)
Top
 Profile  
 
JEguitars
 Post subject: Re: Hand carving top
PostPosted: Sun Aug 25, 2013 1:18 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Nov 16, 2012 12:27 am
Posts: 124
First name: Jimmy
Last Name: Edwards
City: Boston
State: MA
Focus: Build
Status: Professional
verhoevenc wrote:
Hey Chuck. Thanks for the further implication of not being friendly. However, I answered his question, no? Twice actually! Even when I took issue with stuff. And before he asked "why be a dick?" all I did was tell him he should google stuff (without profanity or name calling I might add). Now, I said more after that... but he literally asked for an explanation.
I'd argue that still makes me pretty dang nice... just not hand-holdy. I believe your response handled that part just fine.
I'd argue that in the end, he's more happy to have gotten information than the pat on the back ;)
Chris


Chris,
I think you are an extremely talented builder, much better than I am by a long shot, your wood purfling and binding are second to none. And your videos are very helpful and you explain a lot. But you tend to police these boards about what people can ask and post. We didn't all have experienced luthiers like you had such as David Myka and Todd Stock to show us the ropes. If he wants to ask basic questions, it doesn't matter. Let him ask. It isn't hurting anyone.


Last edited by JEguitars on Sun Sep 08, 2013 12:44 pm, edited 2 times in total.

Top
 Profile  
 
Paul Moore
 Post subject: Re: Hand carving top
PostPosted: Sun Aug 25, 2013 3:10 pm 
Offline
Walnut
Walnut

Joined: Fri Jul 05, 2013 12:40 pm
Posts: 1
First name: Paul
Last Name: Moore
City: Hot Springs
State: AR
Zip/Postal Code: 71913
Country: USA
Focus: Build
Status: Amateur
O.K. Though I rarely post on forums, I feel the need to defend Chris. A few years back he sent me a beautiful unfinished anigre and black walnut guitar body along with the matching neck. It was guitar of his own design and has an ebony fretboard with meticulously done inlays of the solar system. It even has fiber optic fret markers. He did this so that I could have the opportunity to learn how to carve a neck, fret, route pickup cavities, install a bridge, etc. He GAVE it to me for FREE. We did not know each other, so this was not like giving it to a good friend or family. He did this out of the kindness of his heart and asked nothing in return. Not only is he very talented, he is generous. Just thought I would share.
Top
 Profile  
 
Chris Pile
 Post subject: Re: Hand carving top
PostPosted: Sun Aug 25, 2013 3:15 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5823
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Be thankful this isn't like some of the car guy forums I visit daily.
There are a lot of self-appointed bouncers and trolls who try to keep all the FNG's and regulars in line with their particular vision of forum conduct.

_________________
"Act your age, not your shoe size" - Prince
Top
 Profile  
 
Frank Cousins
 Post subject: Re: Hand carving top
PostPosted: Sun Aug 25, 2013 3:29 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Sep 30, 2008 8:57 am
Posts: 544
Location: Auchtermuchty, Fife, Scotland
Focus: Build
Status: Amateur
Chris I appreciate your point... but... say someone is new to all this, does a google search and finds this forum first - wow! a place where loads of experienced folk hang out might be a better place to sart asking questions, than on You tube, where its tricky to maybe determine whether the advice is good, bad, or indiffrent?

I dont believe its a case of someone not valuing your time in answering - but would take it as a complement to those experienced folk on here, that this is THE first place of call for sound, correct advice and opinion?

You have been more than helpful in directing the OP, and even more so in taking the time to produce such excellent videos and sharing your experience and knowledge. I dont believe for one moment that this is not appreciated, or undermined by someone coming direct. Afterall, is not finding this site, checking out the quality of work done and then posting a question not a decent bit of research in itself?
Top
 Profile  
 
ChuckH
 Post subject: Re: Hand carving top
PostPosted: Sun Aug 25, 2013 4:54 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jan 24, 2008 8:01 am
Posts: 1399
Location: Houston, TX
First name: Chuck
Last Name: Hutchison
City: Houston
State: Texas
Country: United States
Focus: Build
Status: Amateur
Tayser, check out "Archtop Guitar Design & Construction" DVD's by Robert Benedetto. Some good info in the 4 disc set.


Sent from my walkie talkie using Tapatalk

_________________
"After forty-nine years of violin building, I have decided that the search for a varnish is similar to the fox hunt. The fun is in the hunt."
Jack Batts Maker and Repairer of Fine Violins


These users thanked the author ChuckH for the post: Tayser (Sun Aug 25, 2013 8:01 pm)
Top
 Profile  
 
Tayser
 Post subject: Re: Hand carving top
PostPosted: Sun Aug 25, 2013 6:52 pm 
Offline
Mahogany
Mahogany

Joined: Sat Jun 16, 2012 2:37 am
Posts: 62
First name: Dave
Last Name: Tays
Country: canada
Focus: Build
Status: Amateur
There was no edit whatsoever. That's exactly what I wrote when I asked the first question. I'm not trying to make you look bad. But don't be writing things that are not true.
Top
 Profile  
 
Tayser
 Post subject: Re: Hand carving top
PostPosted: Sun Aug 25, 2013 7:06 pm 
Offline
Mahogany
Mahogany

Joined: Sat Jun 16, 2012 2:37 am
Posts: 62
First name: Dave
Last Name: Tays
Country: canada
Focus: Build
Status: Amateur
I didn't ask the question to start an argument. I asked because one of the videos I watch on a bell curve. He did it with a grinder. I couldn't see myself using that method so I thought I would ask. Plus EJ told me first to look up your tutorial which I did. There was no need of you posting the YouTube. That was you wasting your time. The second question your right I didn't research it all. I watched the tutorials of you doing the bell curve and I watched you putting on the binding. I didn't see the one about the neck pocket. Did I look that hard absolutely not. While I was watching all I was thinking is how is this guy going to route the neck pocket. So I thought I would ask. When you replied I thought you were being a dink so I asked why. I respected your answer and appreciated the private message you sent me today. I believe I thanked you for it. Why all the drama is beyond me. I have no problems with any of you. All this Internet arguing is childish. I like the days of a group of men talking and you had a disagreement you either worked it out or put up your fist. It saved all this soap opera drama for old ladies in the afternoon.


These users thanked the author Tayser for the post: the Padma (Mon Aug 26, 2013 11:36 pm)
Top
 Profile  
 
JEguitars
 Post subject: Re: Hand carving top
PostPosted: Sun Aug 25, 2013 8:41 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Nov 16, 2012 12:27 am
Posts: 124
First name: Jimmy
Last Name: Edwards
City: Boston
State: MA
Focus: Build
Status: Professional
HRE HOOK AARR JAWBS!
Top
 Profile  
 
JEguitars
 Post subject: Re: Hand carving top
PostPosted: Sun Aug 25, 2013 8:44 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Nov 16, 2012 12:27 am
Posts: 124
First name: Jimmy
Last Name: Edwards
City: Boston
State: MA
Focus: Build
Status: Professional
verhoevenc wrote:
Tayser wrote:
There was no edit whatsoever. That's exactly what I wrote when I asked the first question. I'm not trying to make you look bad. But don't be writing things that are not true.


If that's true I apologize, but for the life of my I do not remember any of those additional details. As per my response, where I literally said, "Now, if you had come on and said something like "I've found these videos _______________, _______________, and _____________. What do ya'll think? Which should I go by?" That's different. You'd have both shown initiative and be asking for opinion, not spoon-feeding." I really cannot see myself saying that if you literally had stuff pointing the the contrary.

<rant>
That said, as for the bickering; there's a decent amount of folks on here that if you don't make all answers super nice and peachy they get all bent out of shape. Telling someone to Google apparently hits that nerve (although I suspect they're more taken with my response to your "why be a dick" question... but I feel I was just answering an honest question hahah). You can't criticize elements of people's builds, if something is blatantly wrong you can't say anything... etc. It's this new idea from recent decades that everyone gets a participation award. As far as I'm concerned, this lack of honesty, hand holding, spoon feeding, etc. encourages the continuance of not improving one's self/work (and people on American Idol that have been told they can sing all their life when they sound like a donkey). This ultra-PC view doesn't really do anyone any good in the long run as far as I'm concerned.
</rant>
Chris



For the record, if you ever find anything wrong with my builds, I would appreciate you pointing it out. I want to get better and better, and having somoene else's eye can be very helpful.
Top
 Profile  
 
Tony_in_NYC
 Post subject: Re: Hand carving top
PostPosted: Mon Aug 26, 2013 10:52 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
I just spent the last 30 minutes watching South Park clips. Thanks Chris.

_________________
http://www.CostaGuitars.com
PMoMC
Top
 Profile  
 
theguitarwhisperer
 Post subject: Re: Hand carving top
PostPosted: Thu Aug 29, 2013 8:17 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional
There's a way to say something, and a way not to.

There's valid criticism delivered responsibly, and there's feather ruffling.

There's peeing off noobs so that they leave "your" forum alone and don't clog it up with useless questions, and there's, well, going somewhere else.

Posting a video of your own making is INVITING followup questions. Telling someone to google any more information after that before annoying you with more questions is being a dick.

Answering the question "Why are you being a dick?" with a sentence starting with "Because I don't appreciate blah blah blah" is admitting being a dick.

Telling the poor guy who asked a question that it's OKAY to ask questions, that's why we're members of a forum, after being dissed, is not Hand-Holding.

_________________
Old growth, shmold growth!


Last edited by theguitarwhisperer on Thu Aug 29, 2013 8:23 pm, edited 1 time in total.

These users thanked the author theguitarwhisperer for the post: nutsdan (Sun Sep 01, 2013 1:09 am)
Top
 Profile  
 
theguitarwhisperer
 Post subject: Re: Hand carving top
PostPosted: Thu Aug 29, 2013 8:22 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional
Tayser wrote:
Lol. Hey Chris nice tutorial but why be a dick?


verhoevenc wrote:
Because I don't appreciate people who do no research of their own and expect others to spoon feed them. Simple as that.



Before it gets changed...........

_________________
Old growth, shmold growth!
Top
 Profile  
 
the Padma
 Post subject: Re: Hand carving top
PostPosted: Thu Aug 29, 2013 8:29 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
theguitarwhisperer wrote:
There's a way to say something, and a way not to.

There's valid criticism delivered responsibly, and there's feather ruffling.

There's peeing off noobs so that they leave "your" forum alone and don't clog it up with useless questions, and there's, well, going somewhere else.

Posting a video of your own making is INVITING followup questions. Telling someone to google any more information after that before annoying you with more questions is being a dick.

Answering the question "Why are you being a dick?" with a sentence starting with "Because I don't appreciate blah blah blah" is admitting being a dick.

Telling the poor guy who asked a question that it's OKAY to ask questions, that's why we're members of a forum, after being dissed, is not Hand-Holding.



Amen! laughing6-hehe

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.


.
Top
 Profile  
 
John A
 Post subject: Re: Hand carving top
PostPosted: Fri Aug 30, 2013 8:15 am 
Offline
Koa
Koa
User avatar

Joined: Thu Sep 24, 2009 9:50 am
Posts: 941
Location: Ellicott City, Md - USA
First name: John
Last Name: A
Focus: Build
Status: Amateur
Quote:
It's this new idea from recent decades that everyone gets a participation award.


you will see this in my signature - just so you know Chris - your rant was appreciated.

_________________
It's this new idea from recent decades that everyone gets a participation award. - MUX
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 5
  [ 102 posts ]  Go to page 1, 2, 3, 4, 5  Next

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours


Who is online

Users browsing this forum: Bing [Bot] and 31 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com