***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 3:43 pm


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
canerider
 Post subject:
PostPosted: Mon Oct 08, 2007 3:59 am 
Offline
Walnut
Walnut

Joined: Fri Oct 05, 2007 4:25 am
Posts: 4
Location: Virgin Islands





Joined: 05 October 2007
Country / Location: Virgin Islands
Online Status: Online
Posts: 2 		Fret files






Posted: 06 October 2007 at 10:09am | IP Logged Quote canerider    Quote canerider


 First of all thanks alot for your replies and welcome. That was a great link and my problems pretty squarely fall under the uneven fret category.
I have low frets top E and B string around fret 3-7. Too much blues in A! Any previous fret work I have tackled has been with various grades of  wet and dry paper and a flat as you suggest. This worked well as it was nice and slow. But how to get rid of the flat fret tops after?
I am prettysure the truss rod adj is fine.



Top
 Profile  
 
Michael Dale Payne
 Post subject:
PostPosted: Mon Oct 08, 2007 6:11 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
with a Dressing file like this


Top
 Profile  
 
Michael Dale Payne
 Post subject:
PostPosted: Mon Oct 08, 2007 6:15 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
It will file the fret to round from the sides inward Stop when you have a very fine thin at the center of the fret .005" or less. Then you need just to polish them out. This is called dressing the fret.
Top
 Profile  
 
burbank
 Post subject:
PostPosted: Mon Oct 08, 2007 6:54 am 
Offline
Koa
Koa
User avatar

Joined: Mon Sep 12, 2005 12:40 am
Posts: 1900
Location: Spokane, Washington
First name: Pat
Last Name: Foster
State: Eastern WA
Focus: Build
If access to a crowning/dressing file is a problem where you're located, a square or rectangular or triangle shaped file can be used after you smooth off the corners of the file to prevent damaging the fretboard. Here's a pic from frets.com. Notice the rounded areas on the edges, not just at the end.

Use it the same way Michael described above, only you have to file on each side of each fret.

Good luck!

_________________
now known around here as Pat Foster
_________________
http://www.patfosterguitars.com
Top
 Profile  
 
canerider
 Post subject:
PostPosted: Mon Oct 08, 2007 8:07 am 
Offline
Walnut
Walnut

Joined: Fri Oct 05, 2007 4:25 am
Posts: 4
Location: Virgin Islands
 Thankyou gentlemen.... and thanks for reminding me to listen again to that great Richard Thompson tune!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 43 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com