Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Dec 11, 2024 6:39 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject:
PostPosted: Thu Aug 09, 2007 11:28 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas
This is an SJ for my son. He graduates college tomorrow. Warren help me build the side bender for this guitar. He's checked the shop regularly to see it still on the shelf. Lately he's been too busy to look.

It won't be completely ready by tomorrow, but it won't be long now. Sorry for the pic quality. I'll take some nice ones later. Luthier's like this sort of thing. What's in your booth?

This is premium Indian Rosewood from LMI, maple bindings a gift from Bob Steidl. A cedar top from Ed Dicks. The bracing is Adirondack with a black walnut bridge plate. This guitar will get a set of K and K's triple bridgeplate pickups.

I decided to try epoxy fill again. It worked very well, but not perfect. I should have done at least one more coat. I did an alcohol wipe, to level the surface while still workable. I believe that step removed epoxy from many pores in the rosewood. But I'll sure try again, because it was a marked improvement over other past attempts to pore fill.










_________________
http://www.dickeyguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 09, 2007 11:35 am 
Offline
Koa
Koa

Joined: Mon May 09, 2005 1:41 am
Posts: 1157
Location: Siloam Springs, AR
Well it's not in a booth, but it'll be ready for French polishing when I sand off this pore filler. That's Hibdon granadillo under there.


_________________
______________________________
Jonathan Kendall, Siloam Springs AR


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 09, 2007 1:43 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas
Only every time I pull the trigger.

IF you look closely folks, the explosion proof fan is indeed in picture number three.

See the orange air hose on the lower right? The green thing on the lower left is an explosion proof fan and part of one aluminum blade is showing too.

Anyone remember TG&Y? It's a defunct five and dime store. The fan in the window is twenty-five years old it's a TG&Y brand with three speeds. I set it on high. The booth is a Sony big screen TV box held in place with two by four spruce framing. Works, that's all I can say.


_________________
http://www.dickeyguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 09, 2007 2:28 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas
What's in your spray booth?

_________________
http://www.dickeyguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 09, 2007 2:46 pm 
Offline
Koa
Koa

Joined: Wed Aug 24, 2005 11:13 am
Posts: 1398
Location: United States
Three jumbo acoustics (one is a bari), two Model 1 electrics, six Renaissance semi-hollows, about six or seven Ribbecke Halflings and even more Dean American mades, four or five ukes, uhhh maybe a couple of classicals, etc., etc. Some of that pile is Addam Stark work...


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 10, 2007 12:44 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
Not a thing but plan to chang that in about 20 days


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 10, 2007 1:19 am 
Offline
Walnut
Walnut

Joined: Tue Jun 26, 2007 3:04 am
Posts: 14
Location: United States

[QUOTE=Rick Turner]Three jumbo acoustics (one is a bari), ..[/QUOTE]


Sure would like to hear a sound clip of that baritone of yours, Rick.  Would there be anything you might point me to?  I enjoy your work and your posts, but haven't been able to lay hands or ears on one of your guitars.


As a note to the forum in general, sound clips would be a great addition to the info presented here.  I realize that there's a lot of ambiguity in recording methods, equipment, etc, or, in my case, lack of true musical talent.  Just a strum or so would give an idea.


I'm a newb/lurk type here, but at this time I'm expanding my little shop to include building.  All I do now is repairs.  'Fraid I'm hooked tho.


Dave


 


 



Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 10, 2007 3:01 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Sep 09, 2005 7:51 am
Posts: 3786
Location: Canada
Just this one .... trying to get it to cure stage before next weeks time off ....

I think you can guess the woods ....






_________________
Tony Karol
www.karol-guitars.com
"let my passion .. fulfill yours"


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 10, 2007 3:42 am 
Offline
Koa
Koa
User avatar

Joined: Mon Sep 12, 2005 12:40 am
Posts: 1900
Location: Spokane, Washington
First name: Pat
Last Name: Foster
State: Eastern WA
Focus: Build
Not in a booth, since I don't have one, but here's a 000 I've been working on forever. Just has first Z-poxy fill coat, will get FP.





[QUOTE=uncledave]I'm a newb/lurk type here, but at this time I'm expanding my little shop to include building. All I do now is repairs. 'Fraid I'm hooked tho.

Dave


[/QUOTE]

Welcome, Dave!

Your handle brings to mind a banjo player from days gone by.


_________________
now known around here as Pat Foster
_________________
http://www.patfosterguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Sat Aug 11, 2007 3:24 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas
Jon, Tony, and Pat, Wow, it's great seeing your creations.

It is just amazing what the human mind can conceive and tenacity to get something done.

My son liked his guitar last evening. He'll like it better of course when it's strung up. I was amazed when measuring the tail of that SJ while looking for a case. It was a full 4 7/8". Dred case from Cedar Creek was all I had it would slide into.

Anyone else?

_________________
http://www.dickeyguitars.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com