Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 30, 2024 6:43 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 20 posts ] 
Author Message
 Post subject: French polish problem
PostPosted: Thu Dec 28, 2023 1:40 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Nov 19, 2005 10:54 am
Posts: 378
Location: Between Bordeaux and the Atlantic. S.W.France
Can anyone help with shellac mixing problem?
I’ve French polished a few instruments, or parts of them, with a reasonable amount of success, but I have problems when mixing a new solution. I use the Stewmac flakes and 95° alcohol. Working from the Milburn tutorial I try to mix a 1lb cut. As I’m English but live in France, we don’t have pounds and ounces or gallons even though I know what they are, and anyway US gallons aren’t the same as British ones (go figure!), so I worked out the proportions and calculated that for a 1lb cut I’d need to dissolve 24 grammes of flakes in 200 ml. of alcohol.
Milburn (and Stewmac) say it dissolves easier if you whizz the flakes in a coffee grinder so I did that. I also put my jar in a pan of hot water because that should help too. I’ve been stirring it and warming it for a week now and it still looks like this. The cloudy part at the bottom is the undissolved granules. You can also see them stuck to the sides further up from when I stirit.
Any polite suggestions as to what I should do with it?


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Thu Dec 28, 2023 2:38 pm 
Offline
Walnut
Walnut
User avatar

Joined: Wed Nov 16, 2022 9:11 am
Posts: 23
First name: Craig
Last Name: Wilson
City: Richmond
State: Ontario
Country: Canada
Focus: Build
Find yourself a magnetic stirrer. Many online are laboratory grade with hot plates, but you can find basic battery or usb powered ones on Amazon for cheap. One of those will dissolve your shellac in an hour or so.

_________________
Craig


Top
 Profile  
 
PostPosted: Thu Dec 28, 2023 2:42 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2969
Location: United States
Are you sure thee cloudy part at the bottom is undisolved? It looks like wax to me.

_________________
Jim Watts
http://jameswattsguitars.com


Top
 Profile  
 
PostPosted: Thu Dec 28, 2023 2:50 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 789
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
What brand is your shellac flakes and how old? Is it waxed or dewaxed?

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/


Top
 Profile  
 
PostPosted: Thu Dec 28, 2023 3:08 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7380
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
I saw a post I think from Alan Carruth where he recommended using a loose leaf tea bag suspended by a toothpick just barely touching the alcohol to dissolve the flakes. Never tried it though…


Top
 Profile  
 
PostPosted: Thu Dec 28, 2023 3:43 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968
I would decant off some of the top liquid and test it to see how well it dries. If the flakes are too old, what does dissolve may not dry well.
You could run it through a coffee filter to filter out some of the wax and impurities and then try adding more alcohol to try to dissolve any remaining shellac.

I've read the more highly processed (lighter colored) flakes go bad sooner than the darker less processed stuff . I've had them go bad after a year.


Last edited by Clay S. on Thu Dec 28, 2023 4:17 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Thu Dec 28, 2023 4:04 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat May 17, 2008 1:11 pm
Posts: 2375
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build
Hi, Dave! Like Jim said, it looks like wax. I'd try another source of flakes that sells a lot of shellac. The majority of SM customers don't do FP shellac (not to disparage SM at all or their customers—myself included), so their stock might not be the freshest. Try someone like shellac.net, whose stock probably moves more quickly. I've had good luck also with VJay's shellac at shellacfinishes.com or woodfinishingenterprises.com

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com


Top
 Profile  
 
PostPosted: Thu Dec 28, 2023 5:17 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Nov 19, 2005 10:54 am
Posts: 378
Location: Between Bordeaux and the Atlantic. S.W.France
dofthesea wrote:
What brand is your shellac flakes and how old? Is it waxed or dewaxed?

It's Stewmac, dewaxed, but it is old, perhaps 10 years or more but I thought if it was in an airtight container it should be OK.
Attachment:
Shellac 2.JPG


In fact I used the last of my previous mix 6 months ago on the front of this, and it worked OK
Attachment:
4 - Copie.JPG


Jim Watts wrote:
Are you sure thee cloudy part at the bottom is undisolved? It looks like wax to me.

I don't think it's wax. As I said, I ground it into granules and some of them seem to have softened but not fully dissolved

Craig Wilson wrote:
Find yourself a magnetic stirrer. Many online are laboratory grade with hot plates, but you can find basic battery or usb powered ones on Amazon for cheap. One of those will dissolve your shellac in an hour or so.

I'll see if those things are available over here. I'd never heard of them.

Pat Foster wrote:
Hi, Dave! Like Jim said, it looks like wax. I'd try another source of flakes that sells a lot of shellac. The majority of SM customers don't do FP shellac (not to disparage SM at all or their customers—myself included), so their stock might not be the freshest. Try someone like shellac.net, whose stock probably moves more quickly. I've had good luck also with VJay's shellac at shellacfinishes.com or woodfinishingenterprises.com

Hi Pat, as I said, it might have been fresh when I got it but that was a long time ago. As I only make one or two instruments a year which don't always involve FP and getting stuff from the US gets more and more expensive, it all gets a bit problematical


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Thu Dec 28, 2023 5:54 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 19, 2013 3:34 pm
Posts: 1097
First name: Bob
Last Name: Russell
State: Michigan USA
Focus: Repair
Status: Semi-pro
I just recently had to buy a new batch of shellac because of (what appears) to be the same problem as you are showing. My shellac was about 5 years old and wouldn't completely dissolved even though I kept it in a dry cool place. The new batch dissolved within a couple of hours.

I would say your shellac is past its prime.

Bob


Top
 Profile  
 
PostPosted: Thu Dec 28, 2023 9:04 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2969
Location: United States
Surely you can get shellac for “French polishing” in France :)
Beautiful bass btw.

_________________
Jim Watts
http://jameswattsguitars.com


Top
 Profile  
 
PostPosted: Thu Dec 28, 2023 9:25 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7380
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
Nice bass!



These users thanked the author meddlingfool for the post: Dave Higham (Fri Dec 29, 2023 6:37 am)
Top
 Profile  
 
PostPosted: Thu Dec 28, 2023 11:18 pm 
Offline
Koa
Koa

Joined: Thu Aug 31, 2006 11:42 pm
Posts: 698
Location: United States
First name: Tom
Last Name: Rein
City: Saline
State: Michigan
Focus: Build
It is not wax. The flakes are dewaxed blonde. What is at the bottom is partially dissolved shellac that's forming a gel. I think the culprit is 10 year old blonde flakes. Lesser refined grades of lac seem to have longer shelf life.

_________________
Stay with the happy people.
--Reynolds Large



These users thanked the author TRein for the post: Dave Higham (Fri Dec 29, 2023 6:36 am)
Top
 Profile  
 
PostPosted: Thu Dec 28, 2023 11:36 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3595
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur
Yep, time to buy some new flakes. You can strain off the gloop and use the rest, but it probably won't get as hard as fresh. I always buy small quantity, 4oz at most. Guitars use so little, even though it's more expensive per pound, you save in in the long run due to less waste. I usually buy from shellac.net or WellerMart.


Top
 Profile  
 
PostPosted: Fri Dec 29, 2023 12:43 am 
Offline
Koa
Koa
User avatar

Joined: Mon Sep 05, 2011 10:45 pm
Posts: 1476
First name: Trevor
Last Name: Gore
City: Sydney
Country: Australia
Focus: Build
Status: Professional
Dave Higham wrote:
....I use the Stewmac flakes and 95° alcohol.....


95° alcohol or 95% alcohol? 95° proof alcohol is only ~47% alcohol, with most of the rest being water.

_________________
Trevor Gore, Luthier. Australian hand made acoustic guitars, classical guitars; custom guitar design and build; guitar design instruction.

http://www.goreguitars.com.au


Top
 Profile  
 
PostPosted: Fri Dec 29, 2023 3:41 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13390
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
"Any polite suggestions as to what I should do with it?"

Hi Dave a couple points from me if I may please.

If you google "how long do shellac flakes" keep what was just returned to me was about 3 years provided that it's kept in the dark in a proper container.

So there is that.

I would be more interested in the alcohol that you are using. We never use denatured alcohol and instead use the 180 - 190 (forgetting the exact proof) proof ever clear sold in some states in the US. It's moonshine and will dissolve anything including marriages.


Top
 Profile  
 
PostPosted: Sat Dec 30, 2023 4:30 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Oct 31, 2011 8:50 pm
Posts: 122
First name: Bob
Last Name: Howell
City: Atlanta
State: Ga
Focus: Build
Status: Amateur
I was told that flakes overheated during shipping are difficult to dissolve. Got a refund. They sat undissolved for a month.


Top
 Profile  
 
PostPosted: Sat Dec 30, 2023 10:21 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Tue Mar 14, 2006 12:41 pm
Posts: 318
Location: Trois-Rivieres
First name: Alain
Last Name: Lambert
City: Trois-Rivieres
State: Quebec
Country: Canada
Focus: Build
Status: Amateur
Trevor Gore wrote:
Dave Higham wrote:
....I use the Stewmac flakes and 95° alcohol.....


95° alcohol or 95% alcohol? 95° proof alcohol is only ~47% alcohol, with most of the rest being water.


I use 24 g in 100 ml for my 2# cut, so your calculation of 24g for 200 ml for a 1# cut is ok.
It does take a few days to fully dissolve with occasional stirring.
I think Trevor is right, you are probably not using 95% alcohol.


Top
 Profile  
 
PostPosted: Sun Dec 31, 2023 5:22 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Nov 19, 2005 10:54 am
Posts: 378
Location: Between Bordeaux and the Atlantic. S.W.France
Thank you for your replies everyone. I think, from what some of you have said (having the same problem) that it must be that the shellac flakes are too old. I bought them so long ago I can't even remember when it was!
I think the alcohol is actually 95% although the bottle is marked 95°. The French have a habit of talking about "wine at 14degrees of alcohol" or "whisky at 40 degrees" when what they mean is %.
I've found a French supplier on line who has 'Super blond dewaxed shellac' and 'Ethyl alcohol at 98%'. They also have isopropyl alcohol at 99.5%. Does anyone use that?
https://www.art-chimie-online.com/gomme ... ciree.html
https://www.art-chimie-online.com/produ ... 2h6o-.html
https://www.art-chimie-online.com/produ ... panol.html


Top
 Profile  
 
PostPosted: Sun Dec 31, 2023 5:38 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5498
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
I use the IPA due to unavailability of Ethyl alcohol in UK, although remember it is a bit more hazardous to health.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.



These users thanked the author Colin North for the post: Dave Higham (Sun Dec 31, 2023 5:53 am)
Top
 Profile  
 
PostPosted: Sun Dec 31, 2023 7:54 am 
Offline
Koa
Koa

Joined: Sat Mar 09, 2019 4:50 pm
Posts: 1259
Location: Goodrich, MI
First name: Ken
Last Name: Nagy
City: Goodrich
State: MI
Focus: Build
Status: Amateur
I use 90% isopropyl because it is easy to find, buy, it works, and it is cheap.

_________________
Why be normal?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 46 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com