Refurbishing a pre-suit era Ibanez Concord.

Board index » Instrument Restoration and Repair

All times are UTC - 5 hours

Refurbishing a pre-suit era Ibanez Concord.

Page 2 of 2

[ 33 posts ]

Go to page Previous 1, 2

Print view

Previous topic | Next topic

Author

Message

Rob2023

Post subject: Re: Refurbishing a pre-suit era Ibanez Concord.

Posted: Sun Sep 24, 2023 11:47 am

Walnut

Joined: Tue Sep 19, 2023 11:43 am
Posts: 11
Focus: Repair
Status: Amateur

I think, it's OK now.

You do not have the required permissions to view the files attached to this post.

Top

Chris Pile

Post subject: Re: Refurbishing a pre-suit era Ibanez Concord.

Posted: Sun Sep 24, 2023 3:18 pm

Contributing Member

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5821
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional

String it up and let's see...

_________________
"Act your age, not your shoe size" - Prince

Top

Smylight

Post subject: Re: Refurbishing a pre-suit era Ibanez Concord.

Posted: Sun Sep 24, 2023 7:41 pm

Cocobolo

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 400
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Professional

Rob2023 wrote:

I think, it's OK now.

I wouldn't think so judging from the pic. Remember that glue will not fill voids so what you see now is what you'll get.

Hesh gets great results with a scraper, but he has a lot of mileage under his belt. Although I too remove the bulk using scraper, I find it easier to finalize fit with sandpaper. FWIW, here's what I do, as many others do as well from what I gather. I stick wide low-tack tape on the top, then on top of it I stick 120 grit sandpaper (same style as what we use for frets, only coarser). Then I simply rub the bridge until it conforms precisely to the top without any wobble or visible gap.

You'll get a perfect fit this way, as well as painful fingers if you do it often enough. At least this old geezer finds it increasingly painful.

;-)

Pierre
Guitares Torvisse

_________________
Pierre Castonguay

Top

Rob2023

Post subject: Re: Refurbishing a pre-suit era Ibanez Concord.

Posted: Mon Sep 25, 2023 1:11 pm

Walnut

Joined: Tue Sep 19, 2023 11:43 am
Posts: 11
Focus: Repair
Status: Amateur

I just wanted to let you know guys that your advice and suggestions
have not fallen on deaf ears and I will make every effort to make the job done properly. [:Y:]

Usually I’m a ‘it’s good enough’ person but in this case I need to change gears.
The bridge has to fit perfectly if I don’t want to watch it loosen again.

See you in few days!

These users thanked the author Rob2023 for the post: Hesh (Mon Sep 25, 2023 11:12 pm)

Top

Tim Mullin

Post subject: Refurbishing a pre-suit era Ibanez Concord.

Posted: Mon Sep 25, 2023 6:26 pm

Koa

Joined: Wed Jan 14, 2009 3:14 am
Posts: 992
Location: Shefford, Québec
First name: Tim
Last Name: Mullin
City: Shefford
State: QC
Zip/Postal Code: J2M 1R5
Country: Canada
Focus: Build
Status: Professional

Smylight wrote:

joshnothing wrote:

Smylight wrote:

[quote="Hesh"]Some decent bolt-ons are the Godin line which includes Seagull, A & L and about four other brands.

Hey Hesh,

As you know I'm in Quebec, home of Godin, so I get to see a whole lot of them in my shop.

Sadly, they decided some years ago to go to a different, industrial process for their neck joints. It is a thick sandwich made of interlocking wood parts held together with a good measure of epoxy. Techs at Godin have advised me that the joint is not serviceable and the neck has to be sawn off and replaced if service is required.

I was also told that because the joint is SO strong, no reset should ever be needed. Talk about wishful thinking…

I have once tried dismantling one and it was a right nightmare; once the extension gets loose (after having fought the epoxy), the interlocked wood pieces inside still make sure you won't ever get the thing undone. Now I tell my poor customers that their Godin-made guitar is not serviceable when (not if) it finally needs a reset. But I will gladly welcome any hint from fellows who have discovered a way to save those guitars… short of sawing the neck off. ;-)

Pierre
Guitares Torvisse

Pierre, thanks for this information. Do you know what year approximately this change was made?

Sent from my iPhone using Tapatalk

From what the tech guys at Godin tell me, post-2006 cannot be reset without sawing them off. I do see lots of those in need of a reset, sadly.

Pierre
Guitares Torvisse[/quote]

Pierre is exactly right about the change to the Godin neck joint. I’ve seen them new from the music store needing a reset. The Godin tech I talked to (while calling about another Godin failure) was part of the R&D team that “designed” the joint with epoxy. He was quite proud of eliminating the need for a reset. Yeah, right.

BTW, the only indication that the instrument has the “improved” neck joint is the serial number — they otherwise look identical. Depending on the exact model, the changeover coincided almost exactly with the switch from 8-digit to 12-digit serial numbers.

Sent from my iPad using Tapatalk

These users thanked the author Tim Mullin for the post (total 2): Hesh (Mon Sep 25, 2023 11:12 pm) • Smylight (Mon Sep 25, 2023 7:23 pm)

Top

Hesh

Post subject: Re: Refurbishing a pre-suit era Ibanez Concord.

Posted: Mon Sep 25, 2023 11:13 pm

Old Growth Brazilian Rosewood

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional

Rob2023 wrote:

I just wanted to let you know guys that your advice and suggestions
have not fallen on deaf ears and I will make every effort to make the job done properly. [:Y:]

Usually I’m a ‘it’s good enough’ person but in this case I need to change gears.
The bridge has to fit perfectly if I don’t want to watch it loosen again.

See you in few days!

You're doing fine my friend we are all here to learn and we are happy to help when we can. [:Y:]

Top

Rob2023

Post subject: Re: Refurbishing a pre-suit era Ibanez Concord.

Posted: Wed Sep 27, 2023 12:03 pm

Walnut

Joined: Tue Sep 19, 2023 11:43 am
Posts: 11
Focus: Repair
Status: Amateur

Hi Guys!

So I’m done with the sanding.
The bridge fits the top of the guitar really tight now.
It’s not glued yet but I will do it tomorrow.

I had to sand the top in the area of the bridge as well
to make it more smooth and even.
As the result of it you can see now the wonderful texture of Madagascar Acacia ... muhahaha! laughing6-hehe

See you!

You do not have the required permissions to view the files attached to this post.

Top

Hesh

Post subject: Re: Refurbishing a pre-suit era Ibanez Concord.

Posted: Fri Sep 29, 2023 12:35 am

Old Growth Brazilian Rosewood

I dunno it may be an optical illusion but that bridge sure continues to look crooked to me. The saddle slot is engineered to be crooked and further back on the bass side but the leading edge of the bridge should be 90 degrees to the centerline of the neck.

Top

Page 2 of 2

[ 33 posts ]

Go to page Previous 1, 2

Board index » Instrument Restoration and Repair

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 34 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:

Official Luthiers Forum!

Refurbishing a pre-suit era Ibanez Concord.

Who is online