Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Cumaru (Ipe, teak,etc)

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

Mike OMelia

Post subject: Cumaru (Ipe, teak,etc)

Posted: Sat Apr 22, 2023 9:17 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

I have an opportunity to purchase some old growth Cumaru. I've heard its oily, hard to glue. Anybody build guitars with this?

Mike

Top

Mike OMelia

Post subject: Re: Cumaru (Ipe, teak,etc)

Posted: Mon Apr 24, 2023 3:45 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

So, no?

Top

Mike OMelia

Post subject: Re: Cumaru (Ipe, teak,etc)

Posted: Mon Apr 24, 2023 3:47 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

If it’s not a workable tonewood, understood. It sure as heck would be good for fingerboards, peghead head plates, bridges, etc. it’s pretty dense.

Top

jfmckenna

Post subject: Re: Cumaru (Ipe, teak,etc)

Posted: Mon Apr 24, 2023 3:55 pm

Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia

I have never used it before Mike, my guess is many have not for guitars. But woods like Cocobolo are oily too and there are methods to glue them properly, sand the surface fresh, wipe with acetone etc... But IDK about this one.

Top

Clay S.

Post subject: Re: Cumaru (Ipe, teak,etc)

Posted: Mon Apr 24, 2023 6:09 pm

Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968

interlocked grain, high silica content, hard to glue, blunts edge tools, what's not to love? bliss

https://www.wood-database.com/cumaru/
Many woods that were not considered to be "tonewoods", now are. It might be the next trendy thing if the right people talk it up. The sample on the wood data base looked pretty plain, but if you can find a piece with swirly curly grain and market it as Brazilian teak it might do fine.

Top

dofthesea

Post subject: Re: Cumaru (Ipe, teak,etc)

Posted: Mon Apr 24, 2023 7:45 pm

Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 785
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur

I haven't built a guitar with it. But I prob never will. I have installed about 10,000 sq ft of this over the years as I'm a General Contractor. It does nothing but burn thru blades, you also need a serious table saw to cut it with. And it's so oily it's the least resistant fire, real wood out there. It's only good for making exterior furniture.

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/

Top

Page 1 of 1

[ 6 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: meddlingfool, stumblin and 54 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: