Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Nov 24, 2024 6:27 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 30 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Cutting Nut Slots
PostPosted: Sat Sep 03, 2022 8:47 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
doncaparker wrote:
Oh, great. Once you start calling it a pecker, Hesh won’t be able to use it without giggling. :lol:


I'm more worried about letting the world know after I measure the one at work tomorrow that my pecker is on .007" thick.... :)


Top
 Profile  
 
 Post subject: Re: Cutting Nut Slots
PostPosted: Sat Sep 03, 2022 8:57 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
bcombs510 wrote:
I have a question , Hesh. In the pics at the top I see you’re using this tool with the strings off. In the pic of the underside it appears to be a thin edge. I presume this is because you may need to use it with strings on. Is that right?

When I use other tools like this, for example the relief gauge from SM, it’s easy to change the reading when leaning the tool side to side.

I guess if I never planned to use it with strings on I could make the surface wider to avoid being able to tilt L/R.


Sent from my iPhone using Tapatalk Pro


Good observation Brad.

Yes it is designed to be used if we want with strings on and the string lifted out of the slot and set to one side. I don't use it that way but we can show a client in real time that his sitar sound is a precision measured low nut slot.

And yes again the tool changes values since we are measuring near nothing the measurement is so fine when you rock it but it's lowest value is always then it is straight up or down.

Making one that dos not have the narrower base to fit between strings would reduce or eliminate rocking but as someone who uses the tool for every Floyd Rose I have to set-up (I hate them....) which is several times a week (sadly) (we charge more for them too because Hesh hates them...) the rocking is never an issue for me.

What is worse in my experience is when setting intonation and watching the swings from how much fretting pressure I apply with my finger. I can change the reading far more cents than the threshold of human hearing. As such both my right hand and my fretting hand are simulating the average player with a moderate attack unless I know more about them. I used to ask them to play for me but now I am not there when the germ infested covid carriers come in during the day. 91 year old blind Mom we are tying to keep alive here ya know.

It is not easy to set-up an instrument well for a generic player you have to set a bit higher knowing they may be a heavy hitter.

Good catch Brad are you going to make one?



These users thanked the author Hesh for the post: bcombs510 (Sat Sep 03, 2022 12:29 pm)
Top
 Profile  
 
 Post subject: Re: Cutting Nut Slots
PostPosted: Sat Sep 03, 2022 10:00 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
Awesome looking tool there for sure.



These users thanked the author jfmckenna for the post: Hesh (Sat Sep 03, 2022 1:02 pm)
Top
 Profile  
 
 Post subject: Re: Cutting Nut Slots
PostPosted: Sat Sep 03, 2022 12:04 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Dec 17, 2013 10:52 pm
Posts: 3071
First name: Don
Last Name: Parker
City: Charleston
State: West Virginia
Zip/Postal Code: 25314
Country: USA
Focus: Build
Status: Amateur
Hesh wrote:
doncaparker wrote:
Oh, great. Once you start calling it a pecker, Hesh won’t be able to use it without giggling. :lol:


I'm more worried about letting the world know after I measure the one at work tomorrow that my pecker is on .007" thick.... :)


As with any tool, it's what you do with it that matters. :D



These users thanked the author doncaparker for the post: Hesh (Sat Sep 03, 2022 1:03 pm)
Top
 Profile  
 
 Post subject: Re: Cutting Nut Slots
PostPosted: Sat Sep 03, 2022 12:35 pm 
Online
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3601
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Hesh wrote:
Good catch Brad are you going to make one?


I feel that I must. :D

I use the SM nut slotting gauge which, as I’m sure you know, shows the string height over the first to give a reference number of how low the slot is. What I like about this approach is doing it without being strung up.

Thanks for sharing it and watch out for your pecker.


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars



These users thanked the author bcombs510 for the post: Hesh (Sat Sep 03, 2022 1:03 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 30 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours


Who is online

Users browsing this forum: Tim McKnight and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com