***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Jul 23, 2025 9:09 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
Bill Higgs
PostPosted: Thu Jul 28, 2022 5:53 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon May 26, 2008 2:31 pm
Posts: 259
Location: Conway, Arkansas
I tried putting another .005” clear scratch guard on one of my instruments today and ran into a new problem. Placed the scratch guard with the help of some soapy water and squeegeed all the bubbles out, no problem. But then after drying everything off and looking at the guard it has a very uneven bumpy appearance to it that I have never experienced in my past builds. The last pictures show the scratch guard that I placed today and the first pictures show an older instrument with a clear scratch guard that looks just fine and always did. These are cut from StewMac clear scratch guard sheets.
Any clues as to what might be going on? (The surface of the instrument underneath the scratch guard was glass smooth.)


You do not have the required permissions to view the files attached to this post.

_________________
Formerly know as Mandodiddle.
Top
 Profile  
 
Jim Watts
PostPosted: Thu Jul 28, 2022 10:43 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2997
Location: United States
There might be a minute amount of water still under there. Give it a day or two and see if it doesn't improve.

_________________
Jim Watts
http://jameswattsguitars.com
Top
 Profile  
 
Pat Foster
PostPosted: Thu Jul 28, 2022 11:30 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat May 17, 2008 1:11 pm
Posts: 2390
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build
Waiting a few days like Jim suggested has done the trick for me.

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com
Top
 Profile  
 
kjaffrey
PostPosted: Fri Jul 29, 2022 6:41 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Feb 02, 2008 9:19 am
Posts: 184
Focus: Build
Status: Amateur
If memory serves I had the same problem when using the thinner .005” material so I went back to the thicker .010” which I normally used and it was fine.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 26 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com