Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

pearloid cutting tools

Page 1 of 1

[ 5 posts ]

Print view

Previous topic | Next topic

Author

Message

mikemcnerney

Post subject: pearloid cutting tools

Posted: Mon Nov 22, 2021 5:52 pm

Koa

Joined: Tue Jul 22, 2008 9:34 pm
Posts: 514
Location: ottawa, ontario, ca
First name: Mike
Last Name: McNerney
City: Ottawa
State: On
Country: Ca
Focus: Build
Status: Amateur

I am using some incudo pearloid celluloid laminate acrylic sheet I purchased from Rothko and frost for the headplate, pickgaurd and bindings.
I need to know what tools I can use to cut this material. For the HP and PG I would like to use my bandsaw with a 6tpi blade, is that too course?
If so I would consider buying a finer blade. The HP is all straight lines. It would also be nice to use the tablesaw. I am considering a fine diablo blade 7" x 24t or my fret saw blade, 6" x ~100t. I tried sanding it on the belt sand and that works well/ I'll be cutting the binding with a fine back saw in a mitre box. On another subject I want to buy some carbon fibre .125 x .325ish In CANADA and have yet to find anyone.

_________________
Mike McNerney

Top

meddlingfool

Post subject: Re: pearloid cutting tools

Posted: Mon Nov 22, 2021 5:55 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7380
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional

Check with Yusuke at Japarts for the CF...

Top

bftobin

Post subject: Re: pearloid cutting tools

Posted: Mon Nov 22, 2021 6:42 pm

Cocobolo

Joined: Fri Nov 02, 2007 2:53 pm
Posts: 481
Location: Canada

Mike, have you tried NextGen ?

Top

mikemcnerney

Post subject: Re: pearloid cutting tools

Posted: Mon Nov 22, 2021 6:59 pm

Koa

next gen has .25 x .375. I've always used .125. Is there room for something that thick?

_________________
Mike McNerney

Top

bluescreek

Post subject: Re: pearloid cutting tools

Posted: Tue Nov 23, 2021 9:48 am

Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4905
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional

if you use the band saw be sure to use a zero clearance , like a piece of plywood allow a little and sand to final shape it isn't that difficult

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it

Top

Page 1 of 1

[ 5 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: doncaparker and 39 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: