Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Vinyl Sealer

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

Mike OMelia

Post subject: Vinyl Sealer

Posted: Sat Feb 15, 2020 12:48 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

Is it ok to spray vinyl sealer over epoxy pore fill? I use a final wash coat of epoxy when finished with pores. Finish will be nitro.

Mike

Top

Clay S.

Post subject: Re: Vinyl Sealer

Posted: Sat Feb 15, 2020 1:42 pm

Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968

I usually spray nitro directly on top of epoxy. Vinyl sealer doesn't adhere as well as nitro does to most things and has less clarity so I don't use it, but as long as the epoxy has cured (week?) it should be O.K.

Top

Mike OMelia

Post subject: Re: Vinyl Sealer

Posted: Sat Feb 15, 2020 1:46 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

How about the top ?

Top

Clay S.

Post subject: Re: Vinyl Sealer

Posted: Sat Feb 15, 2020 3:04 pm

Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968

Hi Mike,
I self seal the top with nitro. It is close grained and doesn't need any pore filling and I don't use epoxy on it (sometimes epoxy fill the rosette if it is porous material)

Top

B. Howard

Post subject: Re: Vinyl Sealer

Posted: Sat Feb 15, 2020 3:31 pm

Brazilian Rosewood

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional

While you do not need the sealer it won't hurt. I would use the recommended sealer for the finish from the same manufacturer.

**edited**

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/

Last edited by B. Howard on Sun Feb 16, 2020 9:00 am, edited 1 time in total.

Top

Mike OMelia

Post subject: Re: Vinyl Sealer

Posted: Sat Feb 15, 2020 4:09 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

Its Mohawk (Behlen) sealer, for the Mohawk nitro. Think I'll just spray the top. Brian, did you mean "while u don't need" ?

These users thanked the author Mike OMelia for the post: B. Howard (Sun Feb 16, 2020 9:00 am)

Top

Joe Beaver

Post subject: Re: Vinyl Sealer

Posted: Sun Feb 16, 2020 1:45 am

Contributing Member

Joined: Thu Feb 09, 2006 2:35 pm
Posts: 2951
Location: United States
First name: Joe
Last Name: Beaver
City: Lake Forest
State: California
Focus: Build

I have never used Mohawk nitro, I use the Cardinal LuthierLac stuff and their vinyl sealer. I always try to use finish and undercoat from the same manufacture as you have done.

The only thing I can add is with Cardinal, it bonds much better if you spray the sealer (over cured epoxy or bare wood) and then follow up in 30-60 minutes with the first top coat. I suppose my point is it is best to follow the manufacturer recommendations.

_________________
Joe Beaver
Maker of Sawdust

Top

klooker

Post subject: Re: Vinyl Sealer

Posted: Sun Feb 16, 2020 9:39 am

Contributing Member

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur

I’ve done it without any issues over Z Poxy & over West Systems 105/207

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.

Top

Freeman

Post subject: Re: Vinyl Sealer

Posted: Sun Feb 16, 2020 12:13 pm

Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2150
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur

I also spray it over Zpoxy with no problems

Top

Page 1 of 1

[ 9 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: stumblin and 65 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: