***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Nov 29, 2024 6:53 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 2 of 2
  [ 31 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
Woodie G
PostPosted: Wed Jul 03, 2019 2:23 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1876
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
For clearing small portions of the slot of CA, we use Mr. Breakstone's recommended StewMac hook tool and for wholesale slot clearing (where the luthier fretted with CA), a high wattage soldering iron with a 0.020" piece of scrap sawblade held in to a slot in the tip with a screw...good fume extraction is a must. A router speed controller does a good job of setting tip heat hot enough to melt the CA, but cool enough to avoid wood smoke.

Some fine points re: the hook tool:

- Resharpen the blade with a slip stone or fine half-round file...once dull, it takes a lot more force to cut the CA residue...proper function is a 'press-crunch'/repeat action. A fine Dremel sanding drum can be used as well, but use care to avoid heating the tip, as well as the direction of rotation due to safety concerns

- Do not use the binding as a fulcrum to lever out the last bit of CA...that will pop the binding loose with related finish damage (and turn air in shop blue )

- Take small bites, working from the center of the slot outward to the binding

_________________
For the times they are a changin'

- Bob Dylan


Last edited by Woodie G on Thu Jul 04, 2019 5:25 am, edited 2 times in total.

These users thanked the author Woodie G for the post: Mike Baker (Wed Jul 03, 2019 2:57 pm)
Top
 Profile  
 
Hesh
PostPosted: Wed Jul 03, 2019 2:32 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13388
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
meddlingfool wrote:
I wouldn't know, I'm non huffer:)


I was going to reply but I can't remember what I wanted to say....:)
Top
 Profile  
 
Hesh
PostPosted: Wed Jul 03, 2019 2:34 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13388
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Woodie G wrote:
For clearing small portions of the slot of CA, we use Mr. Breakstone's recommended StewMac hook tool and for wholesale slot clearing (where the luthier fretted with CA), a high wattage soldering iron with a 0.020" piece of scrap sawblade held in to a slot in the tip with a screw...good fume extraction is a must. A router peed controller does a good job of setting tip heat hot enough to melt the CA, but cool enough to avoid wood smoke.

Some fine points re: the hook tool:

- Resharpen the blade with a slip stone or fine half-round file...once dull, it takes a lot more force to cut the CA residue...proper function is a 'press-crunch'/repeat action. A fine Dremel sanding drum can be used as well, but use care to avoid heating the tip, as well as the direction of rotation due to safety concerns

- Do not use the binding as a fulcrum to level out the last bit of CA...that will pop the binding loose with related finish damage

- Take small bites, working from the center of the slot outward to the binding


Great stuff Woodie!
Top
 Profile  
 
Mike Baker
PostPosted: Thu Jul 04, 2019 5:14 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
Success! I used an exacto knife I had, and followed all the cautions given here. Went smoothly.
My thanks to everyone. Much appreciated.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


These users thanked the author Mike Baker for the post: Hesh (Thu Jul 04, 2019 5:29 pm)
Top
 Profile  
 
Tim Mullin
PostPosted: Fri Jul 05, 2019 7:29 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 14, 2009 3:14 am
Posts: 992
Location: Shefford, Québec
First name: Tim
Last Name: Mullin
City: Shefford
State: QC
Zip/Postal Code: J2M 1R5
Country: Canada
Focus: Build
Status: Professional
Congrats! No doubt it took enough time that you’ve sworn never to get that much CA into a slot ever again. But you know what? It may happen anyway — I know I’ve been faced with slot cleanout after binding more than once, and the latest was just two weeks ago. Felt pretty stupid, but there ya go!


Sent from my iPhone using Tapatalk


These users thanked the author Tim Mullin for the post: Mike Baker (Fri Jul 05, 2019 7:51 pm)
Top
 Profile  
 
Mike Baker
PostPosted: Fri Jul 05, 2019 7:53 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
Yeah, wasn't a picnic for sure.
And yep, I shall endeavor not to do that again, lol.
But, I'm pretty sure it will happen again. At least I have the solution.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 31 posts ]  Go to page Previous  1, 2

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: TimAllen and 68 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com