***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 30, 2024 7:42 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 20 posts ] 
  Print view Previous topic | Next topic 
Author Message
SnowManSnow
PostPosted: Fri Nov 09, 2018 10:52 am 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
There is a .25 extra length on this LmI FB. Is this an accident or did they actually consider that a lot of builders use a .25 nut and left this to help w spacing?
If it’s there on purpose then bravo limo. Bravo

Image


Sent from my iPhone using Tapatalk Pro
Top
 Profile  
 
Pmaj7
PostPosted: Fri Nov 09, 2018 10:55 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2257
Location: Seattle WA
Focus: Build
Status: Semi-pro
Which side is it on? I would imagine it would be on the sound hole side so that you could end the fretboard wherever you want it. I can't imagine why it would be on the nut side, unless it was for a fender Style electric guitar Maybe?

New username, same ole Pat Macaluso!

_________________
Pat
Top
 Profile  
 
Michaeldc
PostPosted: Fri Nov 09, 2018 10:57 am 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1484
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
or you could install a zero fret.
Top
 Profile  
 
SnowManSnow
PostPosted: Fri Nov 09, 2018 11:11 am 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
Pmaj7 wrote:
Which side is it on? I would imagine it would be on the sound hole side so that you could end the fretboard wherever you want it. I can't imagine why it would be on the nut side, unless it was for a fender Style electric guitar Maybe?

New username, same ole Pat Macaluso!

It’s on the nut side


Sent from my iPhone using Tapatalk Pro
Top
 Profile  
 
Haans
PostPosted: Fri Nov 09, 2018 11:28 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Cut it off...
Top
 Profile  
 
klooker
PostPosted: Fri Nov 09, 2018 11:36 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
Whenever I slot my own using a jig, you always end up with that piece past the nut. Cutting it off is another step. I suspect they're just saving time.

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.
Top
 Profile  
 
SnowManSnow
PostPosted: Fri Nov 09, 2018 11:36 am 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
Haans wrote:
Cut it off...

I plan to ... just wondered if it was there for a specific purpose


Sent from my iPhone using Tapatalk Pro
Top
 Profile  
 
johnparchem
PostPosted: Fri Nov 09, 2018 12:03 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1703
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
As mentioned by Michael you can install a zero fret although I believe by default LMI does not slot it as a zero fret rather they cut the slot a tad long (half the kerf) to put the nut at the zero location. Personally I would rather it be cut as a zero slot and get the half of kerf as a touch of nut compensation.

_________________
http://www.Harvestmoonguitars.com
Top
 Profile  
 
Haans
PostPosted: Fri Nov 09, 2018 12:06 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
How would you know where zero was if they didn't put it there...
Top
 Profile  
 
DannyV
PostPosted: Fri Nov 09, 2018 1:06 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Dec 30, 2006 3:20 am
Posts: 2593
Location: Powell River BC Canada
First name: Danny
Last Name: Vincent
If you do cut it off, whatever you do, DO NOT THROW AWAY THE OFFCUT!

I personally like to take an extra 1 mm off that end and decrease the compensation by the same.
Top
 Profile  
 
Hans Mattes
PostPosted: Fri Nov 09, 2018 1:33 pm 
Offline
Cocobolo
Cocobolo

Joined: Thu Jul 28, 2016 12:35 pm
Posts: 124
First name: Hans
Last Name: Mattes
City: Petaluma
State: CA
Zip/Postal Code: 94952
Country: United States
Focus: Build
Status: Amateur
LMI will slot fingerboards with ⅛", ¼", ⅜", or ½" left behind the first cut. And they will position the first cut for a nut or for a zero fret. Your call.

As an aside, I always use a zero fret (and a bolt-on neck). I'm too old to play "macho." Why make life harder?
Top
 Profile  
 
meddlingfool
PostPosted: Fri Nov 09, 2018 1:37 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7380
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
I think it's just an artifact from how they produce it, and that it does not serve a purpose.
Top
 Profile  
 
LarryH
PostPosted: Sat Nov 10, 2018 5:54 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Jan 03, 2006 1:47 pm
Posts: 1624
Location: United States
First name: Larry
Last Name: Hawes
Focus: Build
Status: Amateur
https://www.lmii.com/pre-slotted-pre-ra ... frets.html

PRODUCT DESCRIPTION
The boards are CNC slotted with a nut slot offset to correct for fret saw blade kerf for compensation purposes so that the bridge edge of the slot is at true zero. This method of slotting works well for most builders. To bring the breakaway point of the nut slot closer to the bridge, it is easy to file away the amount of material desired. This method will not allow a zero fret.

_________________
Thank You and Best To All
Top
 Profile  
 
Haans
PostPosted: Sat Nov 10, 2018 6:08 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Every rule has a zero start but they are alum or steel, most plastic "kiddie" rulers have a zero mark and are longer than the zero start AND, you Never, Ever start at the end of a board in case of cracking. Just saw it off or cut your zero fret to whatever you want if that is what you use. Personally I only tried it once and found it interfered with refretting unless you like to pull it and re-install all the time.
Top
 Profile  
 
johnparchem
PostPosted: Sat Nov 10, 2018 6:37 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1703
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
LarryH wrote:
https://www.lmii.com/pre-slotted-pre-radiused-fingerboards/7618-indian-rosewood-fingerboard-1st-grade-24562-scale-12-radius-22-frets.html

PRODUCT DESCRIPTION
The boards are CNC slotted with a nut slot offset to correct for fret saw blade kerf for compensation purposes so that the bridge edge of the slot is at true zero. This method of slotting works well for most builders. To bring the breakaway point of the nut slot closer to the bridge, it is easy to file away the amount of material desired. This method will not allow a zero fret.


You can buy a blank and hit the customize button and get it pre slotted almost anyway you want. They are usually very quick to customize and ship. They have a zero fret option.

_________________
http://www.Harvestmoonguitars.com
Top
 Profile  
 
Joe Beaver
PostPosted: Sat Nov 10, 2018 7:02 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Feb 09, 2006 2:35 pm
Posts: 2951
Location: United States
First name: Joe
Last Name: Beaver
City: Lake Forest
State: California
Focus: Build
DannyV wrote:
If you do cut it off, whatever you do, DO NOT THROW AWAY THE OFFCUT!

Not sure why not Danny. I usually keep the soundhole cutoff but not the nut. As usual I could be missing an opportunity.

_________________
Joe Beaver
Maker of Sawdust
Top
 Profile  
 
dofthesea
PostPosted: Sun Nov 11, 2018 11:00 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 789
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
I always save the offcuts until the guitar is finished. You just never know.

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/
Top
 Profile  
 
Tim L
PostPosted: Sun Nov 11, 2018 2:21 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Jan 29, 2008 11:14 am
Posts: 819
First name: Tim
Last Name: Lynch
City: Santa Cruz
Zip/Postal Code: 95060
Country: United States
Focus: Build
Status: Amateur
LMI leaves material on both ends of the serviced fingerboards, or at least they used to. I drill holes on the centerline at each end and use them to register the fingerboard in fixtures that I made. I still do that even though I am making my own fingerboards now. When finished I just cut it off making sure there is not a step.
Top
 Profile  
 
DannyV
PostPosted: Sun Nov 11, 2018 9:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Dec 30, 2006 3:20 am
Posts: 2593
Location: Powell River BC Canada
First name: Danny
Last Name: Vincent
Joe Beaver wrote:
DannyV wrote:
If you do cut it off, whatever you do, DO NOT THROW AWAY THE OFFCUT!

Not sure why not Danny. I usually keep the soundhole cutoff but not the nut. As usual I could be missing an opportunity.

Because one day you will end up with a bag full big enough for a worthy fire, Joe. Oh course I'm kidding, but we must all have a big bag or box of exotic offcuts, to precious to throw out. The odd one does come in handy.
Top
 Profile  
 
Joe Beaver
PostPosted: Tue Nov 13, 2018 4:45 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Feb 09, 2006 2:35 pm
Posts: 2951
Location: United States
First name: Joe
Last Name: Beaver
City: Lake Forest
State: California
Focus: Build
Danny,
Now it is becoming clear to me.

Who would toss exotic wood? Not me, not now.....

_________________
Joe Beaver
Maker of Sawdust
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 20 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: Cal Maier, Juergen and 65 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com