Official Luthiers Forum! • View topic

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours

Veneering pick guards

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

Freeman

Post subject: Veneering pick guards

Posted: Thu May 17, 2018 1:42 pm

Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2164
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur

I just veneered two headstocks for a customer and there is a lot of veneer left over. We've decided to apply it to pick guards so they will match. I have lots of black plastic p/g material, my idea was to cut out the guards, glue the veneer on as I did on the heads and shoot a few coats of lacquer. Question is, what kind of adhesive would be best here (I used Titebond on the heads)? (And I'll make myself a note to be sure to remove the film before I do it). Veneer is 0.020, I don't have any sort of vacuum so I'll probably be clamping between something flat - maybe 3/4 MFD

Top

Bryan Bear

Post subject: Re: Veneering pick guards

Posted: Thu May 17, 2018 2:40 pm

Brazilian Rosewood

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3301
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur

Do you have enough veneer to lay up a few layers with epoxy and make the pick guards from that?

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.

Top

Chris Pile

Post subject: Re: Veneering pick guards

Posted: Thu May 17, 2018 4:42 pm

Contributing Member

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5864
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional

Titebond always worked for me doing veneer applications.

_________________
"Act your age, not your shoe size" - Prince

Top

sdsollod

Post subject: Re: Veneering pick guards

Posted: Thu May 17, 2018 6:55 pm

Koa

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur

Does titebond adhere to plastic? What about contact cement? I'll be interested with what you decide to use. ...and how it worked.

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com

Top

sdsollod

Post subject: Re: Veneering pick guards

Posted: Thu May 17, 2018 7:00 pm

Koa

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur

How about Duco or Stew mac Bind-all? Works for plastic binding...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com

Top

B. Howard

Post subject: Re: Veneering pick guards

Posted: Fri May 18, 2018 6:06 am

Brazilian Rosewood

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional

I would go with a contact cement like used for P-Lam counter tops.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/

These users thanked the author B. Howard for the post: Durero (Fri May 18, 2018 2:37 pm)

Top

dzsmith

Post subject: Re: Veneering pick guards

Posted: Fri May 18, 2018 10:21 am

Contributing Member

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
First name: D
Last Name: S
State: TX
Country: USA
Focus: Build
Status: Amateur

I’ve used Bryan’s suggestion with good results.
3-5 layers of veneer glued with veneer glue.
The finished piece is durable, machinable, and somewhat flexible.

_________________
wah
Wah-wah-wah-wah
Wah

Top

Page 1 of 1

[ 7 posts ]

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: