***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Dec 02, 2024 5:36 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 2 of 2
  [ 36 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
Clay S.
PostPosted: Sat Mar 24, 2018 8:58 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968
If you can remove the fingerboard you could continue the decorative veneer theme under it to bring the fingerboard up above the peghead overlay.
Top
 Profile  
 
jfmckenna
PostPosted: Sat Mar 24, 2018 9:25 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
J De Rocher wrote:
Colin North wrote:
So where does the nut go?


I'm wondering about this too. How do you make the slot for the nut?


I always butt the head plate veneer with the fretboard even on up to finishing. Then I use a razor saw and chisel to cut out the slot for the nut.


These users thanked the author jfmckenna for the post: J De Rocher (Sun Mar 25, 2018 2:15 pm)
Top
 Profile  
 
sdsollod
PostPosted: Sun Mar 25, 2018 10:13 am 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
To me, the fix ends up looking pretty good...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com
Top
 Profile  
 
kjaffrey
PostPosted: Sun Mar 25, 2018 11:06 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Feb 02, 2008 9:19 am
Posts: 184
Focus: Build
Status: Amateur
I like the way the slots look with the contrasting veneer. As opposed to some othe mistakes turned into "features" this one looks intentional. [clap]

Kent
Top
 Profile  
 
Clay S.
PostPosted: Sun Mar 25, 2018 12:28 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968
My question is; with the peghead veneer above the fingerboard are you going to have the vertical space needed to slot the nut to keep the strings close to the frets at the nut end and still have the strings clear the peghead veneer. That was why I commented about possibly putting a veneer under the fingerboard to raise it above the peghead veneer.
But pictures can be deceiving - maybe I'm not seeing it right.
Top
 Profile  
 
jfmckenna
PostPosted: Sun Mar 25, 2018 1:03 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
Clay S. wrote:
My question is; with the peghead veneer above the fingerboard are you going to have the vertical space needed to slot the nut to keep the strings close to the frets at the nut end and still have the strings clear the peghead veneer. That was why I commented about possibly putting a veneer under the fingerboard to raise it above the peghead veneer.
But pictures can be deceiving - maybe I'm not seeing it right.


Just barely, but yes.


These users thanked the author jfmckenna for the post: Clay S. (Sun Mar 25, 2018 1:56 pm)
Top
 Profile  
 
Ken Lewis
PostPosted: Sun May 13, 2018 10:35 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Aug 27, 2011 1:59 pm
Posts: 379
First name: Ken
Last Name: Lewis
City: Mt. Pearl
State: NL
Country: Canada
Focus: Build
Status: Amateur
GET OUT!!!
Top
 Profile  
 
Alex Kleon
PostPosted: Sun May 13, 2018 10:52 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Frank, you listed Louboutin Shoes three times. You're fired!

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker
Top
 Profile  
 
johnparchem
PostPosted: Sun May 13, 2018 11:29 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1703
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
All of my backstraps came about from a mess up somewhere usually just automatic mode planing to the wrong tuning machine thickness. Now that I see your reverse slope on the slots, it seems like an obvious feature, that I obviously never thought of. Lucky me I am laying out 8 string slotted head stock today.

_________________
http://www.Harvestmoonguitars.com
Top
 Profile  
 
Ken Lewis
PostPosted: Sun May 13, 2018 12:47 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Aug 27, 2011 1:59 pm
Posts: 379
First name: Ken
Last Name: Lewis
City: Mt. Pearl
State: NL
Country: Canada
Focus: Build
Status: Amateur
John, I guess you can thank Frank for that, then:)
Top
 Profile  
 
jfmckenna
PostPosted: Sun May 13, 2018 7:29 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
I guess since this came back up I may as well stay on topic and post a pic :D

Image


These users thanked the author jfmckenna for the post: bcombs510 (Sun May 13, 2018 8:06 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 36 posts ]  Go to page Previous  1, 2

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 84 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com