Official Luthiers Forum!

Thought I'd share some pics of my latest. This is the second OM I've done in what I've taken to calling my "Bauhaus" style. It's red spruce over EI rosewood, with a walnut neck. The fingerboard and bridge are ebony; bindings are sweet gum, or Liquidamber styraciflua, to be precise. The finish is Tru-Oil.

I made this one for an old buddy of mine who's a carpenter. He wanted a guitar and I needed a fence for our new dog. Done and done! Notice anything odd? Yup, he's a lefty. Weird trying to set up a guitar you can't play.

George :-)

Your accent woods have a wonderful flow, George, and your rosette has a perfect balance!
Very lovely guitar!

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker

Wow! Doing some kind of sorcery there with the Tru-oil. Impressive. I also really enjoy your headplate designs. Very unique. It’s a truss rod cover in the middle of the plate? Is it inset into the nut or sanded to match the shape of the back of the nut? Looks cool!


Sent from my iPhone using Tapatalk

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars

Nice!

Really very nice! I love the headplate, position markers, and rosette. The truoil finish is quite nice. Did you buff? What was your process? Also, your tuners seem a little farther in than usual. How far from the end of headstock are they? Beautiful work. I hope you're happy with your fence...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com

The walnut neck looks great against the EIRW. Lovely design

Ed

Wow!

Sweet!

_________________
Pat

Thanks for the kind comments. In response to the questions:

- The truss rod cover is just sanded to mate with the nut at the headstock angle, same as the headplate.
- I do not have a buffing arbor, so that final step has always been tricky for me. Over the years I've tried a variety of different "varnishes" and an equally wide array of hand or hand-drill buffing processes. The last three guitars I've taken to simply wiping Tru-Oil on and then off with a blue paper shop towel. I do that until I have a decent build-up, then flat sand, and add another two or three coats. Done. So far this is the best finishing method I have devised for my indoor space. Does it shine like a super-glossy polished lacquer or polyester finish? Nope. But I'm getting close and it has a warmth and feel to it that I think are beautiful.
- I'm still tweaking this headstock shape. My goal is to find a pleasing shape (to my eye) that incorporates straight string pull paths. Last time I left a bend in the strings and this time I ended up with the posts a little too far in from the edges. Next time, hopefully, it will be just right.

Thanks again!

_________________
George :-)

Completely agree, absolutely beautiful guitar!

I bet he built the fence faster than you built the guitar?
But if you are both happy, it is a sweet exchange.
Lovely instrument. Like you, I am a fan of a hand applied oil finish. Who wants to make something that looks like it came from a factory? Lovely job!

Ya done good, George. I like it.

_________________
"Act your age, not your shoe size" - Prince

Well executed--visually fun to look at from all angles! I'm a fan of red spruce tops, too--enjoy the unique appearance of each top and the sound they produce. Hope your new dog appreciates all the work!

Nice one George!
I find that old cotton t-shirts work better than the blue shop towels, especially for the final coats.
20-30 coats of tru oil and thinning ~20% on the last few coats gives me a pretty good gloss.

B

_________________
My memory is so good, sometimes I remember things that never happened.

I'm seriously considering using Tru Oil on my current project. It seems like it gets called out as the 'amateurs' finish in an almost derogatory nature but every freakin single guitar I see with a Tru Oil finish looks fantastic to me. Of course any finish requires skill.

Nice job all round, I'm sure your carpenter buddy will be thrilled.

Perhaps one last question about Tru-Oil... Well, maybe its two... Did you pore fill the rosewood? ...and did you put anything under the spruce top, like shellac? I thought Tru-Oil directly on spruce was problematic...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com

Beautiful work !!

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/

George, the guitar looks great. Nice design on the headstock and fretboard inlays.

_________________
http://www.Harvestmoonguitars.com

Very pretty.

Please tell us more about your prep and tru oil finishing process - it's fantastic.

Yes, I do pore fill and prep the surface as meticulously as I am capable, with a final sanding to 400 grit. I mask the fingerboard extension and bridge footprints with carefully cut pieces of Frisket, seal the entire body with dewaxed shellac, and then start in with the Tru-Oil. If I were a professional I would surely consider the public perception of all aspects of my work, aiming to incorporate what "sells." As it is, I don't have to worry about any of that, leaving me free to build with any woods and materials I like and make anything I like. What's not to like?

_________________
George :-)

Nice job there ole blood and stitches!

That is a true beauty!!! Such great detail

_________________
Joe Beaver
Maker of Sawdust

Very impressive George - Mike G

_________________
guitarsbygiltzow.com

Lovely guitar! I’m a big fan of walnut. I am envious of you guys that can easily get Tru-oil. I live in California. Nuff said.


Sent from my iPhone using Tapatalk

Nathan, i've had it shipped to me on an amazon prime order.....