Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Dec 11, 2024 8:44 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 26 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Fri Nov 17, 2017 10:11 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Thoughts on Padauk as Finger boards and Bridges ? idunno

Also what are some of the other " Different " woods you have used ?

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 10:23 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3613
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
I’ve used Bocote which worked out fine. Would the large pores in Padauk cause an issue as a FB?

Image

Image

Sent from my iPhone using Tapatalk

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 10:33 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
bcombs510 wrote:
I’ve used Bocote which worked out fine. Would the large pores in Padauk cause an issue as a FB?


Not sure Kinda why im asking

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 10:35 am 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1484
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
This is a 12 to the body short scale 00 fanfret I did about 3 years ago. The owner loves it and it's holding up really well especially considering how he treats it. Personally I'm not a fan aesthetically. It's a major color statement!


You do not have the required permissions to view the files attached to this post.



These users thanked the author Michaeldc for the post: bcombs510 (Fri Nov 17, 2017 11:08 am)
Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 10:59 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3293
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
Twice I have used jatoba and I really like the way it works and looks for a FB/bridge. I'm not good enough to tell you any actual information about its impact on tone as a bridge wood. I really like it and am on the look out for more. I'm making two guitars right now, one will be jatoba again and the other will be osage orange for the FB and Bridge. I'll let you see them someday if I ever finish ;)

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 11:09 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3613
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Michaeldc wrote:
This is a 12 to the body short scale 00 fanfret I did about 3 years ago. The owner loves it and it's holding up really well especially considering how he treats it. Personally I'm not a fan aesthetically. It's a major color statement!


Did you pore fill the FB? It seems you could pore fill, sand it all the way back and then oil it up as usual and it would look pretty good.

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 11:25 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Michaeldc wrote:
This is a 12 to the body short scale 00 fanfret I did about 3 years ago. The owner loves it and it's holding up really well especially considering how he treats it. Personally I'm not a fan aesthetically. It's a major color statement!


Im building a rosewood cutaway and I like the idea if a bold color statement . [:Y:]

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 11:36 am 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1484
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
bcombs510 wrote:
Michaeldc wrote:
This is a 12 to the body short scale 00 fanfret I did about 3 years ago. The owner loves it and it's holding up really well especially considering how he treats it. Personally I'm not a fan aesthetically. It's a major color statement!


Did you pore fill the FB? It seems you could pore fill, sand it all the way back and then oil it up as usual and it would look pretty good.


As I recall I tried using CA to pore fill the FB. The idiot move was doing it after fretting. I think if I pore filled prior to cutting the fret slots it would have turned out much better (always learning!).


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 11:38 am 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1484
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
WudWerkr wrote:
Michaeldc wrote:
This is a 12 to the body short scale 00 fanfret I did about 3 years ago. The owner loves it and it's holding up really well especially considering how he treats it. Personally I'm not a fan aesthetically. It's a major color statement!


Im building a rosewood cutaway and I like the idea if a bold color statement . [:Y:]


Then you are gonna love it!! :0)


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 12:50 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
If you're considering paduc, maybe you should look for some bloodwood. I've used it for several fretboards, but never a bridge. Mesquite is a little lighter in color, and would probably work fine as a fretboard and bridge. Here's bloodwood:
Attachment:
Clipboard01.jpg


You do not have the required permissions to view the files attached to this post.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon



These users thanked the author Rodger Knox for the post: WudWerkr (Fri Nov 17, 2017 1:39 pm)
Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 1:41 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
I would consider blood wood . However I have the Padauc in stock . It is a beautiful FB

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 1:45 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed May 04, 2016 4:17 am
Posts: 150
First name: Gary
Last Name: Leddington
Focus: Build
Status: Amateur
Padauk will turn deep-reddish/brown after about a year if not lacquered. And after several if lacquered.... So with and oiled or waxed bridge and fingerboard it wont be such a bold statement after a while... I have a stool that has turned if you want to see what it will look like.... PM me your email.

The pores should'nt be a problem... wenge is just as bad....

G.

_________________
www.leddingtonguitars.com


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 1:50 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Fasterthanlight wrote:
Padauk will turn deep-reddish/brown after about a year if not lacquered. And after several if lacquered.... So with and oiled or waxed bridge and fingerboard it wont be such a bold statement after a while... I have a stool that has turned if you want to see what it will look like.... PM me your email.

The pores should'nt be a problem... wenge is just as bad....

G.


Im familiar with what your talking about . Ive used it for back and sides on Mandos . Thanks for the input

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 3:55 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Aug 04, 2005 7:50 am
Posts: 3152
Location: Canada
I am bringing in 500 Indian Laurel finger boards and bridges as an option for those that want stay away from Rosewood. I have some back and side sets in this wood but no fingerboards and bridges so looking forward to seeing how they look, feel and sound. I will keep you posted!

Shane

_________________
Canada


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 4:55 pm 
Offline
Mahogany
Mahogany

Joined: Wed Mar 07, 2012 5:41 pm
Posts: 96
Location: Coquitlam, BC
First name: Kerry
Last Name: Werry
City: Coquitlam
State: British Columbia
Country: Canada
Focus: Build
Status: Amateur
I'd certainly be interested in trying these!

Kerry


Shane Neifer wrote:
I am bringing in 500 Indian Laurel finger boards and bridges as an option for those that want stay away from Rosewood. I have some back and side sets in this wood but no fingerboards and bridges so looking forward to seeing how they look, feel and sound. I will keep you posted!

Shane

_________________
My Website http://klw-strings.com
My Luthier's Blog...http://klwstrings.blogspot.com


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 5:23 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
I've used padauk for fingerboard and bridge with no issues. Did not pore fill the fingerboard.

http://www.swiftcreekguitars.com/om---p ... d-top.html

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 5:25 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
BTW - I've also used wenge with no issues...

http://www.swiftcreekguitars.com/l-00-12-fret.html

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 5:38 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
I have used it, seems fine, feels fine.
I'm not keen on the open grain though.


You do not have the required permissions to view the files attached to this post.

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Fri Nov 17, 2017 11:02 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 11, 2013 2:26 pm
Posts: 489
First name: Carl
Last Name: Dickinson
City: Forest Ranch
State: California
Zip/Postal Code: 95942
Country: USA
Focus: Build
Status: Amateur
I'm going to try some wood I've harvested in my yard..Manzanita. I milled some fingerboard and bridge blanks. The darker red one was sanded to 20" radius and wiped with Howards. Haven't tried to slot or fret one yet. I attached a pic of one of my woodpiles. If you want some, bring a truck. Makes good firewood.


You do not have the required permissions to view the files attached to this post.



These users thanked the author CarlD for the post (total 2): Jonny (Sat Nov 18, 2017 11:59 am) • ernie (Sat Nov 18, 2017 9:08 am)
Top
 Profile  
 
PostPosted: Sat Nov 18, 2017 9:38 am 
Offline
Koa
Koa
User avatar

Joined: Mon Nov 24, 2008 12:17 pm
Posts: 1170
City: Escondido
State: CA
Zip/Postal Code: 92029
Country: USA
Focus: Build
Status: Semi-pro
We’ve used Paduk for FB and bridges A LOT at Palomar College. Not me personally, because I am not a fan of the color it becomes after a couple of years. But I can attest that it works just fine.


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Sat Nov 18, 2017 9:41 am 
Offline
Koa
Koa
User avatar

Joined: Mon Nov 24, 2008 12:17 pm
Posts: 1170
City: Escondido
State: CA
Zip/Postal Code: 92029
Country: USA
Focus: Build
Status: Semi-pro
@CarlD I thought Manzanita is mildly toxic. Grubbing it out I was always warned to wear gloves and we never burned it. No issues?


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Sat Nov 18, 2017 10:12 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968
Pau Ferro makes a nice fingerboard if you can work with it. It has good color and close grain and is reasonably hard. It takes a good polish.


Top
 Profile  
 
PostPosted: Sat Nov 18, 2017 2:10 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 11, 2013 2:26 pm
Posts: 489
First name: Carl
Last Name: Dickinson
City: Forest Ranch
State: California
Zip/Postal Code: 95942
Country: USA
Focus: Build
Status: Amateur
I've been burning it for 20 years and other than leaving significant chunks of charcoal it's worked great, real hot fire. I looked it up on a couple of wood databases and there were no warnings of toxicity. I found some recipes for preparing the berries to eat and the bear and coyote poop around here contains a lot of it too. I do wear gloves and protective clothing while clearing it as the broken branches are real hard and sharp. It has caused quite a bit of damage to the tractor when it fights back, sheet metal, hydraulics and tires.


Top
 Profile  
 
PostPosted: Sat Nov 18, 2017 6:31 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968
CarlD wrote:
"I'm going to try some wood I've harvested in my yard..Manzanita."

I have a small scrap of Manzanita. If you can dry it and keep it from twisting it seems like it would make a fine fingerboard. If I lived closer I would certainly raid your wood pile (with permission bliss ).


Top
 Profile  
 
PostPosted: Sat Nov 18, 2017 8:59 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 11, 2013 2:26 pm
Posts: 489
First name: Carl
Last Name: Dickinson
City: Forest Ranch
State: California
Zip/Postal Code: 95942
Country: USA
Focus: Build
Status: Amateur
Clay, most of what I have was dead and dry for many years. Clearing was (and still is) done for fire protection. A 6" x 24" log weighs 20 Lbs +. If you pay for shipping I'll send one (or more). Maybe I'll mill some more blanks and list them in the classifieds when I get time. You guys let me know if you're interested (and how much they might go for).


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 26 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: J De Rocher and 42 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com