Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Dec 12, 2024 9:21 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 22 posts ] 
Author Message
 Post subject: How do you hold your....
PostPosted: Fri Nov 10, 2017 5:42 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
Necks white you carve them?
Nothing like stuff moving around while you try and work!
Gahhhhh
Clamp? Locator pins in the truss rod slit to keep it from going side to side ?
Sorry for so many posts lately.
Just venturing into territory I haven’t before


Sent from my iPhone using Tapatalk Pro


Top
 Profile  
 
PostPosted: Fri Nov 10, 2017 6:32 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Aug 27, 2011 1:59 pm
Posts: 379
First name: Ken
Last Name: Lewis
City: Mt. Pearl
State: NL
Country: Canada
Focus: Build
Status: Amateur
A google search turns up a whole bunch of options. Here's a holding fixture from a random website, fourth or fifth picture down.
It's similar to mine and what many use to hold the neck while carving.
Ken

http://edge.cs.drexel.edu/GICL/people/s ... rving.html


Top
 Profile  
 
PostPosted: Fri Nov 10, 2017 6:37 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Aug 27, 2011 1:59 pm
Posts: 379
First name: Ken
Last Name: Lewis
City: Mt. Pearl
State: NL
Country: Canada
Focus: Build
Status: Amateur
Lots of good guitar building info on that website btw.


Top
 Profile  
 
PostPosted: Fri Nov 10, 2017 7:25 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968
I screw them to a jig to rough them out with a router, and then use f body clamps to clamp them to the bench. It usually takes two clamps to secure them enough to keep them from moving. I'm sure there are better methods.


Top
 Profile  
 
PostPosted: Fri Nov 10, 2017 7:34 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3613
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
The few necks that I have carved I used something like what Ken posted. It doesn’t have to be super fancy, just enough to let you hit all the angles.


Sent from my iPhone using Tapatalk

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
PostPosted: Fri Nov 10, 2017 8:55 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
Less ideal than having a dedicated carving fixture, but I just clamped my last one in my Stew Mac vise around the 12th fret and went to work. It worked fine.


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 1:03 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2257
Location: Seattle WA
Focus: Build
Status: Semi-pro
Mostly use the stewmac vice for everything. Then, like many, I glue the fretboard on and carve the neck shaft on the edge of a 2x12 or similar clamped in the vice. One clamp holding the fretboard extension down and another holding the head down on a wedge screwed to the 2x12.

_________________
Pat


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 4:45 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5505
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
http://www.luthiersforum.com/forum/viewtopic.php?f=10117&t=26349

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 8:59 am 
Online
Contributing Member
Contributing Member

Joined: Tue Dec 17, 2013 10:52 pm
Posts: 3081
First name: Don
Last Name: Parker
City: Charleston
State: West Virginia
Zip/Postal Code: 25314
Country: USA
Focus: Build
Status: Amateur
After reading Safety Reminder #1472, my answer is "very carefully."

I use the same 2x12 thing most folks here seem to be using. You cut off a bit at the end, at a 15 degree angle, then glue the small cutoff piece onto the other side of the 2x12, creating a 15 degree incline. Drill some large holes for clamp heads at the headstock end and the fret extension end. Cut a notch where the nut would go, to deal with the transition from fingerboard to headstock. Clamp the whole shebang in something sturdy, but capable of being repositioned. It works very well.


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 11:32 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Jul 17, 2010 11:00 am
Posts: 363
First name: Rusty
If I’m just profiling the back of the neck I screw a padded backstop to the bench and push and pull my spokeshave. I do all my neck carving with the neck bolted to the body.Image


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 11:52 am 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
I’ve seen several references to that stew mac vise.
Seems expensive...
Is it that good ?


Sent from my iPhone using Tapatalk Pro


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 12:01 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2257
Location: Seattle WA
Focus: Build
Status: Semi-pro
Yes. Although the price has gone up 60% in 10 years, but I guess it still worth it for how much it gets used. Woodcraft has a similar one a little cheaper.

_________________
Pat


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 12:31 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri May 09, 2008 2:25 pm
Posts: 1957
First name: George
City: Seattle
State: WA
Country: USA
Focus: Build
Status: Amateur
doncaparker wrote:
After reading Safety Reminder #1472, my answer is "very carefully."

I use the same 2x12 thing most folks here seem to be using. You cut off a bit at the end, at a 15 degree angle, then glue the small cutoff piece onto the other side of the 2x12, creating a 15 degree incline. Drill some large holes for clamp heads at the headstock end and the fret extension end. Cut a notch where the nut would go, to deal with the transition from fingerboard to headstock. Clamp the whole shebang in something sturdy, but capable of being repositioned. It works very well.


Yup. I have the same kind of setup. Like any jig, it only works if you actually use it. Wish I hadn't left it on the shelf the other day. [headinwall]

_________________
George :-)


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 12:42 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1484
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
Here's what I'm doing.

The neck in the fixture is for my 27" scale baritone and it just fits....


You do not have the required permissions to view the files attached to this post.



These users thanked the author Michaeldc for the post: James Orr (Mon Nov 13, 2017 5:25 pm)
Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 1:33 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Nov 24, 2008 12:17 pm
Posts: 1171
City: Escondido
State: CA
Zip/Postal Code: 92029
Country: USA
Focus: Build
Status: Semi-pro
@Michaeldc that is the nicest version of that jig I've seen. Super clean and elegant.



These users thanked the author rlrhett for the post: Michaeldc (Sat Nov 11, 2017 1:42 pm)
Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 2:29 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Sat Jan 05, 2013 4:56 am
Posts: 56
First name: Theo
Last Name: Delaca
City: Fbks
State: Ak
Zip/Postal Code: 99712
Country: USA
Attachment:
IMG_1334.JPG
Attachment:
IMG_1335.JPG
Attachment:
IMG_1336.JPG
Attachment:
IMG_1337.JPG


Here's my version, it works pretty well but is not nearly as rigid as it should be, in that respect the 2x12 version is probably far superior. I'm only a hobby builder so I don't have a standard length, so I went with something pretty adjustable. I use both barrel nuts and hanger bolts depending on the instrument, both work with the mounting end of this, it will also take the neck with or without fretboard.

For the heel I usually just clamp the neck flat to my bench, or upright in my bench vise

I really like the look of michaeldc's jig, that looks awesome


Sent from my iPad using Tapatalk


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 3:43 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Oct 09, 2016 12:18 pm
Posts: 403
Location: Somerset UK
State: West Somerset
Country: UK
Focus: Build
Status: Amateur
This follows several other posters but there are two points: I am quite tall with a back problem, so raising the vice above normal bench level is useful, both for this and other tasks, and secondly it being a swivel vice it enables me to attack the work in the best direction and to get the light right for seeing where the curves have got to. I do the initial heavier carving with the neck clamped to the bench. This arrangement is better for the refining with spokeshaves and skew chisels. (This neck is not ready for carving but is there just to illustrate the technique.)


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Mon Nov 13, 2017 4:34 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Aug 12, 2009 1:13 am
Posts: 448
First name: Tim
Last Name: Allen
City: San Francisco
Focus: Build
Status: Amateur
Mine is a rough and ready version of they typical fixture shown, with a couple of variations.

Since I do most of the shaping before the fretboard is on, I've screwed a truss-rod size strip of wood in the center where it fits into the truss rod slot, which makes it easier to clamp the neck securely. (This is not an original idea.) For any sanding or touch-up shaping after the fingerboard is on, I remove the strip and tape some thin cork strips to run up each side of the fixture, holding the radiused fretboard securely.

I'm another person with a tendency to back problems, and I've had painful back spasms caused by leaning over the bench. My fixture is made of a 2X 6, and it is attached to a kind of base, which is just another piece of 2 X 6 at an angle, with a kind of bracket to make an "L." The base screws to the front and side of one of the legs of my assembly table (wing nuts on to hanger bolts) so that the whole neck is held at a convenient angle above the bench. I can stand or sit at a high stool. I think I've seen something similar at the Martin factory. This arrangement helps prevent back issues, and I also find it's easier to control rasps and chisels when I'm standing up straight. I learned that I could play the guitar better if I didn't huddle over the guitar, and it's the same with tool use.

_________________
Tim Allen
"Never hurry, never rest."


Top
 Profile  
 
PostPosted: Mon Nov 13, 2017 4:59 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Nothing fancy, but functional...


You do not have the required permissions to view the files attached to this post.

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
PostPosted: Mon Nov 13, 2017 5:27 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
SnowManSnow wrote:
I’ve seen several references to that stew mac vise.
Seems expensive...
Is it that good ?


Sent from my iPhone using Tapatalk Pro


It’s fantastic, Brandon. It’s the kind of thing where you forget how much you had to pony up for he second you handle it. The accessory nut making vise is equally awesome.


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Mon Nov 13, 2017 5:33 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3395
Location: Alexandria MN
Image

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.


Top
 Profile  
 
PostPosted: Mon Nov 13, 2017 7:25 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
James Orr wrote:
SnowManSnow wrote:
I’ve seen several references to that stew mac vise.
Seems expensive...
Is it that good ?


Sent from my iPhone using Tapatalk Pro


It’s fantastic, Brandon. It’s the kind of thing where you forget how much you had to pony up for he second you handle it. The accessory nut making vise is equally awesome.


Sent from my iPhone using Tapatalk

Thanks James I’ll be looking into it


Sent from my iPhone using Tapatalk Pro


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 22 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: doncaparker and 58 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com