Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Dec 12, 2024 12:25 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Terrifying top
PostPosted: Sat Aug 26, 2017 11:47 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun May 19, 2013 10:22 am
Posts: 727
First name: Brian
Last Name: McDonald
City: Okanagan Centre
State: British Columbia
Zip/Postal Code: V4V2H6
Country: Canada
Focus: Build
Status: Amateur
Nope, not a spelling error. While scraping and sanding this appeared. Yep, sanded through the b/w/b, the wenge was also compromised. I decided to to replace a portion of the rosette in place. It was that or replace the top on a bound box so there was nothing to lose.


You do not have the required permissions to view the files attached to this post.



These users thanked the author Bri for the post: Jonny (Mon Aug 28, 2017 8:52 pm)
Top
 Profile  
 
 Post subject: Re: Terrifying top
PostPosted: Sun Aug 27, 2017 6:28 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5505
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Nice save! Would never know.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
 Post subject: Re: Terrifying top
PostPosted: Sun Aug 27, 2017 7:34 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968
Good Job! I think adding the BW purfle inside the pearl improved the look over the original.


Top
 Profile  
 
 Post subject: Re: Terrifying top
PostPosted: Sun Aug 27, 2017 9:47 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2257
Location: Seattle WA
Focus: Build
Status: Semi-pro
Nice. I would be cracking a cold one after that!

_________________
Pat


Top
 Profile  
 
 Post subject: Re: Terrifying top
PostPosted: Sun Aug 27, 2017 10:14 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
HEck yeah that is a nice job, how did you center it so well?


Top
 Profile  
 
 Post subject: Re: Terrifying top
PostPosted: Sun Aug 27, 2017 5:11 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Sometimes fixes end up coming out better then the original design (it has for me). I have also found that if I walk away, think about over night, a fix idea will come to me...

Nice save Brian! Looks great! Be sure to post photos when you you're done.

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
 Post subject: Re: Terrifying top
PostPosted: Sun Aug 27, 2017 6:13 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Nice recovery! I've done a lot of them when I decided I wanted to change the look or style of the rosette, change to abalone, etc.
Usually these kinds of problems arise when one of two things happen. One is careless oversanding and too shallow of a rosette depth. By sanding the inside of the top fully, figuring your final thickness at the rosette and setting it to 1/2 the thickness (depth) of the final top plus excess on the outside of the top that you intend to sand down, you can be on your way to a successful final thickness near the 1/2 mark.
The other reason these things happen is because the inlays do not fully seat at the bottom of the slot.
Photo two seems to show some of that which may be the reason it all happened in the first place. Can't stress enough that the inlays must be clamped down solid to the bottom of the slot. That slot also must be clean on the bottom, nice and flat. A couple of doughnut shaped hardwood cauls and lots of C-clamps will take care of that problem. Many rosettes are not a one shot clamping solution.
Remember that rosettes are not just a pretty look on the top. They're prime import is to stiffen the top around the soundhole.
Steve is right about everything he said, except I have found over the years that you only get one chance to fix a mistake most all the time. After that you just end up with a bigger mess.


Last edited by Haans on Sun Aug 27, 2017 6:20 pm, edited 1 time in total.


These users thanked the author Haans for the post: TimAllen (Sun Aug 27, 2017 11:58 pm)
Top
 Profile  
 
 Post subject: Re: Terrifying top
PostPosted: Sun Aug 27, 2017 6:18 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun May 19, 2013 10:22 am
Posts: 727
First name: Brian
Last Name: McDonald
City: Okanagan Centre
State: British Columbia
Zip/Postal Code: V4V2H6
Country: Canada
Focus: Build
Status: Amateur
I knew the rosette was marginal when I finished it, but due to inherent laziness(and a the need to move forward) I attached it anyway. Thought I could save it but sanding gots to be done.

Thanks Colin, Clay, you are right on for the extra purfling line, Pat it was a margie,
Jf, I just snuck up on milling the temporary center until it fit snug.
Steve, pics coming soon for this. I am pretty pleased with the results so far, but until it gets strings its only a woodworking project.

Thanks all for the kind words.

B

_________________
My memory is so good, sometimes I remember things that never happened.



These users thanked the author Bri for the post: jfmckenna (Mon Aug 28, 2017 8:21 am)
Top
 Profile  
 
 Post subject: Re: Terrifying top
PostPosted: Sun Aug 27, 2017 6:24 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun May 19, 2013 10:22 am
Posts: 727
First name: Brian
Last Name: McDonald
City: Okanagan Centre
State: British Columbia
Zip/Postal Code: V4V2H6
Country: Canada
Focus: Build
Status: Amateur
This. I knew when I pulled the clamps off this was the case. Likely didn't clean the channel well.

Haans wrote:
The other reason these things happen is because the inlays do not fully seat at the bottom of the slot.


Hey, how else ya gonna learn.

B

_________________
My memory is so good, sometimes I remember things that never happened.


Top
 Profile  
 
 Post subject: Re: Terrifying top
PostPosted: Mon Aug 28, 2017 12:05 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Aug 12, 2009 1:13 am
Posts: 448
First name: Tim
Last Name: Allen
City: San Francisco
Focus: Build
Status: Amateur
Hans wrote: "I have found over the years that you only get one chance to fix a mistake most all the time. After that you just end up with a bigger mess."

Boy howdy.

If the first fix fails, you (or at least, I) have to just move forward and make the best of it, hopefully having determined the cause so it doesn't happen again. Thank you Hans for the benefit of your experience re typical causes for rosette sand-throughs and ways to prevent them.

_________________
Tim Allen
"Never hurry, never rest."



These users thanked the author TimAllen for the post: Haans (Mon Aug 28, 2017 6:43 am)
Top
 Profile  
 
 Post subject: Re: Terrifying top
PostPosted: Mon Aug 28, 2017 6:42 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Bri wrote:
This. I knew when I pulled the clamps off this was the case. Likely didn't clean the channel well.

Haans wrote:
The other reason these things happen is because the inlays do not fully seat at the bottom of the slot.


Hey, how else ya gonna learn.

B


My post was supposed to help people learn.
You add information after the OP. I am not a mind reader.
Like I said, "Nice recovery."
Good luck.


Top
 Profile  
 
 Post subject: Re: Terrifying top
PostPosted: Mon Aug 28, 2017 6:53 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7385
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Nice fix. I've done several that way. Got another one in the shop that needs a complete rosette replacement that I'll get to shortly.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com