Official Luthiers Forum! • View topic

Board index » Mandolin - Mandola - Ukulele Forum

All times are UTC - 5 hours

Forum rules

Same rules apply to all forums at the Luthiers Forum.

Octave Mandolin plan

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

nathanpeirson

Post subject: Octave Mandolin plan

Posted: Sun Jun 25, 2017 9:55 am

Cocobolo

Joined: Thu Oct 20, 2016 7:22 pm
Posts: 123
First name: Nathan
Last Name: Peirson
Country: USA
Focus: Build
Status: Amateur

Hi folks, I am looking for comprehensive octave mandolin plans...bracing, fret placement, neck scale, etc.
There are a few out there and I hope to find out which one has the most info (without buying all of them).
Thanks for any and all information. Play on!!

Top

Steve Marcq

Post subject: Re: Octave Mandolin plan

Posted: Fri Jun 30, 2017 2:20 pm

Cocobolo

Joined: Wed Sep 03, 2008 9:14 pm
Posts: 102
Location: Allenstown, NH
First name: Steve
Last Name: Marcq
City: Allenstown
State: NH
Zip/Postal Code: 03275
Country: USA
Focus: Build
Status: Amateur

Hi Nathan,

I bought the Don Kawalek plans, and am building one now. I'm modifying the bracing somewhat, radiusing the top and back etc, but the plans themselves were pretty clear and thorough, with measurements, blown-up detail and so forth. I don't think it would be a problem to build one from scratch for anyone. Good luck!

These users thanked the author Steve Marcq for the post: nathanpeirson (Mon Jul 03, 2017 9:10 am)

Top

mountain whimsy

Post subject: Re: Octave Mandolin plan

Posted: Thu Jul 06, 2017 5:59 pm

Cocobolo

Joined: Mon Jan 14, 2013 3:25 pm
Posts: 341
Location: Bozeman, MT
First name: Tony
Last Name: Thatcher
City: Bozeman
State: MT

Steve Marcq wrote:

Same here. Just finished mine and it all worked out pretty well. There are a few confusing parts of his instructions, but nothing that can't be worked out. I also added a radiused top and back. As soon as I get some decent photos, I'll post them on my Octave Mandolin Top Thickness thread http://www.luthiersforum.com/forum/viewtopic.php?f=10128&t=48906. But here's a taste.

_________________
Tony Thatcher
Bozeman, Montana

These users thanked the author mountain whimsy for the post: nathanpeirson (Fri Jul 07, 2017 1:14 am)

Top

Alaska Splty Woods

Post subject: Re: Octave Mandolin plan

Posted: Tue Jul 18, 2017 5:39 pm

OLF Sponsor

Joined: Fri Aug 28, 2015 5:26 pm
Posts: 339
Location: Craig, Alaska
First name: Brent
Last Name: Cole Sr
City: Craig
State: Alaska
Zip/Postal Code: 99921
Country: USofA
Focus: Build
Status: Professional

An FYI for you folks. We at Alaska Specialty Woods, Inc. Produce and have in stock Mandola and Octave fronts from our Salvage sourced Old Growth Sitkla Spruce [Mostly high grade]. We have been supplying Weber Mandolins with these for quite a few years. They are not listed in our current online store, but will be in our new web page/online store that should be launched very soon. If anyone needs some now, email us.

These users thanked the author Alaska Splty Woods for the post (total 2): Steve Marcq (Tue Sep 12, 2017 2:41 pm) • nathanpeirson (Tue Jul 18, 2017 6:00 pm)

Top

Page 1 of 1

[ 4 posts ]

Board index » Mandolin - Mandola - Ukulele Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 34 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: