Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Nov 24, 2024 6:07 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Fret polishing
PostPosted: Tue Nov 22, 2016 9:10 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Oct 24, 2013 9:06 am
Posts: 102
First name: Mark
Last Name: Gammell
State: NE
Country: USA
How do you guys polish frets? I can get them "pretty good", but I see guitars with mirror polished frets and try as I might, I just can't get them quite that smooth & shiny. What I've been doing lately (with my best results) is using Stew Mac fret erasers. After I get them crowned and the ends dressed I use 800 (blue), 2000 (green), and 8000 (yellow) grit erasers. Then I go over them with a fret polishing micro abrasive paper (I don't remember the grit or where I got it). They look and play pretty good, but I'm looking for that really shiny smooth finish.

Any help?

Thanks

_________________
"Real guitars are for old people, Mr. Marsh."

Eric Cartman


Top
 Profile  
 
 Post subject: Re: Fret polishing
PostPosted: Tue Nov 22, 2016 9:43 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5821
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
My method... sand the length of the fret using wet-or-dry 320, then wet-or-dry 600. Finally, buff with white Meguiar paste. Looks like chrome! No evil steelwool. (if you must, use Scotchbrite)

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
 Post subject: Re: Fret polishing
PostPosted: Tue Nov 22, 2016 11:41 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
We have a machine that puts a high polish on the frets in only a couple of minutes.

We call it the Collin's Fret Buffer since David Collins invented it. It was also invented out of a study that Dave was doing of vintage methods and tooling at the old G*bson Plant on Parsons Street. Those guitars look like they were subjected to a wire wheel which was the inspiration for the Collins Fret Buffer.

Mind you we are a commercial repair facility and do fret work every day so it may be over kill for you, I understand that.

The buffer uses progressive grits of 3M abrasive impregnated wheels. We can get a mirror shine very quickly. IME we also can do hundreds of guitars and have before these wheels need replacement.


You do not have the required permissions to view the files attached to this post.



These users thanked the author Hesh for the post: Clinchriver (Wed Nov 30, 2016 5:56 am)
Top
 Profile  
 
 Post subject: Re: Fret polishing
PostPosted: Tue Nov 22, 2016 11:49 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jun 08, 2014 10:06 pm
Posts: 414
First name: Allan
Last Name: Bacon
State: Kansas
Country: USA
Focus: Repair
https://www.youtube.com/watch?v=_v6IvrU8gqw
Start at 12:31 for Freddy's polishing methods. It's a bit time consuming, but it works wonders.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: Fret polishing
PostPosted: Tue Nov 29, 2016 8:50 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Oct 24, 2013 9:06 am
Posts: 102
First name: Mark
Last Name: Gammell
State: NE
Country: USA
Thanks for the replies, guys. I'll give some of these things a try.

Am I the only one who wants to lay that thing of Hesh's down in the street and see how fast it will go? Maybe it's just the 13 year-old inside me that rears his head at the most inopportune moments.

_________________
"Real guitars are for old people, Mr. Marsh."

Eric Cartman



These users thanked the author Bill Braske for the post: Hesh (Wed Nov 30, 2016 7:34 am)
Top
 Profile  
 
 Post subject: Re: Fret polishing
PostPosted: Tue Nov 29, 2016 10:34 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7376
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Bill Braske wrote:
Thanks for the replies, guys. I'll give some of these things a try.

Am I the only one who wants to lay that thing of Hesh's down in the street and see how fast it will go? Maybe it's just the 13 year-old inside me that rears his head at the most inopportune moments.


Ha - I've had the opportunity to test drive that one and I will admit, it is a bit intimidating at first :shock:

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post: Hesh (Wed Nov 30, 2016 7:34 am)
Top
 Profile  
 
 Post subject: Re: Fret polishing
PostPosted: Tue Nov 29, 2016 6:38 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
SteveSmith wrote:
Bill Braske wrote:
Thanks for the replies, guys. I'll give some of these things a try.

Am I the only one who wants to lay that thing of Hesh's down in the street and see how fast it will go? Maybe it's just the 13 year-old inside me that rears his head at the most inopportune moments.


Ha - I've had the opportunity to test drive that one and I will admit, it is a bit intimidating at first :shock:


I opted to polish by hand instead of potentially eating my guitar! :oops:

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker



These users thanked the author Alex Kleon for the post: Hesh (Wed Nov 30, 2016 7:34 am)
Top
 Profile  
 
 Post subject: Re: Fret polishing
PostPosted: Wed Nov 30, 2016 2:05 am 
Offline
Walnut
Walnut
User avatar

Joined: Sat Nov 26, 2016 3:51 pm
Posts: 37
First name: Lou
Last Name: Moritz
City: Fords
State: New Jersey
Zip/Postal Code: 08863
Country: United States
I use a Dremel with a felt wheel chucked into it. I load the wheel with Menzerna Polishing compound and run the felt pad over the fret once or twice....comes out looking like a newly chromed bumper !
Just make sure you use masking tape to tape off both sides of the fret your polishing.


You do not have the required permissions to view the files attached to this post.



These users thanked the author SG Lou for the post: Hesh (Wed Nov 30, 2016 7:34 am)
Top
 Profile  
 
 Post subject: Re: Fret polishing
PostPosted: Wed Nov 30, 2016 6:00 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Alex Kleon wrote:
SteveSmith wrote:
Bill Braske wrote:
Thanks for the replies, guys. I'll give some of these things a try.

Am I the only one who wants to lay that thing of Hesh's down in the street and see how fast it will go? Maybe it's just the 13 year-old inside me that rears his head at the most inopportune moments.


Ha - I've had the opportunity to test drive that one and I will admit, it is a bit intimidating at first :shock:


I opted to polish by hand instead of potentially eating my guitar! :oops:

Alex


I was first in line and was very impressed with the Collins's fret buffer, not sure if I can
justify a 4 wheel unit but having the wheels to mount on my buffer would be nice.



These users thanked the author Clinchriver for the post: Hesh (Wed Nov 30, 2016 7:35 am)
Top
 Profile  
 
 Post subject: Re: Fret polishing
PostPosted: Wed Nov 30, 2016 3:32 pm 
Offline
Koa
Koa

Joined: Wed Feb 17, 2016 8:54 am
Posts: 854
State: Texas
Country: United States
Focus: Repair
The Music Nomad Frine stuff gets some decent results provided you have the frets sanded and polish enough. Just gives a little extra sheen that's nice


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 30 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com