Official Luthiers Forum!

I was cutting a scarf joint for my neck aiming for a 15 degree angle and ending up with a 19 degree angle. Is there any way i can correct the angle.

_________________
Guns don't kill people, people kill people, and monkeys do too (if they have a gun)
-Eddie Izzard

You only need to shorten up by 1/16" on a 3/4 board to get the angle back where you want it. As long as the neck and head are not at exact length it shouldn't be a problem to adjust the angles.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/