***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Nov 26, 2024 7:54 pm


Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
dzsmith
 Post subject: Native Texas Tele
PostPosted: Sun Nov 10, 2013 2:59 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
I whittled out a Tele for my son's X-mas present.
This one is Sycamore, Pecan, and Mesquite. The lumber was cut in Central Texas.
25.3 scale, 14" radius, nitro finish. GF hardware.
I cut two large openings in the body core and used it as a template to hollow out the top and bottom plates.
The large radii on the body edges are not in the Tele style, but it's easy on the leg.
I don't like the string tee's and I may use a bar on the next one to get a sharper string angle past the nut.
The mesquite is quite hard and it took lot's of elbow grease to sand it down.
Regards,
Dan


You do not have the required permissions to view the files attached to this post.

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
Dekka
 Post subject: Re: Native Texas Tele
PostPosted: Sun Nov 10, 2013 3:15 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Thu Mar 14, 2013 3:23 pm
Posts: 51
First name: Derek
Last Name: Dowding
City: Wallsend
State: NSW
Zip/Postal Code: 2287
Country: Australia
Focus: Build
Status: Amateur
That is tele-riffic!

_________________
I've got a mind like a steel......whatsername!!?


These users thanked the author Dekka for the post: dzsmith (Sun Nov 10, 2013 4:19 pm)
Top
 Profile  
 
JEguitars
 Post subject: Re: Native Texas Tele
PostPosted: Sun Nov 10, 2013 3:35 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Nov 16, 2012 12:27 am
Posts: 124
First name: Jimmy
Last Name: Edwards
City: Boston
State: MA
Focus: Build
Status: Professional
How was it making the nut and setting string height on that? That is one steep angle from nut to tuning pegs.
Top
 Profile  
 
nyazzip
 Post subject: Re: Native Texas Tele
PostPosted: Sun Nov 10, 2013 3:42 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Jul 11, 2011 12:43 am
Posts: 1326
Location: chicagoland, illinois
City: chicagoland
State: illinois
Country: usa
Focus: Build
Status: Amateur
very nice/tasteful....i don't like about 95% of the DIY electric builds i see, but this one is cool


These users thanked the author nyazzip for the post: dzsmith (Sun Nov 10, 2013 4:19 pm)
Top
 Profile  
 
dzsmith
 Post subject: Re: Native Texas Tele
PostPosted: Sun Nov 10, 2013 4:17 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
JEguitars wrote:
How was it making the nut and setting string height on that? That is one steep angle from nut to tuning pegs.

Hey Jimmy, I was a bit difficult. I carved the "truss rod cover" out of some Pecan heartwood to add some heavy duty bracing.
I added a veneer to the back of the headstock. I could call it a feature, but actually I cut the headstock too thin, thus the extra space between the nut and headstock.
Dan

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
dzsmith
 Post subject: Re: Native Texas Tele
PostPosted: Sun Nov 10, 2013 4:26 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
nyazzip wrote:
very nice/tasteful....i don't like about 95% of the DIY electric builds i see, but this one is cool

I sincerely thank you!
I should have made the body core out of Mesquite to tie the wood colors together.
Dan

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
sdsollod
 Post subject: Re: Native Texas Tele
PostPosted: Sun Nov 10, 2013 6:06 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Very nice. Good job!

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


These users thanked the author sdsollod for the post: dzsmith (Sun Nov 10, 2013 7:05 pm)
Top
 Profile  
 
Shaw
 Post subject: Re: Native Texas Tele
PostPosted: Sun Nov 10, 2013 6:20 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2011 2:21 am
Posts: 668
Location: Philadelphia
First name: Michael
Last Name: Shaw
City: Philadelphia
State: PA
Zip/Postal Code: 19125
Country: USA
Focus: Repair
Status: Semi-pro
Looks great! Mike

_________________
Another day, another dollar.


These users thanked the author Shaw for the post: dzsmith (Sun Nov 10, 2013 7:06 pm)
Top
 Profile  
 
theguitarwhisperer
 Post subject: Re: Native Texas Tele
PostPosted: Sat Nov 16, 2013 4:30 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional
dzsmith wrote:
nyazzip wrote:
very nice/tasteful....i don't like about 95% of the DIY electric builds i see, but this one is cool

I sincerely thank you!
I should have made the body core out of Mesquite to tie the wood colors together.
Dan


I think it looks fine. I like the contrast. It doesn't look out of place at all.

_________________
Old growth, shmold growth!


These users thanked the author theguitarwhisperer for the post: dzsmith (Sat Nov 16, 2013 5:59 pm)
Top
 Profile  
 
cphanna
 Post subject: Re: Native Texas Tele
PostPosted: Sat Nov 16, 2013 8:01 pm 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
I agree with the way Derek expressed his opinion: Teleriffic. I think it's a very cool little axe, and I am usually not much given over to electrics. But I sure like yours.
Patrick


These users thanked the author cphanna for the post: dzsmith (Thu Nov 21, 2013 5:22 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 35 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com