***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 12:14 pm


Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 2
  [ 29 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
puckster44
PostPosted: Mon Jun 04, 2012 11:52 pm 
Offline
Walnut
Walnut
User avatar

Joined: Mon Jun 04, 2012 9:29 am
Posts: 23
First name: David
Last Name: Hockey
City: Ellenbrook
State: WA
Zip/Postal Code: 6069
Country: Australia
Focus: Build
Status: Amateur
Hi all. I thought I would share with you some pics of the Tele (loosely based) I am building. As this is my first guitar I have built, it looks a bit scrappy I know, but hey, I have to start somewhere.

I was given some Swamp Mahogany for free from a guy I met at a saw mill here in Perth, on the proviso I show him the finished product. Nice bloke. I then bought all the hardware, including a 22 fret Yellow Maple neck from ebay (I know, I know, but like I said, this is my first crack, I wasn't spending megabucks). The neck makes this build a 25.5 inch scale.

Feel free to comment or ask. Remember it looks ordinary now because I am still going, plus I don't have a router (I have to use my Father-in-law's router) so a lot of things are done with forstner bits and chisel.

Attachment:
100_3597.jpg

Attachment:
100_3598.jpg

Attachment:
100_3609.JPG

Attachment:
100_3613.JPG


You do not have the required permissions to view the files attached to this post.

_________________
Epiphone LP Studio Dark Wine (wish it was a Gibson)
Ibanez EDP400 Transparent Red Bass
Ashton 12-string Accoustic
Flying V Ukelele Black
Home-made Telecaster Natural Swamp Mahogany Colour


"Never argue with an idiot, those watching may not be able to tell the difference."
Top
 Profile  
 
puckster44
PostPosted: Tue Jun 05, 2012 12:04 am 
Offline
Walnut
Walnut
User avatar

Joined: Mon Jun 04, 2012 9:29 am
Posts: 23
First name: David
Last Name: Hockey
City: Ellenbrook
State: WA
Zip/Postal Code: 6069
Country: Australia
Focus: Build
Status: Amateur
I did these parts yesterday.

Attachment:
100_3842.JPG

Attachment:
100_3843.JPG

Attachment:
100_3844.JPG

Attachment:
100_3845.JPG

Attachment:
100_3846.JPG

Attachment:
100_3847.JPG


You do not have the required permissions to view the files attached to this post.

_________________
Epiphone LP Studio Dark Wine (wish it was a Gibson)
Ibanez EDP400 Transparent Red Bass
Ashton 12-string Accoustic
Flying V Ukelele Black
Home-made Telecaster Natural Swamp Mahogany Colour


"Never argue with an idiot, those watching may not be able to tell the difference."
Top
 Profile  
 
puckster44
PostPosted: Tue Jun 05, 2012 12:12 am 
Offline
Walnut
Walnut
User avatar

Joined: Mon Jun 04, 2012 9:29 am
Posts: 23
First name: David
Last Name: Hockey
City: Ellenbrook
State: WA
Zip/Postal Code: 6069
Country: Australia
Focus: Build
Status: Amateur
I have created a nice fitting neck pocket, however I feel the neck may need to sit lower than this. What depth should the pocket be? The neck is 26mm high, and the pocket is currently 18mm deep. Should I go lower based on the pictures?

Attachment:
100_3848.JPG

Attachment:
100_3849.JPG

Attachment:
100_3850.JPG

Attachment:
100_3851.JPG

Attachment:
100_3852.JPG


Any comments or ideas are appreciated. How will I know it is at the right height? Alignment is not an issue, I've got some good literature on how to assure that.

Should the fretboard overhang sit flush on the body or just above it, if so by how much? I just don't have the experience to know.


You do not have the required permissions to view the files attached to this post.

_________________
Epiphone LP Studio Dark Wine (wish it was a Gibson)
Ibanez EDP400 Transparent Red Bass
Ashton 12-string Accoustic
Flying V Ukelele Black
Home-made Telecaster Natural Swamp Mahogany Colour


"Never argue with an idiot, those watching may not be able to tell the difference."
Top
 Profile  
 
RogerC108
PostPosted: Tue Jun 05, 2012 4:12 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Jan 27, 2008 1:40 pm
Posts: 455
Location: Stillwater, Oklahoma
First name: Roger
State: Oklahoma
Focus: Build
Status: Amateur
looking good so far. As for neck pocket depth, a standard tele neck is 1" thick at the heel with a 5/8" deep neck pocket. this leaves 3/8" above the body. It all depends on your bridge though. I would get your bridge on there and see how high the strings sit above the fretboard. If you have to raise your saddles ridiculously high, then you know you need to deepen your neck pocket.
Top
 Profile  
 
dzsmith
PostPosted: Tue Jun 05, 2012 5:52 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Looks great! It looks like you know what you are doing.

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
puckster44
PostPosted: Tue Jun 05, 2012 11:42 pm 
Offline
Walnut
Walnut
User avatar

Joined: Mon Jun 04, 2012 9:29 am
Posts: 23
First name: David
Last Name: Hockey
City: Ellenbrook
State: WA
Zip/Postal Code: 6069
Country: Australia
Focus: Build
Status: Amateur
Thanks for the comments. Looks like I know what I'm doing? Ha ha, I've fooled at least one person then... :) I actually have no idea, other than some lessons learnt along the way, and a LOT of thought and research in books and on websites like this one.

I decided to shave another 2 mm off the neck pocket, which is pretty much done, however I'm going through some minor frustrations [headinwall] trying to level it out now, shaving off the little imperfections using a chisel and eyesight with a straight edge. I've told the wife, that I will NOT build another one without a router!!! However, I can say that I think I'm better off for the experience doing it this way, because I know I can make minor adjustments to things I route in the future.

When I get the neck mounted and I'm happy, I'll post some more pics of it.

_________________
Epiphone LP Studio Dark Wine (wish it was a Gibson)
Ibanez EDP400 Transparent Red Bass
Ashton 12-string Accoustic
Flying V Ukelele Black
Home-made Telecaster Natural Swamp Mahogany Colour


"Never argue with an idiot, those watching may not be able to tell the difference."
Top
 Profile  
 
Irving
PostPosted: Wed Jun 06, 2012 2:23 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Apr 28, 2012 7:27 pm
Posts: 277
First name: James
Last Name: Greene
State: Maine
Focus: Build
Status: Semi-pro
Hold a straightedge off of the fretless fretboard so that it is hovering over your bridge scale length line. I go for 12/32" of clearance above the body top for hardtail tele type bridges.
Top
 Profile  
 
theguitarwhisperer
PostPosted: Wed Jun 06, 2012 7:02 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional
Also, if you are using a pickguard, you must be aware that the fretboard overhang must clear the pickguard, otherwise the neck may not seat properly in the pocket, and you may even crack the fretboard extension.

_________________
Old growth, shmold growth!
Top
 Profile  
 
puckster44
PostPosted: Wed Jun 06, 2012 9:08 am 
Offline
Walnut
Walnut
User avatar

Joined: Mon Jun 04, 2012 9:29 am
Posts: 23
First name: David
Last Name: Hockey
City: Ellenbrook
State: WA
Zip/Postal Code: 6069
Country: Australia
Focus: Build
Status: Amateur
Irving: Thanks for that advice, I will check that clearance and see how it looks.

theguitarwhisperer: Originally I was going to use a pickguard, but I have decided that I love the colour of the Mahogany and will just go for a totally natural look with clear laquer. But thanks for the advice, it's not something I had considered. Worst case, I could have cut some of the pick guard away if it was an issue.

General Question to all I have a plate and wood screws to attach the neck with. How far into the neck should the screws protrude to ensure that the strings wont lever the neck away from the body? At the moment, a general guess is that they will go in approximately 0.750" including the tip. I might be just paranoid, but it doesn't seem quite long enough. Can someone re-assure me that I'm worrying a bit too much?

_________________
Epiphone LP Studio Dark Wine (wish it was a Gibson)
Ibanez EDP400 Transparent Red Bass
Ashton 12-string Accoustic
Flying V Ukelele Black
Home-made Telecaster Natural Swamp Mahogany Colour


"Never argue with an idiot, those watching may not be able to tell the difference."
Top
 Profile  
 
VirgilGuitar
PostPosted: Wed Jun 06, 2012 9:28 am 
Offline
Koa
Koa
User avatar

Joined: Wed Apr 13, 2011 9:21 am
Posts: 783
First name: Virgil
Last Name: Mandanici
State: FL
Focus: Build
Welcome David!
This looks really cool - nice piece of wood too! Keep them pics coming!

_________________
"Talking about music is like dancing over architecture".
See the most insane first guitar build: http://www.virgilguitar.com
http://www.youtube.com/VirgilGuitar
Top
 Profile  
 
muskr@
PostPosted: Wed Jun 06, 2012 2:49 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Sep 29, 2011 2:54 pm
Posts: 115
First name: Andrew
City: Ottawa
State: ON
Focus: Build
Status: Amateur
Looks like its coming along quite well. Maybe if it turns out well you could try making a replacement for that gross yellow neck :) .
I think the screws usually stop an eighth of an inch or so below the bottom of the fingerboard.
Top
 Profile  
 
dzsmith
PostPosted: Wed Jun 06, 2012 5:43 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
puckster44 wrote:
Irving: Thanks for that advice, I will check that clearance and see how it looks.

theguitarwhisperer: Originally I was going to use a pickguard, but I have decided that I love the colour of the Mahogany and will just go for a totally natural look with clear laquer. But thanks for the advice, it's not something I had considered. Worst case, I could have cut some of the pick guard away if it was an issue.
Yes, I would not cover the nice mahogany with a big chunk of plastic. I'd rather have scratches and wear rather than a cheesy piece of plastic covering the top. Looking great! Any plans for type of finish yet?

General Question to all I have a plate and wood screws to attach the neck with. How far into the neck should the screws protrude to ensure that the strings wont lever the neck away from the body? At the moment, a general guess is that they will go in approximately 0.750" including the tip. I might be just paranoid, but it doesn't seem quite long enough. Can someone re-assure me that I'm worrying a bit too much?

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
theguitarwhisperer
PostPosted: Wed Jun 06, 2012 7:43 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional
4 or 5 threads per screw should be plenty. Likely you have more than that.

One time I screwed into a fret. That was close.

_________________
Old growth, shmold growth!
Top
 Profile  
 
puckster44
PostPosted: Wed Jun 06, 2012 9:51 pm 
Offline
Walnut
Walnut
User avatar

Joined: Mon Jun 04, 2012 9:29 am
Posts: 23
First name: David
Last Name: Hockey
City: Ellenbrook
State: WA
Zip/Postal Code: 6069
Country: Australia
Focus: Build
Status: Amateur
muskr@ wrote:
Looks like its coming along quite well. Maybe if it turns out well you could try making a replacement for that gross yellow neck :) .
I think the screws usually stop an eighth of an inch or so below the bottom of the fingerboard.


In that case the screws are probably about where I want them to be. Thanks. I will mount the neck this weekend and see how the action is. I have some Aluminium tape here, so I can shim if needed.

_________________
Epiphone LP Studio Dark Wine (wish it was a Gibson)
Ibanez EDP400 Transparent Red Bass
Ashton 12-string Accoustic
Flying V Ukelele Black
Home-made Telecaster Natural Swamp Mahogany Colour


"Never argue with an idiot, those watching may not be able to tell the difference."
Top
 Profile  
 
puckster44
PostPosted: Wed Jun 06, 2012 9:54 pm 
Offline
Walnut
Walnut
User avatar

Joined: Mon Jun 04, 2012 9:29 am
Posts: 23
First name: David
Last Name: Hockey
City: Ellenbrook
State: WA
Zip/Postal Code: 6069
Country: Australia
Focus: Build
Status: Amateur
What is the general consensus on truss rod position at fitment? Should I wind it all one way, then the other way counting the turns, then back to half way (neutral position) before fitment?

_________________
Epiphone LP Studio Dark Wine (wish it was a Gibson)
Ibanez EDP400 Transparent Red Bass
Ashton 12-string Accoustic
Flying V Ukelele Black
Home-made Telecaster Natural Swamp Mahogany Colour


"Never argue with an idiot, those watching may not be able to tell the difference."
Top
 Profile  
 
Mattia Valente
PostPosted: Thu Jun 07, 2012 5:09 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Jan 05, 2005 6:25 pm
Posts: 2749
Location: Netherlands
puckster44 wrote:
What is the general consensus on truss rod position at fitment? Should I wind it all one way, then the other way counting the turns, then back to half way (neutral position) before fitment?


It doesn't matter, as it's adjustable anyway. I do install a small fillet over the allied rods (as described on Allied's page) which compresses the flat bar of the dual action rod slightly, but I don't tension the rod in either direction prior to installation.
Top
 Profile  
 
puckster44
PostPosted: Sat Jun 16, 2012 9:20 am 
Offline
Walnut
Walnut
User avatar

Joined: Mon Jun 04, 2012 9:29 am
Posts: 23
First name: David
Last Name: Hockey
City: Ellenbrook
State: WA
Zip/Postal Code: 6069
Country: Australia
Focus: Build
Status: Amateur
It's been a couple of weeks since my last post. I managed to use a hand chisel to take a little more out of my neck pocket, but it was still not right. So I spent the money and bought a Router and a pattern following bit, and took a little more (approx 0.5 mm) out, which also leveled the pocket quite nicely. The result is below. I think it looks good, the action will be better once I assemble it after finishing and adjust the saddles and truss rod accordingly. So overall pretty happy with my first crack at this.

Lesson for all those playing at home: Use the right tools for the job the first time..... [:Y:]

Attachment:
100_3855.JPG

Attachment:
100_3856.JPG

Attachment:
100_3857.JPG

Attachment:
100_3858.JPG


You do not have the required permissions to view the files attached to this post.

_________________
Epiphone LP Studio Dark Wine (wish it was a Gibson)
Ibanez EDP400 Transparent Red Bass
Ashton 12-string Accoustic
Flying V Ukelele Black
Home-made Telecaster Natural Swamp Mahogany Colour


"Never argue with an idiot, those watching may not be able to tell the difference."
Top
 Profile  
 
VirgilGuitar
PostPosted: Sat Jun 16, 2012 10:01 am 
Offline
Koa
Koa
User avatar

Joined: Wed Apr 13, 2011 9:21 am
Posts: 783
First name: Virgil
Last Name: Mandanici
State: FL
Focus: Build
[:Y:] VERY cool! Routers come in handy for all sorts of things with guitar building - BUT, they can be very dangerous, so read all the safety stuff in the manual, wear safety glasses, etc... slightly easier than a chisel I would imagine!

_________________
"Talking about music is like dancing over architecture".
See the most insane first guitar build: http://www.virgilguitar.com
http://www.youtube.com/VirgilGuitar
Top
 Profile  
 
puckster44
PostPosted: Sat Jun 16, 2012 10:11 am 
Offline
Walnut
Walnut
User avatar

Joined: Mon Jun 04, 2012 9:29 am
Posts: 23
First name: David
Last Name: Hockey
City: Ellenbrook
State: WA
Zip/Postal Code: 6069
Country: Australia
Focus: Build
Status: Amateur
VirgilGuitar wrote:
[:Y:] VERY cool! Routers come in handy for all sorts of things with guitar building - BUT, they can be very dangerous, so read all the safety stuff in the manual, wear safety glasses, etc... slightly easier than a chisel I would imagine!


I'm definately richer for the experience though! I know how to the chisel for minor adjustments when needed now. Great experience.

_________________
Epiphone LP Studio Dark Wine (wish it was a Gibson)
Ibanez EDP400 Transparent Red Bass
Ashton 12-string Accoustic
Flying V Ukelele Black
Home-made Telecaster Natural Swamp Mahogany Colour


"Never argue with an idiot, those watching may not be able to tell the difference."
Top
 Profile  
 
Chameleon
PostPosted: Wed Jun 20, 2012 10:18 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Feb 07, 2011 8:15 pm
Posts: 529
First name: Mark
Last Name: Sorrentino
Focus: Build
Status: Amateur
I think the body looks too nice to have a neck made out of recycled tennis balls. Just my opinion.

_________________
http://www.tinyhouseandland.com
Top
 Profile  
 
puckster44
PostPosted: Thu Jun 21, 2012 6:20 am 
Offline
Walnut
Walnut
User avatar

Joined: Mon Jun 04, 2012 9:29 am
Posts: 23
First name: David
Last Name: Hockey
City: Ellenbrook
State: WA
Zip/Postal Code: 6069
Country: Australia
Focus: Build
Status: Amateur
Chameleon wrote:
I think the body looks too nice to have a neck made out of recycled tennis balls. Just my opinion.


LOL thanks for that...

I have used only cheap parts for this build because it's my first (neck included, $70 AUD off eBay). I have already thought about replacing all the parts, neck included, down the track when I am better at this and can better afford it.

_________________
Epiphone LP Studio Dark Wine (wish it was a Gibson)
Ibanez EDP400 Transparent Red Bass
Ashton 12-string Accoustic
Flying V Ukelele Black
Home-made Telecaster Natural Swamp Mahogany Colour


"Never argue with an idiot, those watching may not be able to tell the difference."
Top
 Profile  
 
puckster44
PostPosted: Thu Jun 21, 2012 6:24 am 
Offline
Walnut
Walnut
User avatar

Joined: Mon Jun 04, 2012 9:29 am
Posts: 23
First name: David
Last Name: Hockey
City: Ellenbrook
State: WA
Zip/Postal Code: 6069
Country: Australia
Focus: Build
Status: Amateur
I am thinking about doing a Strat-like comfort shape shave on the body for my right forearm, as well as the back of the guitar where it rubs against my lower chest. Any tips on what shape to conform to? Should I just plane and sand away until it feels right to me?

_________________
Epiphone LP Studio Dark Wine (wish it was a Gibson)
Ibanez EDP400 Transparent Red Bass
Ashton 12-string Accoustic
Flying V Ukelele Black
Home-made Telecaster Natural Swamp Mahogany Colour


"Never argue with an idiot, those watching may not be able to tell the difference."
Top
 Profile  
 
alan stassforth
PostPosted: Thu Jun 21, 2012 10:01 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
puckster44 wrote:
I am thinking about doing a Strat-like comfort shape shave on the body for my right forearm, as well as the back of the guitar where it rubs against my lower chest. Any tips on what shape to conform to? Should I just plane and sand away until it feels right to me?

Yup.
Nice job on the Tele!
Top
 Profile  
 
puckster44
PostPosted: Tue Aug 21, 2012 7:40 am 
Offline
Walnut
Walnut
User avatar

Joined: Mon Jun 04, 2012 9:29 am
Posts: 23
First name: David
Last Name: Hockey
City: Ellenbrook
State: WA
Zip/Postal Code: 6069
Country: Australia
Focus: Build
Status: Amateur
Hi all. Sorry it's been a while. I have been extremely busy, plus I have been building a lapsteel for a friend...

I have routed the edges of the guitar. I decided against the "comfort" angles, as it feels nice enough now the edges have been rounded over. Have a gander at the 2 pictures below.

All I have to do now is take a little more out of the bridge PUP pocket and sand and finish it. I have to go away to Darwin (Northern Australia for all you USA residents) for all of September then hopefully smash it out in October, with a good amount of time for it to dry.

Attachment:
100_3882.jpg


Attachment:
100_3883.jpg


So when I have more to report I shall...


You do not have the required permissions to view the files attached to this post.

_________________
Epiphone LP Studio Dark Wine (wish it was a Gibson)
Ibanez EDP400 Transparent Red Bass
Ashton 12-string Accoustic
Flying V Ukelele Black
Home-made Telecaster Natural Swamp Mahogany Colour


"Never argue with an idiot, those watching may not be able to tell the difference."
Top
 Profile  
 
puckster44
PostPosted: Fri Oct 19, 2012 9:14 am 
Offline
Walnut
Walnut
User avatar

Joined: Mon Jun 04, 2012 9:29 am
Posts: 23
First name: David
Last Name: Hockey
City: Ellenbrook
State: WA
Zip/Postal Code: 6069
Country: Australia
Focus: Build
Status: Amateur
Well after many weeks on deployment (I'm in the Royal Australian Air Force) I have finally been able to spend a day working on the guitar. My goal today was to sand it and put the first coat of sealant onto it. I used 60, 100, 150, 240 and 400 grits and she came up beautiful. There are cracks in the wood as well as stuff-ups, but I decided not to try to fix them as it adds to the character of the build, after all it's my first crack at it.

Here are some pics of it drying after sanding and first sealant coat.

Attachment:
Photo0099.jpg


Attachment:
Photo0100.jpg


Once I have the final gloss coats on I'll take some more photos, then it'll be built and the final pics for you guys to see. :D


You do not have the required permissions to view the files attached to this post.

_________________
Epiphone LP Studio Dark Wine (wish it was a Gibson)
Ibanez EDP400 Transparent Red Bass
Ashton 12-string Accoustic
Flying V Ukelele Black
Home-made Telecaster Natural Swamp Mahogany Colour


"Never argue with an idiot, those watching may not be able to tell the difference."


Last edited by puckster44 on Mon Oct 22, 2012 12:51 am, edited 1 time in total.

Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 29 posts ]  Go to page 1, 2  Next

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 22 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com