***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 5:49 pm


Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
WindyCityBluesBox
PostPosted: Sat Dec 17, 2011 1:46 pm 
Offline
Cocobolo
Cocobolo

Joined: Thu May 12, 2011 3:27 pm
Posts: 213
First name: Alex
Last Name: Takacs
State: Illinois
Country: United States
Focus: Build
Status: Amateur
[uncle] Well, I came back from college for Christmas which means I can work on my build! When I left the guitar last aim I was home (few weeks ago) everything was fine. I now realize that I sanded the neck down too much, because the change in temperature and humidity has made a clear outline of the truss rod slot up towards the headstock (i put a little water on the crack in the picture to help you see it better). Im using a traditional single action truss rod, not a double action truss so with a little bit of savy work, I think that this can be repaired. My idea is to get in there with a razor, and continue to break/cut the thin wood from the truss rod slot until it is a reasonable thickness, and then doing a partial skunk stripe that would only run down part of the neck. I also have two of the stewmac carbon fiber rods in the neck so strength will not be an issue at all. There is a gap between the bottom of the truss rod slot and the truss rod itself so I think Ill be able to get a good enough thickness. How does this sound to you guys, and what are your ideas to fix this? -Alex
PS: sorry for the blurry picture. If you need a clearer picture, let me know I can upload one. Image
Top
 Profile  
 
Tony_in_NYC
PostPosted: Sat Dec 17, 2011 4:57 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
I did that on a guitar. Fixed it the same way you describe. No issues 7 months later. Go for it!

_________________
http://www.CostaGuitars.com
PMoMC
Top
 Profile  
 
Mike Baker
PostPosted: Sun Dec 18, 2011 10:40 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
I don't see how this will fix anything. Is your truss rod installed in a slot that is too deep?
If not, and the slot is the proper depth, and the back of the neck is already shaped, then you'll have to sand the filler strip to the same thickness, and you'll end up with the same thin strip of wood behind the rod. Unless you plan to leave the filler strip proud of the back of the neck, which I don't see as an option.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.
Top
 Profile  
 
helldunkel
PostPosted: Mon Dec 19, 2011 8:23 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Jan 29, 2011 10:49 am
Posts: 164
Location: switzerland
First name: Patrick
Last Name: Hufschmid
City: Montreux
Country: Swizterland
Focus: Build
Status: Professional
WindyCityBluesBox wrote:
[uncle] Well, I came back from college for Christmas which means I can work on my build! When I left the guitar last aim I was home (few weeks ago) everything was fine. I now realize that I sanded the neck down too much, because the change in temperature and humidity has made a clear outline of the truss rod slot up towards the headstock (i put a little water on the crack in the picture to help you see it better). Im using a traditional single action truss rod, not a double action truss so with a little bit of savy work, I think that this can be repaired. My idea is to get in there with a razor, and continue to break/cut the thin wood from the truss rod slot until it is a reasonable thickness, and then doing a partial skunk stripe that would only run down part of the neck. I also have two of the stewmac carbon fiber rods in the neck so strength will not be an issue at all. There is a gap between the bottom of the truss rod slot and the truss rod itself so I think Ill be able to get a good enough thickness. How does this sound to you guys, and what are your ideas to fix this? -Alex
PS: sorry for the blurry picture. If you need a clearer picture, let me know I can upload one.


Throw it away and start a new neck....

If you ever sell this guitar to somebody (even if he is aware about the issue), chances are that for ever reason, one day, this wonderfull person will end up posting the pictures on a forum and this would instantly have people stereotype about your work and believe me, building a new neck is way more cheaper then the money you could potentially use if people know that you are selling instruments with that kind of issue...

Now if its for a personal project and that the instrument will stay in your house only for you, do whatever you want....

WindyCityBluesBox wrote:
because the change in temperature and humidity has made a clear outline of the truss rod slot up towards the headstock


dude, you cant just build a guitar "just like that" in an unappropriate environnement...

-What is the % of ambient humidity in your workshop?
-How dry was the neck in %?

_________________
http://hufschmidguitars.com
Top
 Profile  
 
WindyCityBluesBox
PostPosted: Mon Dec 19, 2011 8:38 pm 
Offline
Cocobolo
Cocobolo

Joined: Thu May 12, 2011 3:27 pm
Posts: 213
First name: Alex
Last Name: Takacs
State: Illinois
Country: United States
Focus: Build
Status: Amateur
Its pretty hard to explain this without showing a picture, but I'll do my best. I didnt route a curved channel, it is steps routed to different depths. The channel steps down getting deeper with each step toward the center, and then steps up higher again after the center. The crack is right at the beginning of one of these "steps" so I SHOULD be able to get a good 1/8in or so of thickness if I glue the skunk stripe all the way down touching to the truss (but I cant really be sure until I pick at it with a razor). This guitar is for me, and its a neck through (replacing the neck would be a huge pain) so Im just going to try to repair it and see how it goes! Hopefully all will go well!
Top
 Profile  
 
Mike Baker
PostPosted: Mon Dec 19, 2011 9:56 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
Good luck. Hope it works out.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 41 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com