Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 5:02 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Taping the Fretboard
PostPosted: Tue Jun 21, 2011 9:34 am 
Offline
Cocobolo
Cocobolo

Joined: Thu May 12, 2011 3:27 pm
Posts: 213
First name: Alex
Last Name: Takacs
State: Illinois
Country: United States
Focus: Build
Status: Amateur
Hey guys, Im back with another finishing question. Im building a guitar without binding and I was wondering exactly what parts of the fretboard you tape off, and when you install frets. What Im thinking is that Im going to tape off only the top of my fretboard, apply finish to the neck and sides of the fretboard but NOT the top, and then install frets. How correct does this sound? -Alex


Top
 Profile  
 
 Post subject: Re: Taping the Fretboard
PostPosted: Tue Jun 21, 2011 10:38 am 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
The taping proceedure is the one I use, but I'd install the frets before finish. Less chance you'd damage the finish installing them. My .02.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


Top
 Profile  
 
 Post subject: Re: Taping the Fretboard
PostPosted: Tue Jun 21, 2011 11:23 am 
Offline
Cocobolo
Cocobolo

Joined: Thu May 12, 2011 3:27 pm
Posts: 213
First name: Alex
Last Name: Takacs
State: Illinois
Country: United States
Focus: Build
Status: Amateur
Thanks Mike, do you apply finish to the sides of the fretboard, or only the top?


Top
 Profile  
 
 Post subject: Re: Taping the Fretboard
PostPosted: Tue Jun 21, 2011 4:21 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
WindyCityBluesBox wrote:
Thanks Mike, do you apply finish to the sides of the fretboard, or only the top?

If we're talking clear coat, yes, I do. If i'm building and using a solid color, the solid color stops at the edge of the side of the fretboard. Then I use a clear coat on top of that, which goes all the way up the sides of the fretboard, leaving only the face of the fretboard with no finish( assuming a dark, hard wood such as rosewood or ebony. Of course, maple fretboards are finished completely.).

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


Top
 Profile  
 
 Post subject: Re: Taping the Fretboard
PostPosted: Tue Jun 21, 2011 5:11 pm 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
I do what Mike does.


Top
 Profile  
 
 Post subject: Re: Taping the Fretboard
PostPosted: Tue Jun 21, 2011 8:04 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
Filippo Morelli wrote:
If you clip the barb ends, Mike, you don't have any concerns of ruining the finish. It's like a refret ...

Filippo

I understand that. But someone asking this question probably doesn't have the experience you and I have. Plus, a lot of finishes(especially nitro) can cure for a very long time. They can be soft and easy to scratch. And there are the inevitable bumps and moments of carelessness.
Also, he may not have a fret tang nipping tool, and/or may not be planning to do it that way.
I just gave him the best answer I could, considering the possiblilty of lesser experience.
Plus, I've refretted a lot of guitars. But when I build, I fret before I finish. It's just one more thing I don't have to worry about.
There are really no hard and fast rules here. Everyone has their own way of doing things, which may be right for them, and not for someone else. I just gave him my .02.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Bing [Bot] and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com