Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 10:32 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Tue Jun 07, 2011 11:45 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon May 03, 2010 2:19 pm
Posts: 262
First name: Al
Last Name: Darned
City: Toronto
Country: Canada
Focus: Build
Status: Amateur
I've looked at this a bit, but don't know too much about this area. Nor do I really want to, as my emphasis is on acoustics. HOWEVER ....

I have an electric that I had assembled in the 80s. It has a 70s strat neck, african walnut strat shape body, original floyd rose, and EMG active humbuckers (not sure which model), wired with vol, tone, tone & a 5 way that only really works as a 3 way.

I want to switch out the pickups for some passive humbuckers, something with mainly a clean warm sound, and replace all the crackly old pots, cover the cavities in grounding tape etc.

Not looking to spend a fortune on the humbuckers, and thinking the GFS Classic IIs maybe? Anyone have experience with these? http://www.guitarfetish.com/GFS-Classic-II-Alnico-2-Vintage-wound-Humbuckers-Black-_c_86.html

Or maybe the stewmac golden ages? http://www.stewmac.com/shop/Electronics,_pickups/Pickups:_Guitar,_electric/Golden_Age_Humbuckers.html

In terms of wiring it up, for a bit of flexibility, was looking at the seymour duncan site wirings, something like the "2vol, 1tone, 3way, push/pull," but am not super-clear on what the push/pull pot would do in this setup ... provide a split of whichever humbucker was selected? http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_2v_1t_3w_pp

Any input, clarification, or better ideas gratefully appreciated, thanks! :mrgreen:

_________________
If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason. - Jack Handey


Top
 Profile  
 
PostPosted: Tue Jun 07, 2011 4:51 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
Yeah, looks like the push/pull splits the 'buckers to me.
As for pickups, the GFS ones you mention I have been meaning to try. I bet they'd fit the bill for what you're looking for.
I have a set of their Vintage '59's that I love. They get a nice warm tone, but you won't get super clean out of them unless you back off the volume on the guitar slightly. IME with them, they push an amp pretty good, and you can get a nice, warm, yet slightly compressed tone out of them. The guitar they are in right now is the nicest sounding guitar I've ever owned, and I've owned some nice guitars(with some nice pups in them) in my day. i will definately use those pickups again.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


Top
 Profile  
 
PostPosted: Tue Jun 07, 2011 8:42 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon May 03, 2010 2:19 pm
Posts: 262
First name: Al
Last Name: Darned
City: Toronto
Country: Canada
Focus: Build
Status: Amateur
Thanks Mike, yeah, I think I will give that setup a go ... I'll letcha know how it turns out! :mrgreen:

(oh btw, the stewmac customer satisfaction ratings/reviews on the 3-way & 5-way switches is scary!!! any hints there? guess i can just go to a local shop for one)

_________________
If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason. - Jack Handey


Top
 Profile  
 
PostPosted: Tue Jun 07, 2011 8:46 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Feb 28, 2009 10:34 pm
Posts: 1065
First name: Rob
Last Name: McDougall
City: Cochrane
State: Alberta
I used the Vintage '59's on my last build - love 'em! Warm and just clean enough.
I have also used the Crunchy Pat's - and yes, they are nicely crunchy!


Top
 Profile  
 
PostPosted: Tue Jun 07, 2011 8:54 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Feb 02, 2008 4:01 pm
Posts: 1104
Location: Winfield, IL.
AlBDarned wrote:
In terms of wiring it up, for a bit of flexibility, was looking at the seymour duncan site wirings, something like the "2vol, 1tone, 3way, push/pull," but am not super-clear on what the push/pull pot would do in this setup ... provide a split of whichever humbucker was selected?



Hi Al,

You are correct, the p/p splits the coils on both pickups.

Steve


Top
 Profile  
 
PostPosted: Tue Jun 07, 2011 9:19 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon May 03, 2010 2:19 pm
Posts: 262
First name: Al
Last Name: Darned
City: Toronto
Country: Canada
Focus: Build
Status: Amateur
Cool, thanks guys [:Y:]

_________________
If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason. - Jack Handey


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com