Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Nov 25, 2024 5:12 am


All times are UTC - 5 hours


Forum rules


Be Nice to our new friends! Remember, everybody starts somewhere!




Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Mon May 02, 2011 2:47 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Mar 28, 2011 10:25 pm
Posts: 733
First name: John
Last Name: coloccia
Country: States
Focus: Build
Status: Semi-pro
Anyone here take the plunge and go entirely waterborne? I'm about to. I've played around with the waterborne finished enough now to really like what I'm seeing from the Target finishes.

Any experience spraying through a DeVilbiss EGA (a touch up gun)? It only comes with a 1.0mm tip, and as far as I know there are no other tips available. Also, are you adding color to the sealer or to the top coat?

Anyhow, I'm just curious about other's experience with this stuff so that maybe I can shorten my learning curve a little.


Top
 Profile  
 
PostPosted: Mon May 02, 2011 3:39 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Mar 28, 2011 10:25 pm
Posts: 733
First name: John
Last Name: coloccia
Country: States
Focus: Build
Status: Semi-pro
Woops, sorry. I meant to put this in the main building forum.


Top
 Profile  
 
PostPosted: Mon May 02, 2011 5:01 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 31, 2007 7:17 am
Posts: 1383
Location: Canada
John, if you search you'll find lots on waterbourne, Target, KTM or whatever. I've posted a couple of archtops recently that were finished with EM6000 & colourtone dyes, using a touchup gun with it's standard tip. (Sprayed both waterbased dye on bare wood & toned lacquer)

_________________
Dave
Milton, ON


Top
 Profile  
 
PostPosted: Tue May 03, 2011 9:04 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2150
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
I have switched to KTM-9 shot thru a small detail gun (don't know the tip size, whatever is standard with the gun). This is KTM-9 over Zpoxy

viewtopic.php?f=10104&t=29796


Top
 Profile  
 
PostPosted: Thu May 12, 2011 9:58 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 14, 2010 11:43 am
Posts: 668
First name: Aaron
Last Name: Craig
City: Kansas City
State: Missouri
Focus: Build
Status: Semi-pro
I have used the Colortone products and had mixed results. Shot from a gravity gun with 1.2 mm tip. First few coats over Zpoxy and a wash coat of dewaxed shellac crazed terribly. Had to sand back to Zpoxy. Used some retarder thereafter, and had better results. I didn't use the sanding sealer, just to the top coat finish. For toning, I add it to the top coat product and shoot after having sprayed 3 or so clear coats. Then, after getting the toning correct, I keep shooting clear till I hit my target thickness.

I've heard great things about KTM-SV. I think I'll be trying that out soon.

Good luck,

Aaron

_________________
Aaron Craig


Top
 Profile  
 
PostPosted: Thu May 12, 2011 10:09 am 
Offline
Contributing Member
Contributing Member

Joined: Tue Apr 17, 2007 3:50 am
Posts: 305
Location: Central Washington United States
I have used a couple waterborn finishes on several guitars after doing a couple with nitro. Mixed results. EM 6000 is ok for lighter wood. On darker wood I got a blue tint. I just sprayed the latest with nitro. What a difference. It went on so smooth and easy compared to EM 6000 I don't think I could go back to waterborn finishes.

_________________
Wisdom is justified by her children


Top
 Profile  
 
PostPosted: Fri May 13, 2011 8:55 am 
Offline
Koa
Koa
User avatar

Joined: Mon Mar 28, 2011 10:25 pm
Posts: 733
First name: John
Last Name: coloccia
Country: States
Focus: Build
Status: Semi-pro
Thanks all for the info. It does seem like waterborne just works for some people, and gives others huge headaches. Too bad there's so many variables it's difficult to figure out what's going wrong when it does go wrong. Maybe I'll be one of the lucky ones :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com