***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Nov 22, 2024 2:53 am


Board index » Kit Building 101 at the OLF!

All times are UTC - 5 hours


Forum rules


Be Nice to our new friends! Remember, everybody starts somewhere!




Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Print view Previous topic | Next topic 
Author Message
calgarc
 Post subject: Removing the Sound board
PostPosted: Sun Dec 12, 2010 7:57 pm 
Offline
Mahogany
Mahogany

Joined: Fri Aug 20, 2010 3:35 am
Posts: 69
First name: calgar
Last Name: c
City: Ottawa
Country: Canada
Focus: Build
Status: Amateur
i don't know what section to put this in but here goes.

i bought a cheap classical from used ottawa for 30 bucks, the guitar itself is in great shape, except for some small chips on the top. solid back and side laminate top

i would like to replace the laminate top with a new top, does anyone know a good way to remove the soundboard.


i am going through a phase where i buy cheap junk guitars from garage sales and rebuild them
Top
 Profile  
 
Tom West
PostPosted: Thu Dec 16, 2010 6:52 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 27, 2008 4:10 pm
Posts: 2764
First name: Tom
Last Name: West
State: Nova Scotia
Country: Canada
Focus: Build
Status: Amateur
calgarc: Go to Greven guitars on the web, open the site and look under extras and you will see an excellant tout on doing just this and you will see also just how talanted John Greven is.Good luck with your project,an excellant way to really learn what makes a guitar tick.
Tom

_________________
A person who has never made a mistake has never made anything!!!
Top
 Profile  
 
alan stassforth
PostPosted: Thu Dec 16, 2010 9:10 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
Calgar, great advice from Tom.
Mess around with those guitars, and you will learn a lot.
Might even make one sound good with your own top!
I know what i'd do to get the top off,
but i'm sure i'd give you some bad advice.
I'll tell you anyway.
I would pull the fret at where the f.b meets the body, cut through the f.b. with a vry fine kerf saw,
rout or get the bindings off, with a
sloane type cutter,
use a hot spatula to un-glue the top, if you can.
Heat the spatula up by some means, heat gun, blow torch, kitchen range?
Save the fretboard extension to re-use.
Top
 Profile  
 
theguitarwhisperer
PostPosted: Wed Feb 23, 2011 9:24 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional
Cutting the fretboard has dterimental effects. The fretboard extension resists lateral forces the strings exert along the guitar's length, specifically because it extends past the neck joint onto the soundboard.

_________________
Old growth, shmold growth!
Top
 Profile  
 
calgarc
PostPosted: Wed Feb 23, 2011 10:09 pm 
Offline
Mahogany
Mahogany

Joined: Fri Aug 20, 2010 3:35 am
Posts: 69
First name: calgar
Last Name: c
City: Ottawa
Country: Canada
Focus: Build
Status: Amateur
decided not to remove the top... ended up cutting and pressing my own longboard deck haha the guitar doesn't sound bad with the ply top though
Top
 Profile  
 
Ti-Roux
PostPosted: Sat Mar 05, 2011 9:44 am 
Offline
Koa
Koa
User avatar

Joined: Wed Oct 21, 2009 7:46 pm
Posts: 950
First name: Francis
Last Name: Richer
City: Montréal
State: Québec
Zip/Postal Code: H4G 2Z2
Country: Canada
Focus: Build
Status: Semi-pro
Is that a joke or something like that..?

BTW, how do you know B/S are solid wood? Pretty much all industry guitar in a 25 to 1000$ range are laminate B/S and solid top. So it would be very surprising from a company to use solid b/s with a ply top...

_________________
Francis Richer, Montréal
Les Guitares F&M Guitars
Top
 Profile  
 
calgarc
PostPosted: Sat Mar 05, 2011 1:38 pm 
Offline
Mahogany
Mahogany

Joined: Fri Aug 20, 2010 3:35 am
Posts: 69
First name: calgar
Last Name: c
City: Ottawa
Country: Canada
Focus: Build
Status: Amateur
Ti-Roux wrote:
Is that a joke or something like that..?

BTW, how do you know B/S are solid wood? Pretty much all industry guitar in a 25 to 1000$ range are laminate B/S and solid top. So it would be very surprising from a company to use solid b/s with a ply top...


i bought the guitar on used ottawa, the orignal guitar was around $260 i googled the model and checked out the numbers, the back and sides were solid and the top was laminate.
Top
 Profile  
 
Ti-Roux
PostPosted: Sun Mar 06, 2011 9:56 am 
Offline
Koa
Koa
User avatar

Joined: Wed Oct 21, 2009 7:46 pm
Posts: 950
First name: Francis
Last Name: Richer
City: Montréal
State: Québec
Zip/Postal Code: H4G 2Z2
Country: Canada
Focus: Build
Status: Semi-pro
What is the model, just for fun? (you know that you can't always companies on what they say...

_________________
Francis Richer, Montréal
Les Guitares F&M Guitars
Top
 Profile  
 
calgarc
PostPosted: Sun Mar 06, 2011 7:30 pm 
Offline
Mahogany
Mahogany

Joined: Fri Aug 20, 2010 3:35 am
Posts: 69
First name: calgar
Last Name: c
City: Ottawa
Country: Canada
Focus: Build
Status: Amateur
Ti-Roux wrote:
What is the model, just for fun? (you know that you can't always companies on what they say...


its a citation classical guitar made in montreal. i believe it was made in the seagull factory

Citation 605 Classical
Image
Image
Top
 Profile  
 
Ti-Roux
PostPosted: Sun Mar 06, 2011 10:38 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Oct 21, 2009 7:46 pm
Posts: 950
First name: Francis
Last Name: Richer
City: Montréal
State: Québec
Zip/Postal Code: H4G 2Z2
Country: Canada
Focus: Build
Status: Semi-pro
Looks like an old model that they don't make anymore. It's not seagull, cause they don't do nylon string, but it is probably one of the godin's name. Godin, Seagull, Richmond, Norman, Art & lutherie, Simon & Patrick, LaPatrie and SR amps are all divisions of Godin, and are build in Quebec. I know very well the companie since I met Robert Godin, visited the factory, and I have a lutherie teacher who is conceptor for Godin. Maybe yours is an old model, but I can say that all the tops that Godin use are solid Sitka or solid WRCedar. All the sides are ply, and most of the backs are too.

Just check out the edge of the soundboard by the soundhole. Do you see plies or not?

_________________
Francis Richer, Montréal
Les Guitares F&M Guitars
Top
 Profile  
 
calgarc
PostPosted: Sun Mar 06, 2011 11:21 pm 
Offline
Mahogany
Mahogany

Joined: Fri Aug 20, 2010 3:35 am
Posts: 69
First name: calgar
Last Name: c
City: Ottawa
Country: Canada
Focus: Build
Status: Amateur
Ti-Roux wrote:
Looks like an old model that they don't make anymore. It's not seagull, cause they don't do nylon string, but it is probably one of the godin's name. Godin, Seagull, Richmond, Norman, Art & lutherie, Simon & Patrick, LaPatrie and SR amps are all divisions of Godin, and are build in Quebec. I know very well the companie since I met Robert Godin, visited the factory, and I have a lutherie teacher who is conceptor for Godin. Maybe yours is an old model, but I can say that all the tops that Godin use are solid Sitka or solid WRCedar. All the sides are ply, and most of the backs are too.

Just check out the edge of the soundboard by the soundhole. Do you see plies or not?

i did check,thats how i figured it out, i spent lots of time on google and all i could find out was that it was made in montreal, possiblby by seagull and the B/S was solid, but i could be wrong. either way i only payed 30 bucks for it
Top
 Profile  
 
Ti-Roux
PostPosted: Mon Mar 07, 2011 10:43 am 
Offline
Koa
Koa
User avatar

Joined: Wed Oct 21, 2009 7:46 pm
Posts: 950
First name: Francis
Last Name: Richer
City: Montréal
State: Québec
Zip/Postal Code: H4G 2Z2
Country: Canada
Focus: Build
Status: Semi-pro
A trick to see if B/S are solid: Check out the back by the soundhole, find a defect, a special figure, a larger grain.. and check out if you see the same thing by the outside of the guitar. Same thing for the sides.

And it's not seagull. I told you they don't build nylong string, and never did, but it possibly can be built in the same factory, because as I said, all the godin's trademarks are under the same roof(s). Godin have his headquarters in montréal, but no factories.

_________________
Francis Richer, Montréal
Les Guitares F&M Guitars
Top
 Profile  
 
calgarc
PostPosted: Mon Mar 07, 2011 12:04 pm 
Offline
Mahogany
Mahogany

Joined: Fri Aug 20, 2010 3:35 am
Posts: 69
First name: calgar
Last Name: c
City: Ottawa
Country: Canada
Focus: Build
Status: Amateur
Ti-Roux wrote:
A trick to see if B/S are solid: Check out the back by the soundhole, find a defect, a special figure, a larger grain.. and check out if you see the same thing by the outside of the guitar. Same thing for the sides.

And it's not seagull. I told you they don't build nylong string, and never did, but it possibly can be built in the same factory, because as I said, all the godin's trademarks are under the same roof(s). Godin have his headquarters in montréal, but no factories.


i see :D thanks
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Board index » Kit Building 101 at the OLF!

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com