Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Nov 29, 2024 12:57 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: gluing in a bolt on neck
PostPosted: Sun Jun 27, 2010 9:27 pm 
Offline
Walnut
Walnut

Joined: Sat May 22, 2010 6:19 pm
Posts: 29
First name: Andy
Last Name: Schrider
City: Fort Myers
State: FL
Zip/Postal Code: 33913
Country: United States
Focus: Build
Status: Amateur
I bought a Warmoth style neck from Warmoth (the PRS looking model). The one I bought has a heel like a strat and is pre drilled to be a bolt on neck. I would really like to glue it in instead of bolting it on, but I'm not sure if that small of a heel will give it enough support without bolting it on. Any thoughts? Thanks!


Top
 Profile  
 
PostPosted: Sun Jun 27, 2010 11:09 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
I don't think the size of the heel will be the problem. If it's standard fender size it's 3" long, which should give you plenty of gluing surface, IMHO. Everyone likes the long tenon, but if you look at some guitars, for instance Gibby's LP JR, all the plans I've seen call for a 2 and 3/4" tenon, and they seem to hold up fine. The problem with gluing in a bolt on neck is that
A) There is no support for the tenon on the treble side(which may or may not be a problem, and
B)Unless you alter the body somehow, it'll look funny, and be obvious that it was meant to be a bolt on.
My opinion? There's nothing wrong with a bolt on neck. I'd bolt it together the way it was designed. MHO.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


Top
 Profile  
 
PostPosted: Sun Jun 27, 2010 11:29 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
I need to read your post closer. You did not say whether you were using a body designed for a bolt on neck or not. That was an assumption by me. Sorry. If you build a body dsigned around that neck, it should look and work fine. My current build has a 3" tenon that is the full width of the neck, set into the body and glued. Of course, the heel is 1.5" thick, so there's a little more surface area to glue, but the same principle.
Attachment:
DCFC0038.JPG

Attachment:
DCFC0048.JPG

I strung it up in the white, before finish. It's rock solid, and this is my first build, but I don't anticipate any problems.


You do not have the required permissions to view the files attached to this post.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


Top
 Profile  
 
PostPosted: Mon Jun 28, 2010 8:45 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed Jan 30, 2008 2:03 am
Posts: 198
Location: USA
First name: Brett
Last Name: Faust
City: Puyallup
State: WA
Zip/Postal Code: 98373
Country: USA
Focus: Build
Status: Professional
Image
Image

This is about 8 years old and rock solid.
It sounds great or so others who keep asking me to sell it to them say.
You must have a really tight fit to make this work and you only get one chance to get it right so if you go this way be thorough.
Best of luck, enjoy the build.

Another version
Image

_________________
How long is that in luthyears?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com