***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Nov 25, 2024 12:33 am


Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
Sheldon Dingwall
PostPosted: Wed Sep 09, 2009 12:21 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Mar 03, 2008 6:51 pm
Posts: 488
I've used the McFaddens Rosewood sealer and found the visual depth to be lacking. How is Isolante?

Is Chemcraft (now Akzo Nobel) a PIA to deal with? It sure seems like it from this end.
Top
 Profile  
 
joe white
PostPosted: Wed Sep 09, 2009 4:29 pm 
Offline
Koa
Koa

Joined: Sun Mar 09, 2008 8:08 pm
Posts: 878
Do you mean the clarity of the sealer? I have found the rosewood sealer to be extremely transparent and since so little is applied I don't understand how depth plays into this?

_________________
jw ( o)===:::
Top
 Profile  
 
Erik Hauri
PostPosted: Wed Sep 09, 2009 8:33 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 26, 2008 12:31 pm
Posts: 510
Location: Gaithersburg MD
First name: Erik
Last Name: Hauri
State: Maryland
Focus: Build
Status: Amateur
I think Sheldon is talking about chatoyance - or how 3D the grain appears when you apply the sealer.

_________________
The member formerly known as erikbojerik....
Top
 Profile  
 
Sheldon Dingwall
PostPosted: Wed Sep 09, 2009 9:15 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Mar 03, 2008 6:51 pm
Posts: 488
Erik Hauri wrote:
I think Sheldon is talking about chatoyance - or how 3D the grain appears when you apply the sealer.


What he said.
Top
 Profile  
 
joe white
PostPosted: Wed Sep 09, 2009 11:34 pm 
Offline
Koa
Koa

Joined: Sun Mar 09, 2008 8:08 pm
Posts: 878
Ohhhhh,, Magic Sealer?? idunno laughing6-hehe

Seriously, if the wood has any pop to it at all, the sealer will "wet" it enough to see what's going on in the grain. I would have to think that Isolante and Rosewood Sealer appear very similar once sprayed. The big advantage with Isolante is no scuffing and not having to wait overnight.

_________________
jw ( o)===:::
Top
 Profile  
 
Sheldon Dingwall
PostPosted: Thu Sep 10, 2009 10:09 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Mar 03, 2008 6:51 pm
Posts: 488
joe white wrote:
Ohhhhh,, Magic Sealer?? idunno laughing6-hehe

Seriously, if the wood has any pop to it at all, the sealer will "wet" it enough to see what's going on in the grain.


I haven't found that to be the case. The wash coat can make or break the depth (chatoyance - I've never liked that word) of the top coats.

To me, urethane wash coats have always looked like they lack depth. I haven't played with over-reducing which might be one solution, but might also cause solvent popping issues.

joe white wrote:
The big advantage with Isolante is no scuffing and not having to wait overnight.


That's "Magic" enough for me, which is why I'm curious about it. ;)
Top
 Profile  
 
joe white
PostPosted: Thu Sep 10, 2009 1:10 pm 
Offline
Koa
Koa

Joined: Sun Mar 09, 2008 8:08 pm
Posts: 878
That's "Magic" enough for me, which is why I'm curious about it. ;)[/quote]

Me too Sheldon, I have just been afraid to mix products (McF's-Chemcraft) Funny you mention over reduction. I actually under reduce the Rosewood sealer and only apply one coat. Could be why I haven't noticed the sealer distorting the image.

_________________
jw ( o)===:::
Top
 Profile  
 
LRegnier
PostPosted: Wed Sep 23, 2009 8:21 pm 
Offline
Mahogany
Mahogany

Joined: Tue Aug 05, 2008 12:30 am
Posts: 78
First name: Luc
Last Name: Regnier
City: Toronto
State: Ontario
Country: Canada
Focus: Build
Status: Amateur
Hi Sheldon,

Chemcraft was bought out by Akzo about two years ago.

Regards - Luc
Top
 Profile  
 
Sheldon Dingwall
PostPosted: Thu Sep 24, 2009 3:06 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Mar 03, 2008 6:51 pm
Posts: 488
Thanks Luc.

I called up Akzo a few weeks ago. I haven't heard back from them. In the mean time, I found a company that's relatively close that will custom blend PE to my specs. I'm testing a galon right now.
Top
 Profile  
 
Bob Garrish
PostPosted: Fri Sep 25, 2009 3:05 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional
Ask Mike Collins (the Selmer Mike Collins) about it: he uses the Chemcraft UV system end to end.

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 12 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com