Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 30, 2024 9:16 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 22 posts ] 
Author Message
 Post subject: New here...
PostPosted: Tue Feb 19, 2008 10:42 pm 
Offline
Walnut
Walnut

Joined: Tue Feb 19, 2008 10:37 pm
Posts: 5
Hi, i just became interested in building a guitar, but i have no experience/idea how to and was wondering if ne one could get me started with some tips/designs/tools that i will need etc... any help would be appreciated

thanks,
andy


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Tue Feb 19, 2008 10:52 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jun 10, 2005 9:51 am
Posts: 2148
Location: San Diego, CA
First name: Andy
Last Name: Zimmerman
City: San Diego
State: CA
Zip/Postal Code: 92103
Country: United States
Focus: Build
Welcome Andy from another Andy
The OLF is a great place. All levels of experience here.
Most recommend starting with a kit first to get a feel for the construction of a guitar.
Several of the OLF sponsors including John Hall, LMI and Stew Mac make nice kits.
Just ask questions and we will be glad to help

_________________
Andy Z.
http://www.lazydogguitars.com


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Tue Feb 19, 2008 10:54 pm 
Offline
Koa
Koa

Joined: Fri Jun 30, 2006 4:23 pm
Posts: 1694
Location: United States
First name: Lillian
Last Name: Fuller-Watson
State: WA
Country: USA
Focus: Build
Status: Amateur
Hi Andy and welcome to the forum.

Can you tell us a bit more? What is your previous woodworking experiences? How are you set tool wise? What are you interested in building. "Guitar" covers a lot of ground.

Tips huh? Well, start by reading all you can get your hands on. Go through the archives. Check out the Tutorial page. Bear in mind that we just did a major move and we are still unpacking, putting things back where they belong. So, check it out frequently over the next couple of months.

And remember, you can't build just one.

_________________
Aoibeann


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Tue Feb 19, 2008 11:16 pm 
Offline
Walnut
Walnut

Joined: Tue Feb 19, 2008 10:37 pm
Posts: 5
wow, thanks for the fast and help full responses, just one more question, could i have the links to those kits u mentioned?
To answer Aoibeann's questions. my previous woodworking experience is making a marshmallow roasting stick lol (aka none). i dont really have to many tools but i am willing to get them. and i am interested in building any acoustic guitar (nylon classical or dreadnought preferably) that would be easy to make, seeing that this will be my first, ive been playing since i was 10 and now 7 years later i just really want to build my own.


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Tue Feb 19, 2008 11:23 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jun 10, 2005 9:51 am
Posts: 2148
Location: San Diego, CA
First name: Andy
Last Name: Zimmerman
City: San Diego
State: CA
Zip/Postal Code: 92103
Country: United States
Focus: Build
Here are the kit links
http://www.stewmac.com/shop/Kits.html
http://www.lmii.com/
follow the kit wizard
http://www.bluescreekguitars.com/catalog/index.php?main_page=index&cPath=1&zenid=72e2a9c5f701035b9e67fffe3aec4dae

Many here have started from the above kits

_________________
Andy Z.
http://www.lazydogguitars.com


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Tue Feb 19, 2008 11:32 pm 
Offline
Walnut
Walnut

Joined: Tue Feb 19, 2008 10:37 pm
Posts: 5
hmmm...... i just looked at the kits and they are pretty expensive and im not sure i want to spend that kind of money on my first one, for fear of messing it up but i will consider the mandolin or ukulele from http://www.stewmac.com/shop/Kits.html

if there r ne other cheaper solutions they would be much appreciated

thanks,
andy


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Tue Feb 19, 2008 11:36 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
I think, "easy to make" would not be part of the lexicon for guitar building. Kits will be easier than starting from scratch, but will take meticulous detail work, and careful following of plans. Consider the help you figure you may need before you are done too. The LMI Kits come with a CD or DVD of building a guitar, and that is very helpful. John Hall's kits come with access to his excellent advice and his ability to help you through rough spots by answering your questions on construction, and giving you pointers on how to proceed. Or, if you really want to punish yourself, you can buy wood, and build from scratch. However, unless you were making very intricate marshmallow roasting sticks, that might not be your best direction to take. Good luck on whatever you decide to do, and welcome to the OLF. You can learn a ton there. Check out the archives and the Tutorial page.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Wed Feb 20, 2008 1:09 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
First off Andy, welcome here.

There really is no such thing as an inexpensive first guitar. You could choose inexpensive woods, but unless you have the skill to cut some of your own back and side sets from lumber yard woods it honestly is less expensive to buy a serviced kit to get going.

LMI has one of, if not the lest expensive kit out there at $290 but that doesn't include tuners.

The first thing I did when I wanted to build my first guitar was to pick up Guitarmaking: Tradition & Technology and honestly I read it cover to cover at least twice before I even bought wood or parts. Now, it's considered to be slightly outdated but you can get more up to date details on what to do here. What reading the book will do is give you a really good idea of what it takes to build your first guitar. The book also focus' more on hand tools which is good because they are generally less expensive than power tools.

Now just so you know, I think a first guitar will cost you roughly $1000 once you've bought or rented some tools or shop time and bought your first kit. I don't want to discourage you rather give you a good idea of what you're getting yourself into financially.

Don't be afraid to ask questions, there are a lot of people here who like to help.

Welcome again.

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Wed Feb 20, 2008 1:16 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Dec 20, 2005 7:46 am
Posts: 2227
Location: Canada
Andy, welcome to the OLF!

I'm with Waddy. I'm afraid there's no quick and painless way to build a guitar. If you find kits are expensive, you can always try to source and buy the woods and sets yourself, but by the time you find everything and bring them all down to size to work with (thicknessing), it might prove easier to just buy a nice mahogany kit where most of the machining is done for you.

I don't know how you're set up for tools, but I imagine you'll have to thickness everything by hand plane. Not that there's anything wrong with this as I've done it many times before, but the romanticism of the act quickly wore off for me.

Regardless, you'll need to tool up and build at least a few jigs. I'd recommend the very first investment you make is buying 'Guitar Making - Tradition and Technology' by Cumpiano/Nathelson. Although some of the methods and techniques are dated, you'll get a very good idea of what you're getting yourself into. At the very least, it's the best primer on how to get going with minimal power tools.

Hope this helps,

_________________
I'd like to be able to prove, just for once, that money wouldn't make me happy...


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Wed Feb 20, 2008 11:14 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13391
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Welcome to the OLF Andy! [clap] [clap] [clap] [clap]

One other suggestion for you is if you use the link for the Stew-Mac kits, click on the d*eadnought kit, you will see a free-for-download PDF file of the kit instructions. This will give you a very good idea of what is involved in assembling a guitar kit and it includes a recommended tool list too. Be advised though that the recommended tools are not all needed.....

Welcome aboard.


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Wed Feb 20, 2008 1:51 pm 
Offline
Walnut
Walnut

Joined: Wed Feb 20, 2008 1:35 pm
Posts: 2
Greetings Andy -

In order to get your feet/fingers wet, you might want to try one of the dulcimer kits from Stew Mac. It's a little cheaper and it will give you the opportunity to do some basics without incurring huge tool expenses, etc. I found it to be a great starting point when I started out a while back.

By the way everyone - I'm new to the forum as well. Been playing around with building and repair (mostly repair) for the last several years and am looking to do more building as time allows. I guess you'd call me a hobbyist - for now, anyway! This looks like it'll be a great resource and I hope I can contribute to the knowledge base . .


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Wed Feb 20, 2008 2:06 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jun 17, 2006 3:48 am
Posts: 2094
Welcome!!

I would say that starting with a kit is a great way to get into luthiery. That option wasn't there in the "olden days" and people jumped straight into the deep end!!

But again, I would echo the sentiments of everyone here; for someone who has minimal woodworking experienc,e a kit is the best way to go.


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Wed Feb 20, 2008 4:08 pm 
Thanks everybody for all the suggestions and help, i was searching through the sponsors websites and i found that RC Tonewoods is located about 10 mins. from my house so ill also be contacting them to see if they cant help me get started with supplies and such.

Thanks again,
Andy


Top
  
 
 Post subject: Re: New here...
PostPosted: Wed Feb 20, 2008 4:14 pm 
Offline
Koa
Koa

Joined: Mon Sep 04, 2006 10:55 pm
Posts: 698
Location: Australia
That'll be a great start Andy.

You won't find a better man than Bob Cefalu to point you in the right direction.

Bob

_________________

------------------------------------------------------
Bob Connor
Geelong, Australia


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Wed Feb 20, 2008 7:48 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Dec 20, 2005 7:46 am
Posts: 2227
Location: Canada
Guest wrote:
Thanks everybody for all the suggestions and help, i was searching through the sponsors websites and i found that RC Tonewoods is located about 10 mins. from my house so ill also be contacting them to see if they cant help me get started with supplies and such.

Thanks again,
Andy


Oh my!!! I'm soooo happy I don't live 10 minutes away from the Zootman! After having me charged with tresspassing, he'd have to put a restraining order on me eventually!!! :lol:

_________________
I'd like to be able to prove, just for once, that money wouldn't make me happy...


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Wed Feb 20, 2008 8:26 pm 
wow u guys know the "Zootman"?, not that i am impressed or ne thing.... jk. But seriously is he nice/get's along with kids? and do u think he would set me up with a package deal, and help me get going? or should i just give the man a call my self?


Thanks,
Andy


Top
  
 
 Post subject: Re: New here...
PostPosted: Wed Feb 20, 2008 8:35 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jan 24, 2008 8:01 am
Posts: 1399
Location: Houston, TX
First name: Chuck
Last Name: Hutchison
City: Houston
State: Texas
Country: United States
Focus: Build
Status: Amateur
Welcome Andy,
I know what you mean about not affording to dish out a wad of cash for a box full of wood that you'll have to saw and glue together. You should try it.
Check out this cat building a guitar on YouTube. He uses tools that most folks already have hangin' out in the garage. Whatever you decide to do, I hope your first turns out to be fabulous. You have the most important tool you need right now...Desire. You could have a whole shop full of tools and a hundred chisels, but if you don't have the desire to build what good are they? Go make that guitar.....you know you want too!


_________________
"After forty-nine years of violin building, I have decided that the search for a varnish is similar to the fox hunt. The fun is in the hunt."
Jack Batts Maker and Repairer of Fine Violins


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Thu Feb 28, 2008 12:56 am 
Offline
Walnut
Walnut

Joined: Wed Feb 27, 2008 2:55 am
Posts: 10
Location: 30 Miles East of Disneyland
Hey Andy,
I built my first uke from a Stew-Mac kit. Went real well. You may have some stumbling blocks but nothing forum folks can't help with.

Lefty


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Thu Feb 28, 2008 2:29 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
Andy, I met Bob Cefalu aka The Zootman last summer in Toronto (I'm from BC) and let me honestly say, you will not find a more helpful and caring person who is also very excited about guitars than Bob. He loves people and he really is great to just hang out with.

Al's right, If I lived 10 mins from Bob's place, he would have to either hire me or set my up with some concrete shoes and chuck me in the river (I hope he'd hire me).

I can't say for sure, but my guess is Bob would most certainly set you up with a great "kit" and he may even rent you some space in his new shop to work on your project (who knows, this may just get him building again bliss which would be really great)

Andy, honestly look him up, he's Da Man you need to see. He'll make you an offer you can't refuse laughing6-hehe

Just some inside jokes, don't mind me :D

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Thu Feb 28, 2008 5:11 pm 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
Andy,

If you think about it the price of a quality kit renders a guitar worth many times it cost. you can't get into this craft for less frankly.

Now if you do not mind a ply body kit Grizzly.com has a classical and steel string kit. but frankly you will learn near nothing from them as they are an assembly kit only and the boy is pretty much made.

you might try a mandolin kit for less money.

The truth is to buy all the materials and consumables for a solid wood guitar you would be looking at around $400-600 depending on the woods and consumables you buy. with time and patients the guitar the quality kit will produce would be in the 1K-3k value range when completed.

Sad to tell you this can in no way become a inexpensive hobby to get into. Once you are hooked the cost of the wood and parts will just become a drop in the bucket compared to the things you will find yourself occurring. But like my wife said in the vary beginning of my addiction to this craft, "at least I know your not in the bars" laughing6-hehe


Top
 Profile  
 
 Post subject: Re: New here...
PostPosted: Fri Feb 29, 2008 4:37 am 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 23, 2008 8:05 pm
Posts: 1567
Location: San Jose, CA
First name: Dave
Last Name: Fifield
City: San Jose
State: CA
Zip/Postal Code: 95124
Country: USA
Focus: Build
Status: Amateur
Back in the jolly old UK (which is where I hail from originally 8-) ) the northerners have a saying:

"You don't get 'ought for nought"

(where 'ought is pronounced owt, and nought is pronounced nowt)

It means "you don't get anything for nothing", of course.... duh

Andy, I don't want to appear to be negative, but like Michael and the others said, there's a certain minimum number of shekels that you're going to need for tools and supplies in order to build a basic guitar yourself. Maybe you need to wait until you're earning, or perhaps find a college course in lutherie?

Or, perhaps we could try appealing to OLF'ers for help......guys, what do you say, would Lance/Brock go for a "Sponsor-a-Newbie" idea where those that want to can pitch in with a small something to help (e.g. cash/wood/tools/supplies)? The whole program could be kept on the down-low to keep it from becoming a circus. Obviously, it would need to be better thought out than this, but it's a germ of an idea that we (you) might like to consider taking action on....

Dave F.

_________________
Cambrian Guitars

"There goes Mister Tic-Tac out the back with some bric-brac from the knick-knack rack"


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 22 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com