Official Luthiers Forum!

Jim,

I think I can find two more.

Shane

_________________
Canada

I'll take 10 of the double action gotoh rods @ $12.60/ea

14 fret

Thanks Shane!

_________________
Reguards,

Ken H

Shane,

I will take 1 large set for $50.00 and 2 Weissenborn bindings at $6.75 ea. If I could add 6" of your bracing it would be helpful. Just PM me with the details and I will send payment. I will be out of town until Monday and will take care of it then or when you contact me.

Thanks Shane

Philip

_________________
aka konacat

If you think my playing is bad you should hear me sing!
Practice breeds confidence and confidence breeds competence. Unfortunately, I'm stuck in practice.

Shane,

If any of the personal stash is left, I'll take any one (1) set that is 8.5" per plate.  A thin set is fine, since I'll ask you to sand it for me to approx .120" and I will finish it by hand.  Just add it to my growing pile and no rush given all your orders these days.....

Thanks,

Laurie

_________________
____________________________________
Time you enjoy wasting is not wasted time.

[QUOTE=Shane Neifer]

Hey Todd,

I just fondled a piece for you. It is medium on the heavy side, a bit lighter than EIR, it is very stiff and has a moderate pitched tap tone. I am actually looking forward to trying out a set in the future.

Shane[/QUOTE]

Thanks for getting back to me on that, Shane. It sounds intriguing. My quick web search suggests that this is likely Grevillea robusta, with properties very similar to American sycamore (which the QS wood obviously looks like). Native to Australia, imported to and now grown extensively in India. If you bring some of this to the GAL convention next summer, I'll check it out, but I'll pass on buying any just now.

Thanks again.

_________________
Todd Rose
Ithaca, NY

https://www.dreamingrosesecobnb.com/todds-art-music

https://www.facebook.com/ToddRoseGuitars/

[QUOTE=Todd Rose] [QUOTE=Shane Neifer]

Hey Todd,

I just fondled a piece for you. It is medium on the heavy side, a bit lighter than EIR, it is very stiff and has a moderate pitched tap tone. I am actually looking forward to trying out a set in the future.

Shane[/QUOTE]

Thanks for getting back to me on that, Shane. It sounds intriguing. My quick web search suggests that this is likely Grevillea robusta, with properties very similar to American sycamore (which the QS wood obviously looks like). Native to Australia, imported to and now grown extensively in India. If you bring some of this to the GAL convention next summer, I'll check it out, but I'll pass on buying any just now.

Thanks again. [/QUOTE]

Todd,

That is what I figured it might have been also from my web search but I can't confirm unless I contacted my supplier....sometimes even then correct ID is still suspect.

Anyway, I may have more by the time GAL arrives, if I do I will bring some down.

Thanks

Shane

_________________
Canada

Shane,

I'll take the SEP700 tuners and these if available -

1 LARGE Lutz spruce top 10.5 x 24 - $50
1 Indian laurel set - . $80 each - you can just pick a nice one similar to the picture.

I'll send you a PM requesting a total with shipping.

Thanks,

Greg

_________________
GregH
Fot Wuth

Greg I got your order thanks! The tuners are for sloy head guitars just to make sure that you were aware of that.

For all, the Gotoh SEP770 tuners are still available as well, they are for slot head guitars.

Thanks

Shane

_________________
Canada

Shane,

Dog gone it, I cannot resist temptation. I'll take the SEP770 tuners too, but I thought Paul had already asked for those.

Greg

_________________
GregH
Fot Wuth

I would like three sets of the Lutz thin tops 8.5"x22" for $40 each, please.

[QUOTE=GregH] Shane,Dog gone it, I cannot resist temptation. I'll take the SEP770 tuners too, but I thought Paul had already asked for those.Greg
[/QUOTE]

Hey Greg, Paul did ask for them but I forgot to mention taht these were slot head tuners so I am getting him a set just like it but with posts for a paddle head.

So I will mark both of these sets as yers!

Barry, I have you marked down for the 3 sets. Thanks

Shane

_________________
Canada

_________________
Dean

Shane - not sure if you saw it earlier......am I down for a Lutz top from your stash? 

 

_________________
____________________________________
Time you enjoy wasting is not wasted time.

You bet Laurie and I will get you a pic of that other one we have been talking about also.

Thanks

Shane


Dean, I have you down for 5 Indian Laurel sets, Thanks!.....Just kidding!! Thanks though for browsing!

Shane...again.

_________________
Canada

Shane -

I'm looking for 3 sets of the 8.5 x 22 if you have any left.  Either the $42 sets or the $40 thin edge sets.

Thanks

_________________
Doug Mills
Chicago, Illinois

Hey Doug, you have the last 3 sets of the thin sets.

Thanks

Shane

_________________
Canada

May as well add a set of EIR (sanded please) 8.5" plates with a nice colour match for $110....

But that's it for me....

Laurie

 

_________________
____________________________________
Time you enjoy wasting is not wasted time.

These headplates are at least 3.375 x 8.375 x .160 rough sawn. They are bit smaller than the ones I advertise for $8.75 on my website. They are also interestingly striped. So $7 each. I have 40 of them. If someone wants them all, $260. I sanded one side of these three to show the colour and silk on the well quartered ones.


Thanks
Shane

_________________
Canada

I am wrapping packages like crazy!! I anticipate that most will ship on Wednesday. If you have dealt with me before then I likely still have your address, if you haven't please be sure to PM your address to me. Once I know the shipping charges I will forward the totals to you.

Thanks again, this has been a fun event!

Shane

_________________
Canada

Hey Shane, do you have any EIR FB's and bridge blanks?

I'd take two of the head plates if you have 2 fb's and bridge blanks to go with them.

I'd like the fb's as wide as possible to get offcuts for fb binding.

Just let me know in a pm with the total.

Thanks

Rod

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson

Hey Rod,

Those Headplates are ebony. I do have ebony and EIR headplates, fretboards and bridge blanks.....I have LOTS of bridge blanks!!

_________________
Canada

Shane,

It's your own fault if you don't get everything packed and shipped. You keep offering more.

Please add 3 ebony headplates and 3 ebony bridge blanks to my order.

Thank you

_________________
GregH
Fot Wuth

Shane, are the ebony fb's and bridge blanks the same as the head plates?

If so, pm me the cost on the fb's and bb's I'll let you know if you should add them to the order. (most likly )

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson

Hi shane.

If you are willing to ship to the uk i would like 5 black fibre sheets 3 red and
3 blue.

That is if you still have some left.

pm me if you are will and how much shipping will be.

Thanks,
joel.

[QUOTE=joelThompson] Hi shane.

If you are willing to ship to the uk i would like 5 black fibre sheets 3 red and
3 blue.

That is if you still have some left.

pm me if you are will and how much shipping will be.

Thanks,
joel.[/QUOTE]

Hey Joel,

I will get the shipping price for you and PM it in the next day or so.

Thanks

Shane

_________________
Canada