Official Luthiers Forum! • View topic

Board index » Forum Archive

All times are UTC - 5 hours

Spanish cedar

Page 1 of 1

[ 5 posts ]

Print view

Previous topic | Next topic

Author

Message

Greenman

Post subject:

Posted: Wed Oct 17, 2007 11:31 am

Cocobolo

Joined: Sat Apr 07, 2007 5:07 am
Posts: 161
Location: Ulster Park, New York
First name: Bill
Last Name: Sterling
City: Ulster Park
State: New York
Zip/Postal Code: 12487
Country: United States
Focus: Build
Status: Amateur

I went to a architectural woodworking place to beg for some Mahogany scraps and they had a little Mahogany which I bought but they had just finished a job with Spanish cedar and had a pile about 3' square and about 4' high that is going to be burned for heat latter. I rescued a few pieces but I think I am going to make and offer on the whole stack if the price is right. Currently I make steelstrings. I know classical necks are made with it. Can you make steel string necks with it? Being that the future of Honduran Mahogany is not known what are the alternatives to it. Alot of the scraps are 3" thick. So what can be made from it. Tailblocks, kerfing, bracing,Thanks for your input I hate to see wood like that go to waste and it smells nice to. P.S. Can a steelstring neck be reinforced with graphite strips like a classical and have a trussrod to.

_________________
Mistakes are mandatory-learning from them is optional. http://www.opensourceluthiersupply.com

Top

WaddyThomson

Post subject:

Posted: Wed Oct 17, 2007 11:43 am

Contributing Member

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro

If you buy it, there is always a Swap Meet coming up, even if you can't use it. It is good for Kerfed Linings, necks, bracing, solid linings, etc., if they have enough good pieces.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars

Top

JimWomack

Post subject:

Posted: Thu Oct 18, 2007 12:54 am

Contributing Member

Joined: Sun May 13, 2007 10:28 pm
Posts: 404
Location: Clermont, FL
Focus: Build

[QUOTE=Greenman]Can you make steel string necks with it? [/QUOTE]

Martin has in the past. I have a S. Cedar Martin neck I bought a few years ago to use on a 12 fretter I never got around to finishing.

_________________
Jim Womack

"Be thankful we're not getting all the government we're paying for. "
Will Rogers

Top

Greenman

Post subject:

Posted: Thu Oct 18, 2007 5:28 am

Cocobolo

Picked it up today and have a van load of it. I am going to give some to a couple local luthiers and save the rest. I have a bunch of small wedge shaped picks I will have to find a use for. Not really quite big enough for a new block on a classical maybe on a steel string? I have to figure out how to post photos and I can show a piece.

_________________
Mistakes are mandatory-learning from them is optional. http://www.opensourceluthiersupply.com

Top

grumpy

Post subject:

Posted: Thu Oct 18, 2007 12:11 pm

Koa

Joined: Wed Aug 22, 2007 11:58 am
Posts: 1667

I often use Spanish Cedar for a steel string guitar neck, with no added CF or anything. Just a plain 'ol Martin style truss rod, at most. It holds up perfectly fine.

Watch out for the dust! It can bite you back....

Top

Page 1 of 1

[ 5 posts ]

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 21 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: