***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 3:28 pm


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
John Elshaw
 Post subject:
PostPosted: Thu Sep 20, 2007 2:20 am 
Offline
Koa
Koa
User avatar

Joined: Mon Jan 03, 2005 2:40 am
Posts: 993
Location: United States
I'm refinishing an old 1965 Rickenbacker and so far it's going pretty good. I'm using all the aerosol products from StewMac as this is my first lacquer job and I normally FP all my guitars. So far I've sprayed the sealer followed by the black lacquer and put my first four coats of clear gloss on. Would you guys recommend level sanding at this point and then spray the remaining clear coats on, or should I spray the rest and level sand after everything has cured? I've heard people do it both ways but would like to know the reasons why as well as what will work better with these products.

Thanks!

John
Top
 Profile  
 
LanceK
 Post subject:
PostPosted: Thu Sep 20, 2007 2:43 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8551
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
John, I have used thats same stuff, and yes, shoot for day (several coats) and level sand between. Then reshoot. Level again, once you have no pin holes, give another coat or two and then finish it out.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com
Top
 Profile  
 
JJ Donohue
 Post subject:
PostPosted: Thu Sep 20, 2007 2:44 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
John...I typically have shot 5-6 coats, wait 2 weeks and level sand. Shoot the remaining 4-5 thin coats, wait 3-4 weeks and final wet sand to 12,000 grit and buff. It simplified the process for me and got good results. The longer you can wait before sanding, the more effective the sanding seems to be.

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com
Top
 Profile  
 
LanceK
 Post subject:
PostPosted: Thu Sep 20, 2007 2:44 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8551
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Follow up,after you spray your last few coats, you do want to let it cure before finishing it out.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com
Top
 Profile  
 
Dave Stewart
 Post subject:
PostPosted: Thu Sep 20, 2007 4:01 am 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 31, 2007 7:17 am
Posts: 1383
Location: Canada
Is the same true for waterbased spray lacquer?

_________________
Dave
Milton, ON
Top
 Profile  
 
JJ Donohue
 Post subject:
PostPosted: Thu Sep 20, 2007 5:26 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
Dave...I followed the same protocol for KTM-9. Likewise...the longer you wait the easier and more effective the sanding will be.

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com
Top
 Profile  
 
John Elshaw
 Post subject:
PostPosted: Thu Sep 20, 2007 7:31 am 
Offline
Koa
Koa
User avatar

Joined: Mon Jan 03, 2005 2:40 am
Posts: 993
Location: United States
Thanks for all the great info fellas! It seems like I'm off to a good start. I had a total of about 6 coats on and I just finished level sanding. I only broke through one little spot along the edge so I'm pretty happy about that. I'll spray three more coats, wait, level, three more and call it done for about a month and hope it cures nice and hard. I'l post some before and after pics of the guitar, but I'm guessing it will be a pretty dramatic difference.

Cheers!

John
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 39 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com