Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Dec 02, 2024 6:29 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 24 posts ] 
Author Message
 Post subject:
PostPosted: Thu Aug 30, 2007 11:06 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
Well, after a good bit of juggling this week between a truck repair gone horribly wrong and this cabinet, I was able to finish this amp. It is a 35 watt Dumble inspired head. The baffle is koa from Volcano, and I used a fretboard blank for the ebony faceplate (this isn't something I would do again---the ebony is extremely fragile after being thinned to .040".

It has some cool features. The first toggle switch is a bright switch that adds life to humbuckers, the middle toggle switches to overdrive, and the third lifts the tone controls out of the circuit which turned out to be my preferred sound. My friend Dave and I plugged in a guitar at church after taking these pics and were able to nail this sound. Unfortunately, I was hoping for something else in the cleans. The cleans are rather mid-focused, and I wanted something warm and full to compliment the Voxy amp I did last year. I was hoping for a blackface Fender sound and amp surprised since the tone circuits are so similar.

It was really difficult to photograph because we didn't think of bringing a tripod. After a few shots, we gave up on style and just tried to get steady ones.





Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 30, 2007 11:29 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
That's a beauty, James.  I haven't seen too many amps with nice woods on them. I think the only one was an Alessandro, Red Bone Special with a maple case and a birdseye maple face plate, that my son bought.  I know there are others out there.  This one, though, is great looking, but also functional with the Tolex box and just the nice Zoot on the face.

Good job.


_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 30, 2007 11:56 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8551
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Holy Smokes! That is sweet!

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 30, 2007 12:08 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
Thanks guys. It actually looks so much better than the pics really show,
and I wish I had a camcorder so I could make some video clips. The
sound is SO defined. It's awesome.    


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 30, 2007 1:28 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Sep 08, 2006 2:18 am
Posts: 216
Location: Alabama
drrrrrrrrrrroooooooooooooooooooooooooollllllllllllllllllllll llllll


OH MY THAT IS AWESOME!

_________________
nay

My blogs
Hand Made Gutar
Woodworker++


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 30, 2007 2:08 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
Thanks, Nathan.

Chris, it really depends on the amp. Some are pretty slim on the inside,
and others like this have more going on. I'm not sure what this one cost,
but I know I could've done it less expensively. I used some really nice
resistors on this one and upgraded the iron in the transformers. Both of
those were in the name of increasing it's definition.

I didn't know anything when I started. I had a layout, found
turretboards.com and tubesandmore.com (each are newbie friendly), and
ordered what I needed. It was like connecting the dots. I was talking with
John Mayes one night and he mentioned the 18 Watt he was building. I'd
been wanting to get back into guitar and decided to go for it. I actually
know quite a bit now and don't want to build another amp for a while. I
would suggest getting The Guitar Amp Handbook, by David Hunter if
you'd like to start developing an understanding of what's going on inside.
If you go to trinityamps.com, Stephen has some great kits available and
otherwise makes his layouts available for free on the message board.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 30, 2007 2:11 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Mar 14, 2006 4:08 pm
Posts: 1018
Location: Denver, Colorado
Very cool James. Looks great!

_________________
Mike

"The Dude abides. I don't know about you but I take comfort in that. It's good knowin' he's out there. The Dude. Takin' 'er easy for all us sinners. Shoosh." The Stranger


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 30, 2007 3:51 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas

_________________
http://www.dickeyguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 30, 2007 4:59 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway
Hi James, cool amp!
A couple of questions: What happens when you hit the overdrive toggle switch, some sort of input gain boost (this is a single channel amp right, so I assume there is no channel switching?) Do you have a foot switch for these controls? What type of speaker(s) and cabinet do you run with it?

_________________
Rian Gitar og Mandolin


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 31, 2007 3:00 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
Thanks, Arnt. The toggle switches cut things out of the signal or
introduce them back in. The gain toggle just cuts a gain stage out of the
signal when off. I could've built in channel switching but decided not to.

I actually ordered a few speakers, all 12". One was a Celestion G-1265,
one was a Two-Rock 12-65, and the thirds as a 50 watt Weber Bluedog I
already had. I've since sold them all, actually. Believe it or not, yesterday
we were playing through a 15" JBL eon monitor that was in the church.
I'm actually selling the amp so I didn't keep the speakers. I ran into some
overspending this summer.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 31, 2007 3:03 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jun 17, 2006 3:48 am
Posts: 2094
That is an amazing Amp!


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 31, 2007 4:40 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jun 13, 2005 6:53 am
Posts: 2104
Location: Toronto, Ontario, Canada
First name: Anthony
Last Name: Zlahtic
City: Toronto
Country: Canada
Focus: Build
Status: Amateur
Dang James - but that sure is nice. Darn it, now I want one!

Though know it ain't gonna happen as I struggled with wiring a switch on my homebrew thickness sander and struggled with wiring in the light bulbs on my first Foxbender.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 31, 2007 5:13 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
Thanks, you two! Anthony, I might get confused with those things too,
but I had a roadmap for this. Wiring the tubes takes a little acrobatics,
but I bet you could do it.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 31, 2007 8:45 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
Yeah, you can do it if you have a good set of instructions.  I once built a stereo tube amp from a kit.  It was great.  25W per channel, nice preamp stage and all that.  Worked great for years.  Probably still would If the tubes didn't cost like $70 -- 80 each, and weren't so hard to find.  I can't remember exactly, but they were Mil Spec tubes something like 3884's.  James is right about the standing on your head thing while wiring tube sockets.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 31, 2007 9:37 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Jun 22, 2005 10:11 am
Posts: 2761
Location: Tampa Bay
First name: Dave
Last Name: Anderson
City: Clearwater
State: Florida
Zip/Postal Code: 33755
Country: United States
Thats beeeyu tee full James! Great job building it.

_________________
Anderson Guitars
Clearwater,Fl. 33755


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 31, 2007 10:41 am 
Offline
Koa
Koa

Joined: Tue Jul 04, 2006 3:24 am
Posts: 744
Location: United States
James...very nice job!

_________________
Brad
Avon, OH


Top
 Profile  
 
 Post subject:
PostPosted: Sat Sep 01, 2007 9:00 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Jan 05, 2005 6:25 pm
Posts: 2749
Location: Netherlands
Y'know, despite my love for my 60 watt rivera, it is just a big, ugly hunk of 80's rack gear, and that's just so, so much prettier. I'm seriously going to have to look up those websites and ponder a nice little low-watt (who really needs 60 watts, right) amp.

Very, very nice work!


Top
 Profile  
 
 Post subject:
PostPosted: Sat Sep 01, 2007 10:07 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
   

I'm totally happy to lend support to anyone who wants to explore these.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Sep 01, 2007 4:29 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
thats sick!!!

_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Top
 Profile  
 
 Post subject:
PostPosted: Sat Sep 01, 2007 4:30 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Oct 06, 2005 1:05 pm
Posts: 3350
Location: Bakersville, NC
Focus: Build
Status: Professional
[QUOTE=peterm] thats sick!!! [/QUOTE]
I mean that in a good way!


_________________
Peter M.
Cornerstone Guitars
http://www.cornerstoneukes.com


Top
 Profile  
 
 Post subject:
PostPosted: Sun Sep 02, 2007 2:59 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Dec 20, 2005 7:46 am
Posts: 2227
Location: Canada
Awesome James, that is truly spectacular!

_________________
I'd like to be able to prove, just for once, that money wouldn't make me happy...


Top
 Profile  
 
 Post subject:
PostPosted: Sun Sep 02, 2007 3:47 am 
Offline
Koa
Koa

Joined: Fri Jun 30, 2006 4:23 pm
Posts: 1694
Location: United States
First name: Lillian
Last Name: Fuller-Watson
State: WA
Country: USA
Focus: Build
Status: Amateur
James, I'm sorry you have to sell it off. It is beautiful. I hope you get more than enough to cover your expenses. Now that you've done it, you can always do it again, or not.

_________________
Aoibeann


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 24 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 63 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com