***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Dec 12, 2024 12:52 pm


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 2 of 2
  [ 34 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
John K
 Post subject:
PostPosted: Fri Jul 20, 2007 10:10 pm 
Offline
Koa
Koa

Joined: Tue Mar 14, 2006 11:42 pm
Posts: 565
Location: United States
I like that guitar Ringo!   


Top
 Profile  
 
Marc
 Post subject:
PostPosted: Fri Jul 20, 2007 11:38 pm 
Offline
Koa
Koa

Joined: Tue Mar 07, 2006 12:10 am
Posts: 606
Location: United States
Very nice guitar, nice clean work. It's nice to see inexpensive woods crafted into a fine instrument.

I really enjoyed your playing too. The sound is great, you're clearly an accomplished guitar-maker and player.
Top
 Profile  
 
CraigSz
 Post subject:
PostPosted: Fri Jul 20, 2007 11:39 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed May 30, 2007 4:29 pm
Posts: 188
Location: Australia
Focus: Build
Status: Amateur

That sure is a great sounding guitar Ringo. Can you tell me how you prepared the guitar to get such a fabulous finish?


Regards


Craig
Top
 Profile  
 
GregG
 Post subject:
PostPosted: Fri Jul 20, 2007 11:46 pm 
Offline
Koa
Koa

Joined: Fri Sep 30, 2005 10:33 pm
Posts: 954
Location: United States
That sounds great Ringo....what was your recording set-up?

Greg

_________________
Gwaltney Guitars
Top
 Profile  
 
James Ringelspaugh
 Post subject:
PostPosted: Sat Jul 21, 2007 2:42 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jan 08, 2007 3:47 pm
Posts: 1213
Location: Raleigh, NC
First name: Ringo
Craig: after sanding to 320 grit, I fill all the pores with system 3 epoxy. On this guitar, everything except the top and fingerboard got epoxied. The epoxy not only fills the pores but also gives a nice 'wet' look to the wood.

Greg: it is a very simple recording setup, just two mics about two feet in front of the guitar a few feet apart. I fiddled with their placement until the sound in the headphones was as close as I could come to the natural sound of the unmiked guitar. This ended up being one mic pointed at about the middle of the fretboard, one pointed at the soundboard behind the bridge. As for the gear, it is pretty entry-level stuff, at least as far as stereo mics go. The mics are Rode NT5's, a matched stereo pair, and those are plugged straight into a Lexicon Omega to my laptop.


Top
 Profile  
 
Kent Chasson
 Post subject:
PostPosted: Sat Jul 21, 2007 4:15 am 
Offline
Koa
Koa
User avatar

Joined: Fri Mar 23, 2007 9:56 am
Posts: 1271

Hey Ringo, looking good!


Glad to hear you like the Wenge.  I got a couple of boards a few weeks ago


_________________
http://www.chassonguitars.com
Top
 Profile  
 
CraigSz
 Post subject:
PostPosted: Sat Jul 21, 2007 8:04 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed May 30, 2007 4:29 pm
Posts: 188
Location: Australia
Focus: Build
Status: Amateur

Thanks Ringo . So with the top you just sanded to 320 then sprayed with KTM-9? By the way that is the best AA top I have ever seen.


Craig.
Top
 Profile  
 
James Ringelspaugh
 Post subject:
PostPosted: Sun Jul 22, 2007 3:07 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jan 08, 2007 3:47 pm
Posts: 1213
Location: Raleigh, NC
First name: Ringo
^ Yes Craig I just spray KTM-9 over the bare spruce.

I agree it is a very nice AA top; I believe the grading is mostly cosmetic and in fact I like some of the streaking that I guess sometimes downgrades a top. I went through about a hundred AA tops and only chose two... this was one of them. It really underscores the notion that that no matter how reputable and reliable the source, there is no substitute for getting your hands on the wood when choosing a board.


Top
 Profile  
 
Ken Franklin
 Post subject:
PostPosted: Sun Jul 22, 2007 5:44 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Aug 25, 2005 4:49 pm
Posts: 1209
Location: Ukiah, CA
As to volume, you might find that once you intonate the saddle you could get more.

_________________
Ken Franklin
clumsy yet persistent
https://www.kenfranklinukulele.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 34 posts ]  Go to page Previous  1, 2

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 19 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com