***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Dec 02, 2024 4:03 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 2 of 2
  [ 30 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
Haans
 Post subject: Re: Side dot jig....
PostPosted: Mon Apr 02, 2018 4:44 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
bcombs510 wrote:
Haans wrote:
Something about "over-jigging" never did appeal to me.


Agreed, Hans. My wife continually says “it’s supposed to be handmade” to get me off of obsessing over ridiculous details that no-one cares about in the end. :)

I spent some time recently thinking about what gets the most eye ball time on a guitar. Once the initial infatuation is over and the player stops marveling at the soundboard, rosette, inlays, etc... what are they stuck looking at? The side dots, side sound port (if there is one), the binding and purfling, etc... What else?

For me, with the side dots... a screw up is such a tremendous amount of work to fix for such a little process. I’m not confident like you folks that I won’t blow it. ;)


I like your wife's thinking. I'm probably one of the only ones around here that thinks like that too. Most are too preoccupied with razor sharp perfection like Marvin, Collings, Olsen, etc.
I'm stuck in 1915 with Orville. A little "wobble" here or there is not the end of the world.
Here's an F5C with the tortoise dots touching the black line of the purfling...yes, folks they are supposed to touch the line. Notice the 15th fret dot is just shy of touching...big deal.

Image

What do guitar players see while they are playing? I would guess most bluegrass standup players see the mic, audience. For us "sit down" players, binding, purfling, strings, rosette, idunno .
Personally, I like to watch my finners and marvel that I can still make them move...
Getting the confidence? Practice, practice, practice.


These users thanked the author Haans for the post: bcombs510 (Mon Apr 02, 2018 6:46 pm)
Top
 Profile  
 
Aaron O
 Post subject: Re: Side dot jig....
PostPosted: Sun Apr 08, 2018 10:12 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Apr 14, 2008 3:20 am
Posts: 376
Location: Kapolei HI
First name: Aaron
Focus: Build
Status: Semi-pro
bcombs510 wrote:
sdsollod wrote:
Seems like I can't find a 2mm brad point bit anywhere...


Same here. The set of brad points that I have goes down to 1mm but the brad point stops as the 3mm bit. If you find a 2 or 2.5, please share!

I use my .093” downcut inlay bit, in the drill press. The “play” is because of the crappy drill press. Got a new one since.
https://m.youtube.com/watch?v=khjwDs8oOpc


These users thanked the author Aaron O for the post: bcombs510 (Sun Apr 08, 2018 10:48 pm)
Top
 Profile  
 
Colin North
 Post subject: Re: Side dot jig....
PostPosted: Mon Apr 09, 2018 1:01 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5501
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Aaron O wrote:
bcombs510 wrote:
sdsollod wrote:
Seems like I can't find a 2mm brad point bit anywhere...


Same here. The set of brad points that I have goes down to 1mm but the brad point stops as the 3mm bit. If you find a 2 or 2.5, please share!

I use my .093” downcut inlay bit, in the drill press. The “play” is because of the crappy drill press. Got a new one since.
https://m.youtube.com/watch?v=khjwDs8oOpc

I got my 2 mm brad points from Bosch, hex shank

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


These users thanked the author Colin North for the post (total 2): bcombs510 (Mon Apr 09, 2018 6:54 am) • Pmaj7 (Mon Apr 09, 2018 2:40 am)
Top
 Profile  
 
kwerry
 Post subject: Re: Side dot jig....
PostPosted: Tue Apr 10, 2018 10:24 pm 
Offline
Mahogany
Mahogany

Joined: Wed Mar 07, 2012 5:41 pm
Posts: 96
Location: Coquitlam, BC
First name: Kerry
Last Name: Werry
City: Coquitlam
State: British Columbia
Country: Canada
Focus: Build
Status: Amateur
Ok This is interesting...

Pop rivets?? do you just , well drill and Pop rivet? i would have thought the pressure might split something????

Kerry

nkforster wrote:
A few years back I spent a lot of time on making a jig that was perfect for a specific scale. Then I got really bored with working in large batches. It's just not for me.

Like the others, I do it by hand. Though I also do it almost all by eye. The distance between the frets I "split" and mark a vertical pencil line. That line, I split by eye, mark with whatever is handy - a brad, a nail, then drill with a 1.5mm bit. If I'm using pearl, it's a 1.5mm dot which looks very neat. Or if it's for export, I use a pop rivet, snip it off, sand it smooth and tap it flush. I "borrowed" that trick from Marty Jacobson, the mandolin maker. saw it on his blog or on a video. I forget. Clever feller Marty.

Nigel

http://www.nkforsterguitars.com

_________________
My Website http://klw-strings.com
My Luthier's Blog...http://klwstrings.blogspot.com
Top
 Profile  
 
nkforster
 Post subject: Re: Side dot jig....
PostPosted: Wed Apr 11, 2018 12:39 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Mar 05, 2011 6:20 am
Posts: 277
Location: North East England
First name: nigel
Last Name: forster
City: Newcastle upon tyne
Zip/Postal Code: ne12at
Country: england
Focus: Build
Status: Professional
You don't "pop rivet" anything. You just use the rivets as dot material.

The only pics I have are for the fretboard surface itself, but you get the idea. File the dot surface smooth, then tap flush, rather than trying to smooth after it is flush.

Image

Image

Image

Image

Image

Image


Nigel

http://www.nkforsterguitars.com/instrum ... or-guitar/

_________________
nigel

http://www.theluthierblog.com


These users thanked the author nkforster for the post: Pmaj7 (Wed Apr 11, 2018 12:51 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 30 posts ]  Go to page Previous  1, 2

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: Chris Pile, Mike Thomas and 47 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com