Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Sloppy rosette fit fix

Page 2 of 2

[ 31 posts ]

Go to page Previous 1, 2

Print view

Previous topic | Next topic

Author

Message

Ken Nagy

Post subject: Re: Sloppy rosette fit fix

Posted: Fri Mar 08, 2024 12:35 pm

Koa

Joined: Sat Mar 09, 2019 4:50 pm
Posts: 1295
Location: Goodrich, MI
First name: Ken
Last Name: Nagy
City: Goodrich
State: MI
Focus: Build
Status: Amateur

That's exactly the kind of thing that I wouldn't notice unless someone told me!

_________________
Why be normal?

Top

Duct Tape

Post subject: Re: Sloppy rosette fit fix

Posted: Fri Mar 08, 2024 4:06 pm

Mahogany

Joined: Thu Jan 12, 2017 6:14 am
Posts: 84
First name: Jon
Last Name: Snider
City: Colorado Springs
State: Colorado
Focus: Build
Status: Amateur

J De Rocher wrote:

Those look good for first rosettes. It looks like you've got the inlaying into the top part of it pretty well down. One thing that could use improvement for this style of rosette is to figure out a way to cut your tiles so that the radial edges are actually radial. Several of the spokes in each rosette don't line up with the center hole and it doesn't look like that was intentional.

It was not and you’re correct. I cut the pieces on a bandsaw after making a 30° jig. It became apparent as I dry fit them that it was off. Tried to fix on disc sander but clearly not perfect. Next time!

Top

J De Rocher

Post subject: Re: Sloppy rosette fit fix

Posted: Fri Mar 08, 2024 8:40 pm

Contributing Member

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2543
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington

Duct Tape wrote:

I'm wondering if your 30° jig is causing the problem. I don't know what your jig or rosette assembly process looks like, but when I've made that type of rosette, I divided 360° by the number of tiles and then divided that by 2 to get the angle to cut on each side of each tile. For a rosette with 12 tiles like your first one that would be 15° angles on each side of each tile.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter

Top

Duct Tape

Post subject: Re: Sloppy rosette fit fix

Posted: Sat Mar 09, 2024 5:06 pm

Mahogany

Joined: Thu Jan 12, 2017 6:14 am
Posts: 84
First name: Jon
Last Name: Snider
City: Colorado Springs
State: Colorado
Focus: Build
Status: Amateur

Each angle was 15°. But I think the total was a bit too wide when all are added. I’m going to p,any with the variables next time. Next time? Did I say that?

Top

Dave m2

Post subject: Re: Sloppy rosette fit fix

Posted: Sat Mar 09, 2024 6:14 pm

Cocobolo

Joined: Sun Oct 09, 2016 12:18 pm
Posts: 404
Location: Somerset UK
State: West Somerset
Country: UK
Focus: Build
Status: Amateur

Yes with us lot there always is a next time! We can't stop. Dave mo

Top

wbergman

Post subject: Re: Sloppy rosette fit fix

Posted: Mon Mar 25, 2024 8:32 am

Koa

Joined: Mon Dec 18, 2006 9:42 am
Posts: 1579
Location: United States

When I posted "Elmer's school glue" above I was referring to the white glue. I did not realize that they now also offer a clear glue, which I have not used for dusting. The clear glue is water soluble, so I would be hesitant to use it without testing.

Top

Page 2 of 2

[ 31 posts ]

Go to page Previous 1, 2

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 31 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: