Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Nov 25, 2024 9:16 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Sat Feb 13, 2021 10:46 am 
Offline
Walnut
Walnut

Joined: Wed Feb 10, 2021 11:14 am
Posts: 1
First name: guli
Last Name: kire
City: KOHIMA
State: Nagaland
Zip/Postal Code: 797001
Country: India
Focus: Build
Status: Amateur
hi,
Me and my friend are goin to do a project making a neck thru guitar with rosewood even the body with a rosewood,
I know it will be heavy but no idea about the resonance.

searching all over the internet about guitar completely made out of rosewood but didnt find any, the only thing i found was fender rosewood neck.

so any suggestion please.

thanks guys


Top
 Profile  
 
PostPosted: Sat Feb 13, 2021 11:52 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5821
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Pro tip: Don't waste the rosewood. Leave that for the real luthiers, will ya?

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: Hesh (Sun Feb 14, 2021 4:39 pm)
Top
 Profile  
 
PostPosted: Sat Feb 13, 2021 12:57 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2150
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
Thru neck guitars usually have one long neck stick and then some wings glued on to make it wide enough - it is a good way to use up scraps and you can do some nice things with contrasting woods. The design really doesn't lend itself to chambering or other weight reduction, I think you should just accept that its gong to be very heavy. Most of the thru neck instruments seem to be bass guitars. Don't forget that you have to build the geometry into the neck as you build the guitar - you have no wiggle room to set the neck angle. Melvyn Hiscock has a good description of a thru neck in his book and shows the geometry issues.


Top
 Profile  
 
PostPosted: Sat Feb 13, 2021 1:51 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Nov 24, 2008 12:17 pm
Posts: 1170
City: Escondido
State: CA
Zip/Postal Code: 92029
Country: USA
Focus: Build
Status: Semi-pro
A solid rosewood electric guitar will be a heavy guitar, and it is an aesthetic consideration. It is not going to have improved “resonance”.

That said, I know that all rosewood necks and even solid rosewood guitars are very trendy right now. It is odd to me that precisely when rosewood harvest is so problematic people are looking for non traditional exorbitant uses; but I doubt the ocasional home built guitar is contributing to the problem.

There are no special construction issues that I know of. If you want an 11lbs guitar, have the coin, and like the esthetics, you would just build it like you would if you were using any other hardwood.


Sent from my iPhone using Tapatalk Pro


Top
 Profile  
 
PostPosted: Sat Feb 13, 2021 4:34 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2150
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
Does the fact the Guli lives in India mean the rosewood is a reasonable option?


Top
 Profile  
 
PostPosted: Sat Feb 13, 2021 5:39 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2257
Location: Seattle WA
Focus: Build
Status: Semi-pro
If you have access to many pieces to choose from you could find some that was less dense or lighter. I'm sure that would sound better. Better yet, use Brazilian rosewood.

Pat

_________________
Pat


Top
 Profile  
 
PostPosted: Sat Feb 13, 2021 5:59 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Nov 24, 2008 12:17 pm
Posts: 1170
City: Escondido
State: CA
Zip/Postal Code: 92029
Country: USA
Focus: Build
Status: Semi-pro
I don’t think being in India makes an all rosewood solid body guitar any lighter, or alter the construction, but it might be cheaper.


Sent from my iPhone using Tapatalk Pro



These users thanked the author rlrhett for the post: Hesh (Sun Feb 14, 2021 4:40 pm)
Top
 Profile  
 
PostPosted: Sat Feb 27, 2021 10:12 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2522
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
gulikire wrote:
hi,
Me and my friend are goin to do a project making a neck thru guitar with rosewood even the body with a rosewood,
I know it will be heavy but no idea about the resonance.

searching all over the internet about guitar completely made out of rosewood but didnt find any, the only thing i found was fender rosewood neck.

so any suggestion please.

thanks guys


The Tele that George Harrison played in the Beatles' last public performance on the roof of Apple headquarters was an all rosewood guitar. Not a neck thru obviously being a Fender, but still all rosewood. Fender has made an all rosewood George Harrison Tele off and on ever since.

Warmoth makes electric guitar bodies and necks that are rosewood.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com