Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Speaking of truss rods

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

banjopicks

Post subject: Speaking of truss rods

Posted: Tue Jul 23, 2019 9:40 am

Koa

Joined: Tue Feb 26, 2008 6:19 am
Posts: 1560
First name: Richard
Last Name: Hutchings
City: Warwick
State: RI
Zip/Postal Code: 02889
Country: United States
Focus: Build
Status: Amateur

Why do they come .240" instead of .250"? I just checked that on the SM site and the width is .218, I have a cheap caliper so maybe I'm off but it still seems odd that it isn't 3/16 or 1/4"

I'm going to cut my rod slot on the table saw so it shouldn't be problem dialing it in. I was going to buy a bit for my router so I could stop the channel before the nut. Then I thought how easy it would be to just run it through the TS and put a filler block in and cover it with a nice overlay.

_________________
Hutch

Get the heck off the couch and go build a guitar!!!!

Top

Michaeldc

Post subject: Re: Speaking of truss rods

Posted: Tue Jul 23, 2019 10:12 am

Koa

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1484
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build

.218” = 7/32” which are available.

Top

phavriluk

Post subject: Re: Speaking of truss rods

Posted: Tue Jul 23, 2019 10:17 pm

Koa

Joined: Mon Feb 13, 2012 8:49 pm
Posts: 1041
First name: peter
Last Name: havriluk
City: granby
State: ct
Zip/Postal Code: 06035
Country: usa
Focus: Build
Status: Amateur

I'm guessing the wonky sizes are the result of 'offshore' manufacture. I've been using Martin truss rods which are sized in inches.

_________________
Peter Havriluk

Top

Woodie G

Post subject: Re: Speaking of truss rods

Posted: Tue Jul 23, 2019 10:34 pm

Koa

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1876
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro

Martin rods...1/4". We took the SM rod apart...easy milling of the channel with a 1/4" core box/roundnose bit and much beefier construction are why we use Martin rods (even when replacing a Gibson neck!).

_________________
For the times they are a changin'

- Bob Dylan

Top

TimAllen

Post subject: Re: Speaking of truss rods

Posted: Wed Jul 24, 2019 12:46 am

Contributing Member

Joined: Wed Aug 12, 2009 1:13 am
Posts: 448
First name: Tim
Last Name: Allen
City: San Francisco
Focus: Build
Status: Amateur

Thanks for that post, Mr. Guthrie. I too use Martin rods. Such a pleasure! I never used Stew-Mac rods, but I used Allied rods. Just fine except for random breakage of the welds.

The Martins rods are straightforward to install, reliable, and seem to operate perfectly.

_________________
Tim Allen
"Never hurry, never rest."

Top

Fasterthanlight

Post subject: Re: Speaking of truss rods

Posted: Wed Jul 24, 2019 3:51 am

Cocobolo

Joined: Wed May 04, 2016 4:17 am
Posts: 150
First name: Gary
Last Name: Leddington
Focus: Build
Status: Amateur

It's exactly 5.5mm... they are probably made in a metric land.

_________________
www.leddingtonguitars.com

Top

banjopicks

Post subject: Re: Speaking of truss rods

Posted: Wed Jul 24, 2019 12:34 pm

Koa

Well I bit the bullet and ordered the SM router bit. I like to stick with SM since I payed for free shipping, I can order thinks as I need them.

_________________
Hutch

Get the heck off the couch and go build a guitar!!!!

Top

Page 1 of 1

[ 7 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 79 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: