Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Number 16

Page 2 of 2

[ 31 posts ]

Go to page Previous 1, 2

Print view

Previous topic | Next topic

Author

Message

Casey Cochran

Post subject: Re: Number 16

Posted: Thu Jan 24, 2019 9:59 am

Contributing Member

Joined: Thu Oct 07, 2010 5:28 pm
Posts: 687
First name: Casey
Last Name: Cochran
City: Gainesville
State: GA
Zip/Postal Code: 30501
Country: USA
Focus: Build

sdsollod wrote:

That is a beauty Casey! How did you do the end wedge? Also, what gives the neck the dark look, is it a dark pore fill, stain, or perhaps a walnut neck?

I engraved the end wedge after the body was assembled and filled the engraving with a lacquer stick, available from Brownell's. The neck is stained Honduran Mahogany.

_________________
Good judgement comes from experience. Experience comes from poor judgement.

Top

sdsollod

Post subject: Re: Number 16

Posted: Thu Jan 24, 2019 8:12 pm

Koa

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur

That is awesome! You must have masked off your rosette before you sprayed the sunburst. How did you do it?

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com

Top

Casey Cochran

Post subject: Re: Number 16

Posted: Fri Jan 25, 2019 7:32 am

Contributing Member

Joined: Thu Oct 07, 2010 5:28 pm
Posts: 687
First name: Casey
Last Name: Cochran
City: Gainesville
State: GA
Zip/Postal Code: 30501
Country: USA
Focus: Build

sdsollod wrote:

That is awesome! You must have masked off your rosette before you sprayed the sunburst. How did you do it?

3M fine line tape, available at automotive paint and body supply shops. I brush lacquer onto the rosette and purflings after spraying the burst to level it up. I also have to brush some color onto the edge of the sound hole to even things up.

_________________
Good judgement comes from experience. Experience comes from poor judgement.

Top

sdsollod

Post subject: Re: Number 16

Posted: Fri Jan 25, 2019 10:40 am

Koa

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur

I have used fine line tape to mask off a rosette, but found that the tape wanted to wrinkle as it made the turns around the rosette. I got it to work, but it was a little problematic...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com

Top

cphanna

Post subject: Re: Number 16

Posted: Sun Jan 27, 2019 1:12 pm

Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA

I haven't clicked in for quite some time. What a beautiful instrument to find on my first day back!

Top

Clay S.

Post subject: Re: Number 16

Posted: Sun Jan 27, 2019 2:14 pm

Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968

"I have used fine line tape to mask off a rosette, but found that the tape wanted to wrinkle as it made the turns around the rosette. I got it to work, but it was a little problematic..."

Rather than bending the tape around the rosette you can mask it with straight strips of cellophane tape and cut around the edge with a razor blade.

Top

Page 2 of 2

[ 31 posts ]

Go to page Previous 1, 2

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 63 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: