Official Luthiers Forum! • View topic - Pore fill on neck

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Pore fill on neck - what method do you like?

Page 2 of 2

[ 30 posts ]

Go to page Previous 1, 2

Print view

Previous topic | Next topic

Author

Message

Arnt Rian

Post subject: Re: Pore fill on neck - what method do you like?

Posted: Fri Sep 08, 2017 2:27 am

Contributing Member

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway

Egg white here as well, what a relief to get away from epoxies and CA and whatnot. Necks don't need a lot of filling anyways, they are a lot more forgiving than backs and sides.

_________________
Rian Gitar og Mandolin

Last edited by Arnt Rian on Fri Sep 08, 2017 6:49 am, edited 1 time in total.

Top

Michael.N.

Post subject: Re: Pore fill on neck - what method do you like?

Posted: Fri Sep 08, 2017 3:55 am

Koa

Joined: Thu Sep 10, 2009 4:01 pm
Posts: 1887
Location: UK

Although open pores on back/sides look perfectly fine if satin or matte. Not even sure it's that bad on gloss but it's what we have become so accustomed to seeing. I suppose that's what the market expects. Certainly seen a lot of 19 th century guitars that are gloss and open pored.

Top

mountain whimsy

Post subject: Re: Pore fill on neck - what method do you like?

Posted: Fri Sep 08, 2017 9:19 am

Cocobolo

Joined: Mon Jan 14, 2013 3:25 pm
Posts: 341
Location: Bozeman, MT
First name: Tony
Last Name: Thatcher
City: Bozeman
State: MT

CA glue, then a light sand. Then build up Nitro coats. They seem to build faster on the neck than the body. I've been curious about the Aqua Coat. I generally use epoxy on the body.

_________________
Tony Thatcher
Bozeman, Montana

Top

AndyB

Post subject: Re: Pore fill on neck - what method do you like?

Posted: Mon Nov 27, 2017 1:24 am

Cocobolo

Joined: Fri Jan 15, 2016 9:04 pm
Posts: 315
First name: Andy
Status: Professional

Joe Beaver wrote:

For the body I spread with a squeegee pretty much as Todd Stock shows.

I was doing a bit of epoxy pore fill research. This guy Todd Stock seems to be frequently referenced, at least in regards to having the best methods and explanations for epoxy pore filling. Only problem is, where is his material? None of my searches bring up the actual material. Oddly though, if I search for his name, I see lots of people talk about this guy but no actual posts with his name. Is this guy a ghost?! Anyway any links actual content on Todd's epoxy method would be appreciated.

Thanks,

Andy

Top

bcombs510

Post subject: Re: Pore fill on neck - what method do you like?

Posted: Mon Nov 27, 2017 7:04 am

Brazilian Rosewood

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3613
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur

AndyB wrote:

Joe Beaver wrote:

For the body I spread with a squeegee pretty much as Todd Stock shows.

https://m.youtube.com/watch?v=YYHxMg7n9cI

https://m.youtube.com/watch?v=gc5hN3gTONM

https://m.youtube.com/watch?v=Z4fF36M33-w

Brad

Sent from my iPhone using Tapatalk

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars

Top

Page 2 of 2

[ 30 posts ]

Go to page Previous 1, 2

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: Gary Davis and 30 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: