Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 28, 2024 11:27 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 13 posts ] 
Author Message
PostPosted: Mon Jan 23, 2017 11:57 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
A good friend has a sweet 1890's Washburn parlor in need of a little TLC. I'm working on upping my game with really quality vintage guitar repair/restoration and this little guitar needs the love, and offers a lower risk opportunity to practice some of the skills I've been learning.

It came to me right after suffering really low humidity, 16% for a long weekend, and after suffering assault from a falling guitar stand that cracked the soundboard at the soundhole edge. Upon looking inside, and out, we found a few other areas that need attention.

I'll first share where it's at, and then try to document the process and final work. I'll welcome any tips or opinions along the way.

Image

Image


Last edited by dpetrzelka on Mon Jan 23, 2017 1:21 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 12:01 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Soundhole damage from a stand that fell on this sweet little guitar.

Image

Image


Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 12:10 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Side cracks from either or both low humidity and/or the falling stand.

Image

Image


Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 12:14 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2109
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
Yikes. Looks like a great project.


Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 1:01 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
To get a good look inside, I removed the LR Baggs mic - not a lot or room in this little parlor, and even less with a pickup installed. My friend wanted it out anyway.

Image

With endpin jack out, I'll want to fix this oversized hole. I could just use an oversized endpin, but I would like to do a proper patch and replace with similar BRW end wedge.

Image


Last edited by dpetrzelka on Mon Jan 23, 2017 1:46 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 1:20 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
And now it gets good.

Clearly more than one person has worked on this instrument before me - I could see the splicing and crack repair from the top, but images from the box tell us more:

Re-braced top - with old tape, new lattice bracing, and misc. glue remnants.


Image

Image

Image


Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 1:21 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
More of the bracing, and a bridge plate that has seen better days.

Image

Image


Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 1:25 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Here is evidence of the risks in using CA to repair side crack. It can work wonders, but it can also leak into the box leaving a unsightly glue runs.

Sometimes we must carefully undo the not-so-carefully-done work of others.

Image

Image

Image


Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 1:28 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Someone had installed a very smart-looking ebony pyramid bridge - but I suspect the lack of slotting might have led to the bridge plate splitting.

Image

Image


Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 1:37 pm 
Offline
Koa
Koa

Joined: Mon Jul 11, 2005 5:17 am
Posts: 1011
Location: United States
City: Tyler
State: Texas
Wow. The inside looks like it doubled as an ash-tray.


Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 1:53 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Jun 21, 2009 6:14 pm
Posts: 439
First name: Mike
Last Name: Imbler
City: Wichita
State: KS
Zip/Postal Code: 67204
Country: usa
Focus: Build
Bummer! I see from the label that it is probably out of warranty!



These users thanked the author Imbler for the post: dpetrzelka (Mon Jan 23, 2017 1:58 pm)
Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 3:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7380
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
A lot of challenges there, looking forward to following along on this one.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Mon Jan 23, 2017 7:20 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Jun 07, 2010 11:14 am
Posts: 109
First name: Jan-Alexis
Last Name: Tremblay
City: Montreal
Country: Canada
Focus: Build
Status: Amateur
That's an exciting project. Keep us posted!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com