Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Nov 22, 2024 5:08 am


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Upper transverse bracing
PostPosted: Mon Apr 11, 2016 11:17 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3592
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Hello,

I'm building a tenor uke, the first one from scratch for me. I've built a couple of the SM uke kits.

I searched here and it seems about 50 / 50 in favor or radius the top or flat. I put a 30' radius on the rims and glued the waist and fan braces on after radiused to 30'. I glued them up in a radius dish / go bar just like I use on guitar.

Question: When building a guitar I've put the upper transverse brace on flat to try to avoid a gap at the fretboard extension. Do the same for the Uke? It seems like it would be the same, but I'm curious if others do the same?

Thanks!
Brad

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
PostPosted: Mon Apr 11, 2016 12:08 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Dec 18, 2008 11:42 am
Posts: 1135
Location: Hudson, MA
First name: Kevin
Last Name: Quine
City: Hudson
State: MA
Country: Usa
Focus: Build
Status: Amateur
I use an upper transverse brace on my ukes. I make it the same size as the lower transverse



These users thanked the author Quine for the post: bcombs510 (Mon Apr 11, 2016 12:30 pm)
Top
 Profile  
 
PostPosted: Mon Apr 11, 2016 12:30 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3592
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Quine wrote:
I use an upper transverse brace on my ukes. I make it the same size as the lower transverse


Does that mean radiused the same as well? :)

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
PostPosted: Mon Apr 11, 2016 5:10 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Tue Mar 14, 2006 12:41 pm
Posts: 317
Location: Trois-Rivieres
First name: Alain
Last Name: Lambert
City: Trois-Rivieres
State: Quebec
Country: Canada
Focus: Build
Status: Amateur
I radius mine to 30 ft also. The Uke is so small you can barely see the radius, I do not remember any problem fitting the neck/FB. May be a little sanding to get the area under the FB flat. Assuming you extend the FB to the sound hole.



These users thanked the author Alain Lambert for the post: bcombs510 (Tue Apr 12, 2016 1:07 pm)
Top
 Profile  
 
PostPosted: Tue Apr 12, 2016 1:07 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3592
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Thanks. I went ahead and glued it on flat for this one, let's see how it goes. :)

Thanks!
Brad

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com