Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Dec 12, 2024 10:09 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 48 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Homemade tools
PostPosted: Wed Sep 11, 2013 3:40 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 05, 2013 12:57 pm
Posts: 903
Location: London, England
Focus: Build
Status: Amateur
Don't worry, Chris, I'm about to lower the standard on display considerably!

Beth,
Sorry for the delay, here is the fret bender... Tis ugly as sin but it worked! :)

Bolts, wingnuts, washers, and these http://www.ebay.co.uk/itm/4-x-Replacement-Shower-Door-ROLLERS-Runners-Wheels-V-Grooved-19mm-Dia-LW19-/281049030019?pt=UK_Home_Garden_Bathroom_Shower_Units_PP&hash=item416fd3dd83.
(The right roller is secured in an elongated slot by a wingnut, and slides up and down to change the radius.)

Thinking about it now, maybe it's best to slide the washers up and down rather than the roller.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Wed Sep 11, 2013 9:07 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat May 17, 2008 1:11 pm
Posts: 2375
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build
Great stuff here!

Filippo, the elegance of your tools has always blown me away.

I'm putting the final touches on a table saw sled fixture for cutting neck tenons, with an adjustable angle.

I also have a simple sled for cutting the taper on fretboards and vanilla jigs for rosettes and bridge slots.

Pat

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Wed Sep 11, 2013 10:02 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Sep 24, 2008 8:55 pm
Posts: 3820
Location: Taiwan
First name: Tai
Last Name: Fu
City: Taipei
Country: Taiwan
Focus: Repair
Status: Semi-pro
I have some...

A router sled for planing large pieces of wood (such as a table top)... Note the spiderweb because I don't actually build that many tables... the shop isn't big enough.

Attachment:
1.jpg


My new workbench. There's nothing heavy enough in Taiwan, so I made my own out of discarded floor board.

Attachment:
2.jpg

Attachment:
3.jpg


A Wells Karol jig made from plexiglass, because I can't find UMHW and nobody knows what it is. It works well enough. Also below that: a bending iron. The wells karol jig is permanently attached to a router base so all I need to do is slide the motor in.

Attachment:
4.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Cat-gut strings are made from kitten guts, stretched out to near breaking point and then hardened with grue saliva. As a result these give a feeling of Pain and anguish whenever played, and often end up playing themselves backwards as part of satanic rituals.

Typhoon Guitars
http://www.typhoon-guitars.com


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Wed Sep 11, 2013 11:23 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
That's a pretty excellent idea keeping the router base attached to the circle jig, Tai-Fu. I never thought of buying additional bases, I just bought more routers so I didn't have to attach jigs. Your way is much cheaper I would reckon.

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Wed Sep 11, 2013 11:30 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Sep 24, 2008 8:55 pm
Posts: 3820
Location: Taiwan
First name: Tai
Last Name: Fu
City: Taipei
Country: Taiwan
Focus: Repair
Status: Semi-pro
By the way that only works for certain models... sometimes you can't always buy bases for a given router. I use the Rexon/Jepson Taiwanese trimmers where the base sells for about 6 dollars a piece, vs. the machine itself (which is about 30 dollars), so it makes sense to dedicate bases rather than whole routers. However I do have a Dewalt Laminate trimmer that I can't find bases for... only places I found wants 50 dollars for it and I actually paid less on the laminate trimmer itself... but then again it was used/display model.

_________________
Cat-gut strings are made from kitten guts, stretched out to near breaking point and then hardened with grue saliva. As a result these give a feeling of Pain and anguish whenever played, and often end up playing themselves backwards as part of satanic rituals.

Typhoon Guitars
http://www.typhoon-guitars.com


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Wed Sep 11, 2013 4:14 pm 
Offline
Walnut
Walnut
User avatar

Joined: Tue Aug 06, 2013 12:32 am
Posts: 21
Location: Wonder Lake, Il
Focus: Repair
Status: Amateur
Here is the noticed straightedge I made. I use a drafting square cut down to 19" with the end removed. I leveled it with the leveling beam, cut the notches and file the smooth. It straight it's homemade and best, it was only $10.
Image
011 by Bohdan79, on Flickr


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Wed Sep 11, 2013 4:34 pm 
Offline
Koa
Koa

Joined: Thu Jan 24, 2008 2:13 am
Posts: 902
Location: Caves Beach, Australia
Nice bench Tai !!



These users thanked the author Jeff Highland for the post: Glenn_Aycock (Thu Nov 09, 2017 8:00 am)
Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Wed Sep 11, 2013 4:54 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Really nice job on the work bench, Tai! [:Y:]

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Wed Sep 11, 2013 6:30 pm 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
I'm glad this thread is growing. So many useful ideas already posted here. I'm looking forward to more.


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Wed Sep 11, 2013 7:12 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 13, 2010 12:46 am
Posts: 1247
First name: Beth
Last Name: Mayer
City: Tucson
State: AZ
Country: United States
Focus: Build
Status: Amateur
Jeff Highland wrote:
Nice bench Tai !!


+1


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Thu Sep 12, 2013 4:58 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway
Filippo Morelli wrote:
Cripes that is simply brilliant. I think I own 7 laminate trimmers now. Looks like I can buy bases at 1/3 the price of the whole shebang.

$30 for a Bosch Colt base.

Filippo


I have several Bosch Colt bases mounted to various jigs, and the cutters are pretty much permanently mounted in their trimmers. Instead of switching bits for different operations, I move the trimmers around from base to base. I've thought about getting a few extra bases, but as you can get those Colts pretty inexpensively on eBay all the time, I have bought extras to give me even more options for router bits.

Actually, I wish I'd done the same thing years ago, when the PC 310 was still being produced and not too expensive. Now, of course, I'm locked into using Colts for pretty much everything (my single PC310 only gets used for pattern routing, and a few other routers for similar single service tasks). The quality of the Colt is passable, but I do wish the height adjustment was a bit more precise, and I don't think it runs as true as the PC. I understand Rigid makes a better tool in the same class, it might be a better candidate if you are going to focus on a single model of trimmers.

_________________
Rian Gitar og Mandolin


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Thu Sep 12, 2013 5:36 am 
Offline
Walnut
Walnut
User avatar

Joined: Tue Aug 27, 2013 7:55 am
Posts: 19
First name: Christophe
Last Name: Mineau
City: Louannec
State: Brittany
Zip/Postal Code: 22700
Country: France
Focus: Build
Status: Amateur
Hi,
Nice thread, I am a big fan of DIY, and I must admit I often build myself good ideas taken here and there.
I do not always do that for economical reasons, it's most of the time simply because I feel like doing it !

The one I am the most proud of is this one :
Image
Do you recognize it ? :D . And very efficient indeed !

I have also this one, which is funny, thought it is not the most straight forward way to build it, but I wanted to try this "3D printer like" method :
http://www.labellenote.fr/articles.php?lng=en&pg=87
Image

I have my thickness sander, which embeds a compilation of all the goods ideas I found + some original tricks from me :
http://www.labellenote.fr/articles.php?lng=en&pg=260
Look at the bottom the geared table lifter !

And sometimes, there is no need for high end technology to get good tools : I have my paper made personal string action gauge:
http://www.labellenote.fr/download.php?lng=en&pg=56

And some other stuff :
mm <-> inch converter : http://www.labellenote.fr/articles.php?lng=en&pg=262

Soft jaws for a metal vice : http://www.labellenote.fr/articles.php?lng=en&pg=75

And I have lots of other for wood turning, but I stop here ...

_________________
Christophe Mineau
Let's make chips ! - http://www.labellenote.fr


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Thu Sep 12, 2013 6:14 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 05, 2013 12:57 pm
Posts: 903
Location: London, England
Focus: Build
Status: Amateur
That geared table lifter is brilliant! Will have to put that on mine.


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Mon Aug 31, 2015 9:52 pm 
Offline
Walnut
Walnut

Joined: Mon Aug 31, 2015 9:12 pm
Posts: 4
landrover wrote:
A must see. Homemadetools.net. . Click on "new tools", and just go page by page . AWESOME!!!!!


Jon here from HomemadeTools.net.

I know this thread is an old one, but thanks for the kind words :)

To celebrate our 20,000th homemade tool, we made a new ebook featuring our top 50 homemade tools. You guys are welcome to it for free:

http://download.homemadetools.net/50MustReadTools.pdf

Image



These users thanked the author homemadetools for the post (total 2): Bob Garrish (Thu Sep 03, 2015 11:05 am) • hermit (Mon Aug 31, 2015 10:33 pm)
Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Tue Sep 01, 2015 12:12 am 
Offline
Mahogany
Mahogany

Joined: Wed Jun 29, 2011 9:34 am
Posts: 52
First name: Steve
Last Name: Blower
City: Keighley
State: West Yorkshire
Country: UK
Focus: Build
Status: Amateur
landrover wrote:
A must see. Homemadetools.net. . Click on "new tools", and just go page by page . AWESOME!!!!!


Great link, thanks.

[:Y:]


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Tue Sep 01, 2015 6:30 am 
Offline
Koa
Koa

Joined: Sun Jul 26, 2009 9:37 am
Posts: 697
First name: Murray
Last Name: MacLeod
City: Edinburgh
Country: UK
homemadetools wrote:
To celebrate our 20,000th homemade tool, we made a new ebook featuring our top 50 homemade tools. You guys are welcome to it for free:

Thanks for making the download available, but am I correct in thinking there are only 27 tools on the PDF , not the 50 as it says in the title?


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Tue Sep 01, 2015 6:39 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Chris Pile wrote:
Man, I trained as a tool maker and have been doing luthier stuff since the 70's. I thought I'd post some of my useful handmade tools, but I'd look like a chump. Mine function well, but they aren't beautiful like what I see here.


Right there with ya.....I was taught functional for the shop, fancy for the client. Most of my tools are highly functional but look rather crude.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Tue Sep 01, 2015 9:38 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
A couple months back I ordered some O1 tool steel, and made up a violin knife and 1/2 chisel for brace carving. I'm fortunate enough to have several old glass kilns in the shop with digital temperature controllers, making tempering and annealing at home pretty easy. Tested the tools on an old Brinell hardness tester - came pretty close to my target of 62 Rockwell - hit 61.7.

Image

Image

Image


Image



These users thanked the author dpetrzelka for the post: Glenn_Aycock (Thu Nov 09, 2017 8:05 am)
Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Thu Sep 03, 2015 11:40 pm 
Offline
Walnut
Walnut

Joined: Mon Aug 31, 2015 9:12 pm
Posts: 4
murrmac wrote:
homemadetools wrote:
To celebrate our 20,000th homemade tool, we made a new ebook featuring our top 50 homemade tools. You guys are welcome to it for free:

Thanks for making the download available, but am I correct in thinking there are only 27 tools on the PDF , not the 50 as it says in the title?


You're very welcome. Should be 50 tools spread out over 27 pages. Image


Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Fri Sep 04, 2015 12:01 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3598
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur
Here's a quick and easy one: Take an old x-acto blade and grind it to a chisel point. The blade thickness just happens to match standard fret slot width, so it's good for cleaning dust out of them (although a vacuum is even better if you have one handy). Also good for cutting tiny grooves in things.



These users thanked the author DennisK for the post: Pmaj7 (Wed Nov 08, 2017 8:17 pm)
Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Wed Nov 08, 2017 2:53 pm 
Offline
Walnut
Walnut

Joined: Mon Aug 31, 2015 9:12 pm
Posts: 4
Hey guys - we have a new ebook out: How to Make a Belt Sander. 100% free of course. Click the graphic below to check it out:

Image



These users thanked the author homemadetools for the post: RogerC108 (Wed Nov 08, 2017 5:24 pm)
Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Wed Nov 08, 2017 3:51 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2109
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
Very cool. I love it!

I gotta tell you though... I had to back off of making all sorts of stuff like this... It quickly morphed into a hobby of it's own.. I was spending all my free time on rehabbinh old rust and making cool luthier related jigs and tools.... And I forgot to build guitars... I lost almost 2 years of buildimg guitars before I came to my senses. ;) ;)



These users thanked the author truckjohn for the post: Bryan Bear (Wed Nov 08, 2017 4:05 pm)
Top
 Profile  
 
 Post subject: Re: Homemade tools
PostPosted: Wed Nov 08, 2017 4:10 pm 
Offline
Walnut
Walnut

Joined: Mon Aug 31, 2015 9:12 pm
Posts: 4
Yup, we've definitely noticed that. All hobbies are gateway drugs to homemade tool making.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 48 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 48 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com