Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Nov 24, 2024 4:38 pm


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: My First Rosette Inlay .
PostPosted: Fri Jun 10, 2011 11:27 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Ok so this is my first effort at rosette inlay . I routed the slot with a laminate router I bought for this , and adapted to make a circle . I did route sllightly to large . just the hint of a opening in the wood . SO I used Tite Bond Orig. and added some black die to see if it would blend in . I got a lil carried away and used to much glue . [headinwall] laughing6-hehe

Soooooooooo now to scrape !

Attachment:
100_1092.jpg
Attachment:
100_1093.jpg




I would Welcome any Suggestions on ways I could Improve my efforts . Seems from my viewpoint its just a matter of experience . However , please , suggestions are welcome


You do not have the required permissions to view the files attached to this post.

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Fri Jun 10, 2011 1:47 pm 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
Yo, Wud, I can't tell from your photo if you painted a little shellac sealer in and near the inlay channel before gluing. That would make clean up quite a bit easier, so try it next time if you didn't this time. I'm sure others with lots more experience than me will chime in with other ideas. It looks to me like you did a real nice job making your rosette. Cheers,
Patrick


Top
 Profile  
 
PostPosted: Fri Jun 10, 2011 3:37 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Scraped and sanded

Attachment:
100_1094.jpg



Quote:
Yo, Wud, I can't tell from your photo if you painted a little shellac sealer in and near the inlay channel before gluing. That would make clean up quite a bit easier, so try it next time if you didn't this time. I'm sure others with lots more experience than me will chime in with other ideas. It looks to me like you did a real nice job making your rosette. Cheers,
Patrick


No I didnt try shellac , thanks for the idea. And thanks for the compliment on the rosette , I toiled long and hard over deciding which one to buy ! laughing6-hehe


You do not have the required permissions to view the files attached to this post.

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Fri Jun 10, 2011 5:46 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Sound Hole Cut out and bound with the same material I am binding Guitar . Scraped and sanded .

Attachment:
100_1096.jpg


You do not have the required permissions to view the files attached to this post.

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Fri Jun 10, 2011 6:30 pm 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
You bought it! Well, I guess the joke is on me! That's totally okay, though. My first rosette was one I made myself, and my skills weren't up to the task at that time. Frankly, it sucked. Or let't be generous and say it was rustic. You get the idea. I probably should have bought mine too. Doesn't matter. It's your guitar, your rosette, and I think you did a good job of cleaning it up. It'll be easier next time. Let's see this guitar when you've got her finished.

Cheers,
Patrick


Top
 Profile  
 
PostPosted: Sat Jun 11, 2011 8:02 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
cphanna wrote:
You bought it! Well, I guess the joke is on me! That's totally okay, though. My first rosette was one I made myself, and my skills weren't up to the task at that time. Frankly, it sucked. Or let't be generous and say it was rustic.
Cheers,
Patrick



I am not sure I want to try and make my own Rosettes , I get frusterated with intricate work like that " big countryboy fingers" . I may some day who knows . But for now , Im just happy to be doing the Basic stuff . I do appreciate the comments . I will try the shellac Idea next time , Thanks ! [:Y:]

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 55 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com