Official Luthiers Forum!

I hope this link will work for the photo, if not please let me know. I need too know how to hook up the pickups. Thanks for your time and trouble, Owln

you need to ask a question to get an answer....

_________________
~shad peters

http://www.flickr.com/photos/petersinstruments/
http://petersinstruments.blogspot.com/
http://petersinstruments.com/

sorry i did not see the comment on your attachment, take a look at this http://www.seymourduncan.com/support/wi ... h_2v_2t_3w

_________________
~shad peters

http://www.flickr.com/photos/petersinstruments/
http://petersinstruments.blogspot.com/
http://petersinstruments.com/

thanks for the link but I have 5 wires coming from the neck pickup and 3 from the bridge pickup.Just a little confused, I've looked at about all the wiring diagram I can find and none really tells me much. owln

Your bare wire in your diagrams is a ground, so it just goes to the closest ground you can find. Your neck picup is a 4-wire humbucker and your bridge is a 2-wire humbucker. The 4-wire humbucker allows for coil splitting. If you don't know what that is, then you need to check with the manufacturer on their wiring because you need to link the two coils together making it a 2-wire. look at the diagram here http://www.guitarelectronics.com/product/WD2HH3T22_00/Guitar-Diagram-Gibson-2-Humbuckers-2-Volumes-2-Tones-3-Way-Toggle-Switch-View-Download-Free
You need to know which colors are your north finish and your south finish on the neck pickup, but your bridge has the coils linked inside the pickup. Hope that helps.
John

_________________
John Thiessen
http://www.iszacguitars.com

Thanks that has help a lot Best wishes and may God Bless. Howlin Owln